GX16 Connector Set, 3P

In Stoc

Provides a secure and stable connection for technical equipment in demanding environments, the contacts offer very good conductivity and resistance to oxidation, the threaded fastening reduces the risk of loosening due to vibrations, panel mounting is easy with a 15.5 mm hole, the orientation system and pin markings prevent incorrect connection.

9.30 RON

GX16 connector set, 4P

In Stoc

GX16 4-pin connector for quick and secure connection between cable and equipment, ideal for technical applications and demanding environments. Threaded fixing ensures firm locking, panel mounting requires 15.5 mm hole, orientation system prevents incorrect insertion, and pins are numbered for easy wiring. Includes male and female plug.

7.62 RON

GX16 connector set, 10-pin

In Stoc

Provides a secure and stable connection for industrial and electronic applications, with 10 pins and gold-plated copper contacts for high conductivity and resistance to oxidation. Threaded fastening provides a firm hold, panel mounting is done in a 15.5 mm hole, and the orientation system and pin numbering simplify alignment and correct wiring.

9.55 RON

Transformer AC 220V to 24VAC, 10W, CX4824

In Stoc

AC transformer for powering equipment at 24VAC from the 220V network, 10W, with EI type insulation and magnetic core for stable operation. The enameled copper coil offers efficiency and durability over time, the open type construction allows natural cooling. 220VAC input on red wires, 24VAC output on blue wires, without strict polarity.

32.45 RON

16.8V 2A Lithium 4S power supply with LED

Power supply 16.8V, Lithium 4S compatible, 2A, with LED status indicator, 220VAC

In Stoc

220VAC wall socket power supply with stabilized 16.8VDC output, ideal for charging 4S lithium batteries in electronic projects. Provides current up to 2A, has a 5.5x2.1mm cylindrical plug and LED status indicator, red when charging, green when fully charged. Recommended for users with basic technical knowledge.

45.40 RON

1-3V to 3.3V step-up module, HW626

In Stoc

Compact step-up module for stable 3.3V power supply from low 1-3.3V sources, ideal for sensors, microcontrollers and portable projects. Offers fixed 3.3V output, current up to 500mA, operating frequency 150kHz and conversion efficiency up to 85%, with 2.54mm pitch pins for fast integration.

3.24 RON

40 Dupont threads 10cm, Father-Mother

In Stoc

Set of 40 Dupont Male-Female 10cm wires, ideal for quickly connecting modules and components on breadboards in prototyping and testing. Provides stable connections through connectors on both ends, easy storage in a bundle, simple identification of routes thanks to different colors, suitable for Arduino, Raspberry Pi and other electronic projects.

7.73 RON

UPS module 12V, lithium battery 3.7V

In Stoc

Compact 12V backup solution for equipment, boosts the voltage from a 3.7V Li-ion battery to 12V and charges the battery from a 5-12V supply, automatically switches to battery when voltage drops and returns to charging when re-powered. Provides up to 9W with 1A peak current, supports 1S batteries up to 8Ah by default or 15Ah via jumper, dimensions 50x20x6.3mm.

15.17 RON

Boost module 3-6V to 12V, 3A, 8W

In Stoc

It efficiently converts 3-6V to 12V for fast powering of modules and equipment at 12V from low power sources, provides up to 8W at 5V 2A input with output up to 0.8A, accepts input current up to 3A and starts from 2.5V, has on-board status LED and compact format 24 x 15 x 7 mm.

9.08 RON

MT3608 voltage booster module, with USB, 2-24V

In Stoc

Compact DC-DC step-up converter for projects that require a higher voltage than the supply voltage, raises 2-24V to an adjustable 5-28V output via multi-turn potentiometer. Powered by USB Type-C or MicroUSB depending on the batch, output current up to 2A with adequate cooling and efficiency up to 93%, ideal for Arduino, sensors and electronic modules.

4.91 RON

DC voltage booster module XL6009, 5-35V, 4A

In Stoc

DC-DC step-up module for increasing voltage from 3-30V sources to an adjustable 5-35V output, ideal for powering electronic equipment from batteries or low-voltage sources. Offers up to 4A, conversion efficiency up to 94% and 400KHz switching frequency for good stability, in a compact 43x21x14mm format.

6.85 RON

XL6009 DC voltage booster module with display, 5-52V, 4A

Out-of-Stock

MT3608 voltage booster module, 5-28V, 2A

Out-of-Stock

Efficiently converts a low voltage to a higher one for electronic projects and portable power supplies, accepts 3-24V DC input and provides adjustable 5-28V DC output from the potentiometer, high efficiency up to 93% for minimal losses, delivers up to 2A with recommended use up to 1A, compact format 36 x 17 x 14 mm easy to integrate into assemblies.

9.68 RON

SX1308 Boost Module, 2-28V, 2A, 1.2MHz

In Stoc

Compact step-up DC-DC converter, ideal for powering electronic projects when you need a higher voltage, offers potentiometer-adjustable output between 2 and 28V from a 2-24V supply, delivers up to 2A depending on cooling and load, switches at 1.2MHz for good stability and can reach efficiency up to 95%.

3.62 RON

16-channel capacitive touch sensor module TTP229

In Stoc

16-channel capacitive touch sensor module, ideal for touch panels and automation projects with Arduino or other boards. It operates at 2.4-5.5VDC , offers settings for output mode and key configuration, includes low power or fast response options, has a compact 49 x 64.5 mm format for easy integration.

9.78 RON

8CH TTP226 Capacitive Touch Sensor Module

In Stoc

The 8-channel TTP226 module adds capacitive touch controls to Arduino projects or other controllers, detects touch even through a shield panel, offers status LEDs for each channel, adjustable sensitivity in 64 steps, and a wide 2-5 V supply. It can work in parallel or serial mode via jumper, reducing connections to just 4 pins.

9.62 RON

Adjustable step-down power supply module, 100W, 12A, 0.8-30V

In Stoc

Adjustable step down power supply for stable power supply of electronic projects, provides adjustable DC voltage between 0.8 and 30V from a 5-30V input, delivers up to 100W with maximum current 12A, high efficiency up to 95% and integrated short circuit and temperature protections. Includes pads for activating the fan with voltage selection on input or output.

27.41 RON

Step-down power supply module, adjustable, 150W, 6A, 7-32V

In Stoc

Adjustable step-down module, ideal for a stable DC source up to 6A, 7-32V input and 0.8-28V output, maximum power 150W with efficiency up to 95%. Fine adjustment of voltage and current from potentiometers, output short-circuit protection and low ripple for sensitive applications. Suitable for battery charging, LED driver and compact laboratory power supply.

27.56 RON

Out-of-Stock

Thermostat module 12V, 999C, XH-W1315

Out-of-Stock

Automatically control heating or cooling of equipment with this 12VDC thermostat module, with relay switching for on/off. Offers two working modes H and C, wide measurement range -30 to 999 degrees C, simple adjustment with buttons, 1 degree resolution and accuracy of approximately plus or minus 2 degrees, compact format for quick integration.

97.99 RON

UPS booster 3.7V to 9V module - 50x20x6.3mm

UPS module 9V, lithium battery 3.7V

In Stoc

Provides 9V UPS power for sensitive equipment, raises the voltage from a 3.7V Li-Ion battery and charges it automatically, instantly switches to battery upon power outage and returns to charging upon re-powering. Accepts 5-12V input, delivers up to 9W with 1A peaks, supports 1S batteries up to 8Ah or 15Ah via jumper, compact size 50x20x6.3 mm.

21.28 RON

1-5V to 5VDC voltage booster module

In Stoc

Compact DC-DC converter for voltage increase, ideal for powering modules and sensors to 5V from sources between 1 and 5V. It offers stable 5V output, current up to 600mA and high efficiency up to 96%, on a small board of 17.5 x 25 x 5.8 mm, easy to integrate into portable and industrial projects.

4.03 RON

5 Channel Line Tracking Module with Bumper, TCRT5000

In Stoc

TCRT5000 5-sensor IR module for line-following robots, accurately detects black paths and provides digital output on each channel with status LED. Integrates bumper endstop for obstacle contact detection and front IR emitters for distance detection. 5V power supply, compatible with Arduino and other development boards, PCB 130 x 33 x 10 mm.

15.79 RON

Line tracking mode, 8 channels, Analogue

Line tracking module, QTR-8RC, with 8 IR channels, Analog, 3-5V

In Stoc

The 8-channel analog line tracking module, ideal for line robots, accurately detects the path through infrared sensors. It operates at 5V, provides analog outputs that are easy to read by the microcontroller, allows for fine contrast calibration and interpretation, and the QTR8 configuration covers different bandwidths for stable and fast tracking.

15.19 RON

Sunlight tracking mode

In Stoc

Ideal for automating the orientation of solar panels, this module tracks the light source using two probes and the shadow principle, controlling the motor clockwise or counterclockwise until the lighting is balanced. It is mounted directly on the board, the motor is powered separately, includes a delay to reduce vibrations, operates at 5-5.5V DC with consumption below 1.5A, 15 cm probe cable.

36.48 RON

VL53L0X time of flight module

In Stoc

Time of flight mode for precise infrared distance measurement, calculates the return time of the beam for stable results up to 2 m. It operates at 2.8-5 VDC, responds quickly under 30 ms, communicates easily via IIC and has low consumption, suitable for robots, automation and proximity detection in compact spaces.

17.04 RON

Original IRF540N MOSFET

In Stoc

Original power MOSFET, suitable for fast switching and load control in sources, converters and motor drivers. Offers 100V between drain and source, up to 33A maximum current, low Rds(on) resistance at Vgs 10V for lower losses, TO-220 package for robust mounting and efficient dissipation, manufactured by Infineon Technologies.

7.10 RON

MosFet STP55NF06 P55NF06

In Stoc

N-channel power MOSFET for fast switching in switching power supplies, motor drivers and automotive applications, supports 60V and up to 50A, has low Rds(on) resistance for low losses and better efficiency, TO-220 package for easy mounting and efficient dissipation, suitable for safe control of inductive and resistive loads.

5.87 RON

Female audio plug with thread, PJ392 3.5mm

4mm Banana Plug, Female, Black

In Stoc

4mm female banana connector for quickly making test and power connections in electronic applications, allows panel mounting for fixed installation and easy access, has 5mm mounting diameter, robust black housing for easy identification, stable contact for repeated connections.

1.77 RON

4mm Banana Plug, Female, Red

In Stoc

4 mm female banana connector, ideal for making quick and secure connections in test and laboratory equipment. Allows panel mounting for clean integration into housings and control panels, has a 5 mm mounting diameter, stable contact for signal or power, red finish for easy polarity identification.

1.77 RON

Female Plug 5.5x2.1

In Stoc

DC female connector 5.5x2.1 for power supply, ideal for electronic projects and industrial equipment. Panel mount with hole fixing for stable mounting, requires 14 mm hole, provides firm contact and reliable connection, suitable for quick wiring and easy maintenance.

1.51 RON

Voltage booster module 1-5V to 5V, HW626

1-5V to 5V step-up module, HW626

In Stoc

Compact step-up module that converts 1-5V DC to stable 5V, ideal for powering Arduino projects, sensors and USB devices from low voltage batteries. Provides up to 500mA depending on input voltage, operates at 150kHz for efficient conversion, has efficiency up to 85% and 2.54mm pitch pins on 10x10mm PCB.

8.06 RON

Delay relay module, adjustable time, display, 6-30V

In Stoc

Adjustable delay relay module, ideal for automation and timed controls, has a digital display for quick setting and monitoring, is flexibly powered at 5V via MicroUSB or 6-30VDC at the terminals, offers selectable resolution up to tenths of a second and includes 4 operating modes for delay, pulse or ON OFF cycle, 5A relay for DC or AC loads.

17.91 RON

Out-of-Stock

N-Mosfet LR2905Z, 55V, 42A

Out-of-Stock

N-type power MOSFET for efficient switching in power supplies, motor drivers and DC converters, supports 55V and up to 42A, offers low Rds(on) resistance at Vgs 10V for low losses, 110W dissipation and stable operation up to 175C, in a compact 3-pin TO-252 package.

3.63 RON

BMS module, battery protection, 3S, lithium, 12V, 10A

In Stoc

BMS module for 3S 12V lithium packs, safely manages charging and discharging to extend battery life. Provides overcharge, overdischarge, overcurrent and short circuit protection, supports up to 10A discharge and has low internal resistance for minimal losses. Suitable for 10.8V, 11.1V and 12.6V configurations, compact 50x16x1 mm.

8.36 RON

KY-008 laser diode module

In Stoc

The laser diode module is ideal for Arduino projects and other development boards, useful for pointing, alignment and optical experiments. It operates on 5VDC power supply, emits a red beam at 650nm, has a simple interface for quick command and a compact format that is easy to integrate into prototypes.

3.15 RON

Driver module 12V to 220VAC, 300W, 50Hz, Flat Wave type

In Stoc

Flat Wave inverter driver module, 12VDC power supply, designed to drive a 12V-0-12V mid-tap transformer to obtain 220VAC at 50Hz. Supports transformers up to 300W, has compact dimensions of 80 x 65 mm and 35 mm radiator for efficient heat dissipation, ideal for off-grid applications and battery power supplies.

53.52 RON

Dual power MOSFET module, 15A, 400W

In Stoc

Dual MOSFET module for precise control of DC loads between 5 and 36V, ideal for PWM control of motors, LED strips, or electromagnets. Supports 15A continuous and peaks up to 30A, receives a 3.3-20V signal from Arduino or other controllers, switches up to 20kHz, and offers low losses through low RDS(on), with dissipation up to 400W with adequate cooling.

2.83 RON

Infrared emitter module KY-005

In Stoc

IR transmitter for remote control and infrared communication projects with Arduino or other development boards, operates at 5V for easy integration, has low consumption of approximately 90mW for energy efficiency, compact format 18.5 x 15 mm for quick assembly on prototypes, suitable for emitting IR signals to compatible receivers and equipment.

2.88 RON

5-12V ZVS induction heating module

In Stoc

ZVS induction heating module for DIY projects, testing and fast heating of small metal parts. It operates at 5-12V and can deliver up to 150W at 12V with a 10A source, has a blue LED for power indication and a coil recommended for direct soldering to PCB for stable electrical contact.

46.79 RON

Charging module 3.7V lithium battery, with 5V boost

In Stoc

Quickly transform a 3.7V Li-Ion battery into a practical power bank, charges via MicroUSB port and delivers a stable 5V output through a female USB, includes protection for charging and discharging between 3.0 and 4.2V, provides current up to 500mA for charging the phone or powering devices at 5V.

3.81 RON

TP5100 Lithium Battery Charging Module, 1S-2S

In Stoc

Charging module for 1S or 2S Li-ion batteries, compatible with 4.2V cells and 8.4V packs, quickly selectable via SET jumper. Provides fast charging with programmable current up to 2A, accepts wide 5-18VDC power supply and allows the connection of a bicolor LED to display the charging status. Includes integrated protections for safe operation in DIY projects and industrial applications.

6.74 RON

Lithium battery charging module, TP4056, 5v, 1A, with protection, MicroUSB

In Stoc

Compact module for charging 3.7V 1S Li-Ion battery, ideal for DIY projects and portable devices, offers stable charging at 1A from a 5V source via MicroUSB or pins, includes discharge, overcurrent and short circuit protection, has separate outputs for battery and consumer for easy integration.

2.98 RON

Battery charging module XH-M602, 220VAC, display, 0-99.9VDC

In Stoc

Module for automatically maintaining charged batteries, monitors voltage and controls via relay the charger start and stop between set thresholds. It has a display for quick START STOP display and adjustment, operates at 220VAC with integrated power supply, controls batteries in the range 0-99.9VDC, suitable for UPS, solar systems and industrial applications.

44.62 RON

XH-M603 12-24V battery charging module with display

In Stoc

Charge control module for 12-24V batteries, functions as a smart relay that automatically starts and stops charging between set thresholds, has a display for displaying voltage and simple adjustment using buttons, accepts DC 10-30V power supply and includes LM2596 regulator, ideal for maintaining car, motorcycle or solar panel batteries.

25.03 RON

Electronic components

Subcategories