LED strip 12V 120 smd 2835, 1m
In Stoc
Ideal for uniform linear lighting in technical and decorative projects, it operates at 12V DC and offers 6000K cold light with 120 SMD 2835 LEDs per meter. It has approximately 12 lm per LED, a compact width of 8 mm for easy installation, is quickly fixed with double-sided adhesive tape and is delivered cut to the ordered length, up to 5 m.
14.56 RON
LED 100W, cool white, 32V
In Stoc
Power LED for projectors and industrial lighting, offers intense cold white light, 9000 lm at 100W, power supply up to 32V with the possibility of adjusting the intensity through lower voltage. 120 degree angle for wide coverage, 6000-6500K, lifespan up to 50,000 hours. Gets very hot, requires a radiator with adequate cooling.
67.89 RON
LED 1W 3.3V, 100-120lm
In Stoc
1W white LED for compact lighting applications, offers 100-120 lm at 3.3V. Features glass lens for uniform light dispersion, metal back for efficient cooling, estimated lifespan up to 100,000 hours and continuous operation up to 50,000 hours.
1.92 RON
5mm UV LED 395-400nm
In Stoc
UV LED for fluorescence, detection and special effects applications, emits in the 395-400nm spectrum for precise illumination, compact 5mm format easy to integrate on PCB, operates at 3.2VDC with low consumption 20mA, light power up to 40mW, recommended in series with a 220ohm resistor.
1.51 RON
RGB LED 5mm 4-pin Common Anode, Opaque
In Stoc
5mm 4-pin RGB LED with common anode, ideal for Arduino projects and multicolor lighting effects on a single element. Opaque diffuser for uniform light, easy color control via PWM on RGB channels, operates at 2.1–3.4 VDC, the longest pin is the common plus.
1.51 RON
RGB LED 5mm 4-pin Common Cathode, Opaque
In Stoc
5mm RGB LED with 4 pins and common cathode, opaque glass for uniform color mixing, ideal for Arduino projects and prototypes where you need the entire RGB palette from a single element. Operates at 2.1-3.4VDC on each channel, common minus is on the longest pin, simple intensity control on each color with suitable resistors.
1.51 RON
Out-of-Stock
UV-C Germicidal LED, SMD 3535, 265-285nm, disinfectant
Out-of-Stock
Germicidal UV-C LED for UVGI projects, ideal in air, water and surface disinfection systems, emits at 265-280 nm for high efficiency, compact SMD 3535 format 3.5x3.5 mm, 3-6 V power supply at 40 mA, wide angle 120° with quartz glass lens for good transmittance.
26.62 RON
UV-C Germicidal LED, SMD 6868, 265-285nm, disinfectant
In Stoc
Germicidal UV-C LED for UVGI systems, designed to disinfect water, air and surfaces by acting on the DNA of microorganisms. Emit at 265-280nm for high efficiency, has a wide angle of 120°, quartz glass lens for UV transmission, InGaN chip and 99.99% gold wire connections for operational stability, SMD 6868 format of 6.8x6.8mm.
98.74 RON
LED warning light, red, 12V
In Stoc
Red LED strobe light for clear visual signaling of moving or working equipment, 12VDC power supply, flashing mode for increased visibility, compact body 73 x 43.5 mm without base. Quick to mount with included kit, screws and two bases, one with self-adhesive pad and one for screw fixing.
28.23 RON
5mw, 650nm, cross laser module with focus
In Stoc
Laser module with cross projection for precise alignment and positioning in industrial and DIY applications, emits at 650nm with 5mW power, has adjustable focus from the front regulator for clear lines at various distances, operates at 3-6VDC with low consumption, resistant cylindrical metal housing and compact 35x12mm format for easy integration.
68.75 RON
Infrared Receiver KY-022
In Stoc
Allows receiving commands from IR remote controls for Arduino projects and simple automation. Offers compatibility with most common 38 kHz remote controls, fast and stable signal response, easy interfacing via digital output, 3.3-5 V power supply and compact format for quick integration on breadboard or PCB.
4.84 RON
LED holder 5mm, plastic
In Stoc
Ensures quick and stable mounting of 5mm LEDs on panels or housings, providing a firm hold and a clean exterior appearance. Made of durable plastic, it has a base for secure attachment, reduces the risk of movement due to vibrations and is suitable for electronic projects, prototypes and industrial applications.
1.21 RON
Pair of IR LED emitting, receiving 5mm
In Stoc
IR emitter and receiver pair with 5mm LED, ideal for optical barriers, presence detection and contactless controls. Provides infrared emission and reception for automation systems and electronic projects, standard 5mm format easy to mount, fast response and simple integration on PCB boards, suitable for DIY or industrial applications.
1.69 RON
LED Cree XLamp, CXA1304, 36V, 3-7W, SMD, Cool White
In Stoc
COB LED for compact fixtures, provides cool white light with good flux and high efficiency, at 36V power supply through constant current driver. The uniform emitting surface of approximately 6 mm ensures easy integration and optical control, and the wide angle of approximately 115 degrees makes it suitable for downlight, retrofit and commercial lighting. Recommended power 3-7W, nominal current 200mA, maximum 400mA.
12.61 RON
Set of 375 LEDs, 3mm and 5mm, different colors
In Stoc
Kit with 375 3mm and 5mm LEDs, in white, blue, green, yellow and red colors, ideal for prototyping, repairs and electronic projects. The LEDs are sorted in a plastic organizer box with lid, for quick access and tidy storage, voltage varies depending on type, compatible with breadboard and PCB mounting.
41.25 RON
RGB LED, 10mm, common cathode
In Stoc
10mm RGB diode with frosted glass for uniform diffusion, ideal with Arduino and other boards for mixing colors through the 3 channels Red, Green, Blue. It has 4 pins and is with common cathode, the long pin connects to GND, and the others to the signal. It works at 2V on red and 3.2V on green and blue.
2.23 RON
5mm Piranha LED, White, 3V
In Stoc
5mm Piranha LED diode, cool white light, suitable for signal lighting and electronic projects where good intensity and stability are required. It operates at 2.8-3.4VDC , supports up to 40mA, has 4 pins for secure mounting on PCB and efficient heat dissipation, recommended with a series resistor for current limitation.
0.93 RON
Laser diode module, 650nm, 250mW, spot, 3-5VDC
In Stoc
Adjustable focus laser module for generating a precise point, ideal for alignment, positioning and optoelectronic projects. Emits at 650nm with 200-250mW power, operates at 3.2-5VDC with consumption below 300mA, has ESD, reverse polarity and short circuit protection, compact 12x45mm housing with cable under 30cm.
64.40 RON
LED traffic light module, 56mm, 3.3-5V
In Stoc
Ideal for simulating a traffic light in Arduino projects and other development boards, the module includes red, yellow and green LEDs with integrated resistors for direct connection to 3.3-5V. It quickly mounts on a breadboard, has digital inputs and a common cathode interface, and offers a compact 56mm form factor for easy prototyping and testing.
2.83 RON
Relay module with IR remote control, 12V, 1 channel
In Stoc
Quickly control the power supply of a consumer via IR remote control, ideal for simple automation at 12V. Offers 1 channel with ON OFF control at 38 kHz, actuation up to 8 m, standard NC NO COM outputs for easy integration and 10A relay for AC or DC loads. Compact, easy to mount in electronic and industrial projects.
29.84 RON
Relay module with IR remote control, 5V, 1 channel
In Stoc
Quickly control an electrical consumer via IR remote control, ideal for automation and DIY projects, operates at 5VDC and switches ON or OFF from up to 8 m, 10A relay with NO, NC and COM contacts for easy integration, NED decoding at 38 kHz for stable control.
36.28 RON
CHA-81 DIY kit, 9x9 LED matrix, graphic effects
In Stoc
DIY kit for assembling a 9x9 LED matrix with graphic effects, ideal for educational projects and interactive prototypes. Includes PCB and all electronic components, mounting and polarity markings are printed on the board for easy soldering. Operates at 5-9V and can be powered by USB or external battery for flexible use.
44.81 RON
Optical prism cube, 15mm, for experiments
In Stoc
15 mm optical cube prism X-Cube made of Bk7 K9 glass, ideal for experiments and demonstrations of refraction and dispersion of light. Offers high clarity and controlled beam deviations, including laser, for educational visual effects. Quality optical finish and compact shape, easy to handle and integrated into assemblies.
28.22 RON
LED 5mm, Red
In Stoc
The 5mm red LED diode is ideal for indicator lights, control panels and electronic projects. It operates at 2-2.2 VDC, provides clear and stable light, has a viewing angle of 15-30 degrees for good directionality, easily mounts on the board through standard pins, suitable for technical and industrial applications.
0.30 RON
LED 5mm, White
In Stoc
The 5mm white LED diode is ideal for indicator lights and electronic projects, providing clear and stable light at 3-3.4VDC. It has a viewing angle of 15-30 degrees for efficient light direction, is easy to mount on PCBs and is suitable for industrial, hobby and prototyping applications.
0.30 RON
LED 5mm, Yellow
In Stoc
The 5mm yellow LED diode is ideal for light indicators and electronic projects, it provides clear and visible light, operates at 2-2.2V DC, has a viewing angle of 15-30 degrees for good focus, is easily mounted on the board and ensures low consumption and long service life.
0.30 RON
5mm LED, Green
In Stoc
Ideal for light indicators and signaling in electronic assemblies, this 5mm green LED provides clear and stable light at 3 - 3.4VDC power supply, has a 15 - 30 degree viewing angle for good focus, is easily mounted on PCB and ensures low consumption and high reliability.
0.30 RON
LED 5mm, Blue
In Stoc
5mm blue LED for signaling and indicators on panels, equipment and DIY projects, operates at 3-3.4VDC, provides clear illumination with a concentrated beam due to the 15-30 degree viewing angle, has a standard format for easy mounting and stable color for good visibility.
0.30 RON
LED Lamp Holder, for 3D printed lamps, 5V USB
In Stoc
The LED base with 5V USB power supply is ideal for 3D printed lamps and for highlighting ornaments made of resin, glass or other translucent materials. It provides uniform white light, has a round wooden base for stability, low energy consumption and a 1 m cable with ON OFF switch for quick start and easy use.
17.57 RON
Flexible COB LED Filament, Green, 185mm, 3V
In Stoc
Flexible COB LED filament for decorative lighting and DIY projects, emits intense green light with uniform diffusion at 360 degrees. Slim and easy-to-shape design, low consumption and minimal heating for efficient use. Operates at 3V DC with metal ends for quick connection and easy assembly in lamps and creative installations.
9.97 RON
Flexible COB LED Filament, Blue, 185mm, 3V
In Stoc
Flexible blue COB LED filament, ideal for decorative lighting and DIY projects, offers intense light with uniform diffusion at 360 degrees, saturated color and transparent coating. Operates at 3V DC, has low consumption and low heat generation, is easily shaped for installation in narrow spaces, metal ends for quick connection.
9.97 RON
Flexible COB LED Filament, Red, 185mm, 3V
In Stoc
Flexible red COB LED filament for decorative lighting and DIY projects, offers intense light with uniform diffusion at 360 degrees, saturated colors without blue loss, low consumption and low heat generation. Powered by 3V DC, easily shaped thanks to the flexible construction and quickly connected via metal ends.
9.97 RON
COB LED tube, Rigid, 38mm, Red, 12V
In Stoc
Rigid lighting solution for decorative projects, illuminated signs and custom fixtures at 12V, emits uniform red light at 360 degrees for a homogeneous effect from any direction. The construction on a rigid support with silicone coating offers protection, pleasant diffusion and resistance to light shocks. Low consumption and minimal heat release, quick connection through metal ends.
2.88 RON
COB LED tube, Rigid, 38mm, White, 12V
In Stoc
Compact solution for decorative lighting and commercial applications at 12V, with rigid construction on a stable support and silicone coating for protection and uniform diffusion. Provides 360 degrees white light, low consumption with current below 45mA and emits very little heat, ideal for custom bulbs, shop windows and illuminated signs.
2.88 RON
COB LED tube, Rigid, 38mm, Blue, 12V
In Stoc
Compact solution for decorative lighting and signage, it offers uniform blue light at 360 degrees, with low consumption and minimal heat emissions. The rigid construction on a stable support and the silicone coating ensure protection, good diffusion and resistance to light shocks, it operates at 12V and connects easily through metal ends.
2.88 RON
Out-of-Stock
COB LED tube, Rigid, 38mm, Green, 12V
Out-of-Stock
Green 12V lighting solution for decorative projects, advertising and commercial applications, rigid construction for stable mounting, silicone coating for protection and uniform diffusion, 360-degree light for homogeneous lighting, low consumption and minimal heating for efficient and durable use.
2.88 RON
Flexible LED Lens Set, Transparent, Cosplay, White, 6V
In Stoc
Two flexible LED lenses for cosplay visors and DIY projects on masks or helmets, easily bends and cuts to follow the desired shape, reflective film with dots diffuses light evenly on the surface, semi-transparent illuminated visor effect, 6V power supply with 2 CR2032 batteries in series, button support and cables for quick assembly.
40.98 RON
Flexible LED Lens Set, Transparent, Cosplay, Yellow, 6V
In Stoc
Set of two flexible LED lenses for cosplay visors, ideal for DIY masks and helmets, foldable and easy-to-cut material for perfect fit, reflective film evenly distributes light for illuminated visor effect, semi-transparent for discreet visibility, 6V power supply with 2 CR2032 batteries in series, not included, cables and battery holder for quick assembly.
40.98 RON
Flexible LED Lens Set, Transparent, Cosplay, Red, 6V
In Stoc
Set of two flexible LED lenses for cosplay visors and DIY projects on masks or helmets, semi-transparent material, foldable and easy to cut, reflective film distributes light evenly for a lighted visor effect, 6V power supply with 2 CR2032 batteries in series, cables and support with button for quick assembly.
40.98 RON
New
Silicone tube. Diffuser for WS2815 LED strip, 180 degrees, IP65, 1 m
In Stoc
Flexible silicone diffuser tube for addressable LED strip, provides uniform light over 180 degrees and a clean look in decorative or architectural projects. The UV-resistant material maintains its transparency and flexibility over time, and the IP65 protection makes it suitable for indoor and outdoor use. Compatible with WS2811, WS2812, and WS2815, 1 m length, delivered without LED strip.
49.77 RON
Out-of-Stock
LED holder 5mm, Metal, with plastic separator
Out-of-Stock
Metal bracket for panel mounting of 5mm LEDs, provides firm thread fixation and professional appearance. Includes white plastic separator for contact isolation, compatible with 5mm LED, requires 8mm mounting hole, metal construction for strength and long use. Includes metal bracket and plastic insulator.
1.92 RON
RGB LED bar, 3D, sound control, music, VU meter, adjustable, USB 5V
In Stoc
Instantly create a dynamic atmosphere in the room, synchronizing 3D RGB lighting with music or ambient sounds via the built-in microphone. Quickly controlled from the app via Bluetooth, you can choose colors and effects, adjust brightness and reaction speed. 5V USB power supply for easy use with PC, powerbank or charger.
73.42 RON
New
WS2812B addressable LED strip, IP20, 10 cm
In Stoc
Compact solution for RGB lighting effects controlled in DIY and ambient projects, with 6 SMD5050 LEDs per 10 cm, each pixel individually addressable through the integrated WS2812B controller. It operates at 5V and is easily controlled through a single data pin with Arduino, ESP32, or Raspberry Pi. Cut spacing at each LED, IP20 for indoor use.
4.63 RON
LED Bar Module, Common Cathode, 8 LEDs, 3-5V
In Stoc
Ideal for visual display and quick testing of digital outputs on Arduino and similar boards, the 8-LED common cathode bar allows individual control of channels with LOW activation. It operates directly at 3-5V thanks to integrated resistors, has low power consumption and different color LEDs for easy signal identification in debugging, status indicators and DIY projects.
12.35 RON
Advertising Panel Module, RGB Display, 37x9cm, 16x64, Programmable from the app, 5V
In Stoc
Programmable RGB LED panel for attractive messages in shop windows or on vehicles, with 16x64 resolution on a 37x9 cm surface. It is easily powered at 5V via USB and quickly controlled via Bluetooth from the Android or iOS application. Allows texts, animations and scrolling or flash effects, including logos and images created pixel by pixel. Displays up to 8 characters simultaneously, with scrolling for complete messages.
298.35 RON
LED Matrix Module, 4x, MAX7219, Red
In Stoc
Red LED dot matrix display with 4 8x8 panels, controlled by MAX7219, ideal for messages, graphic effects and microcontroller projects. It connects easily with only 3 data lines, is compatible with Arduino and similar boards, operates at 5V and offers 256 LEDs for good visibility. Compact size 128 x 32 x 13 mm.
30.58 RON
Addressable ring module, RGB, WS2812, LED 5050, with driver
In Stoc
Addressable RGB LED ring with 61 WS2812B 5050 LEDs, ideal for dynamic lighting effects in Arduino projects and other development boards. It is easily controlled via a single data wire, allows cascading for quick expansion, operates at 5V and provides uniform illumination over an outer diameter of 90mm.
29.96 RON
Addressable LED matrix, 16x16, flexible, WS2812B, 5V
In Stoc
Ideal for animated displays and DIY microcontroller projects, this flexible 16x16 LED matrix offers individual control of each LED via WS2812B. It operates at 5V, renders intense RGB colors with dynamic effects, adapts easily to curved surfaces, and allows for quick connection for expansion into larger panels.
140.59 RON