2.4GHz 2.5dBi antenna 110mm with cable, SMA male

2.4GHz antenna, 2.5 dBi, 110mm, plus cable

In Stoc

Omnidirectional antenna for 2.4GHz, ideal for improving reception and coverage of WiFi, IoT or industrial equipment. Offers 2.5dBi gain, vertical polarization and 50 Ohm impedance, supporting up to 50W. Includes connection cable with MHF connector, with SMA Male on the antenna and SMA Female on the extension, stable operation between -40 and 70 C.

9.08 RON

433MHz helical antenna

In Stoc

Ideal for improving reception and transmission at 433MHz in compact RF applications, it offers 2.2 dBi gain for more stable signal, 50 ohm impedance for easy matching with common modules, supports up to 30 dBm, 5 mm diameter for easy integration into small equipment and housings.

3.03 RON

50mm GPRS Antenna SMA Male with IPEX Extension

GPRS antenna 50mm, SMA male, with IPEX extension

In Stoc

Compact 50 mm antenna for SIM800L modules and GSM GPRS applications, optimized for the 900 1800 MHz bands, offers stable transmission and 2 dBi gain, has 50 Ohm impedance and vertical polarization, SMA male connector and adapter cable with SMA female to IPEX U.FL for quick connection to modules and equipment.

8.25 RON

Atomizer 20mm Ultrasonic Mist

In Stoc

Piezoelectric element for generating ultrasonic mist from water, ideal for aroma diffusers, humidifiers and DIY projects. It operates at 2.4MHz, offers atomization up to 380 ml/h, has an outer diameter of 20 mm with a gasket and a disc of 16 mm, impedance below 2 ohms for good efficiency. Requires a driver with the right frequency.

7.73 RON

Kapton tape 25m, 10mm

In Stoc

Kapton tape 10mm x 25m is ideal for masking and electrical insulation in high temperature applications, made of polyimide film with silicone adhesive. It withstands up to 260 C continuous and 300 C short term, has excellent heat and solvent resistance, minimal shrinkage after baking and removes cleanly, suitable for PCB, etching, automotive and 3D printers.

12.10 RON

Kapton Tape 12mm x 25m, heat-resistant polyimide

Kapton Tape 20mm x 25m, heat-resistant polyimide

Ultra slim speaker 40mm 8 ohms 0.5W

In Stoc

Compact solution for DIY audio projects and integration into portable equipment, it offers clear sound for its size, has an ultra-slim 40 mm profile for mounting in tight spaces, 8 ohm impedance for wide compatibility with amplifiers, 0.5 W power for low consumption and stable use, ideal for toys, alarms and small electronic devices.

2.80 RON

ESD antistatic wristband with pliers

In Stoc

It eliminates static electricity from the body and protects PCB boards during assembly or service, works by grounding, has clamps for quick attachment to the ground point, adjustable band for wearing comfort, flexible cable for freedom of movement and stable contact.

9.05 RON

Breadboard 760 points

In Stoc

The 760-point prototyping board is ideal for quick assembly of temporary circuits and solderless testing. It has a standard 2.54 mm pitch, Dupont wire compatibility, 4 corner holes for secure attachment, and a self-adhesive base for stable mounting on various surfaces.

10.59 RON

Automatic pliers for stripping and cutting wires

Out-of-Stock

Automatic wire stripping and cutting pliers

Out-of-Stock

Automatic wire stripping and cutting pliers, ideal for fast and precise work in electrical and electronic installations. It automatically adapts to the cable thickness, offers adjustment for the stripping length, allows adjustment of the pressure on the conductor to protect the core, and includes an integrated cutting function for increased efficiency.

32.00 RON

Breadboard 830 points MB-102 with metal plate

Breadboard 830 points with metal plate

In Stoc

Prototyping board for rapid testing of solderless circuits, with 830 points and MB-102 breadboard mounted on a metal plate for stability, includes 3 power jacks and quick connections, firmly attaches to the table with 4 rubber feet, ideal for development, debugging and demonstrations in electronics.

45.44 RON

Breadboard 830 points MB-102

In Stoc

The MB-102 830-point breadboard is ideal for rapid prototyping, allowing for solderless mounting of modules, sensors and LEDs and immediate circuit modification. It offers 830 connection points for complex assemblies, has side power lines for easy organization, stable contacts for repeated insertions and is compatible with jumper wires and common components.

11.30 RON

Mini Breadboard, 25 points

In Stoc

Ideal for rapid prototyping and circuit testing in tight spaces, the 25-point mini breadboard offers stable solderless connections. It has a plastic housing with metal contacts, standard 2.54 mm pitch between holes compatible with common pins and modules, very compact format easy to integrate into electronic projects and kits.

2.13 RON

Capacitive button TTP223, touch

In Stoc

Capacitive touch switch for opening/closing commands on electronic projects, with very low consumption and 2.5-5.5VDC. The output can be set to High or Low, and the operation can be non-latching or latching by shorting pads A and B. Compact format 11.5 x 8 mm, easy to integrate into housings and panels.

3.03 RON

Active buzzer 5v

In Stoc

Active buzzer for fast acoustic signaling in electronic projects, emits sound immediately upon application of DC voltage, operates at 5VDC, does not require a PWM signal or complex driver, easily integrates into assemblies with microcontrollers and 5V sources, ideal for alarms, confirmations and sound notifications.

3.82 RON

Active piezoelectric buzzer 3-24V HND-2312

In Stoc

Active piezoelectric buzzer for sound signaling in electronic and automation projects, operates directly at 3-24V without an external circuit, offers clear and stable sound, low consumption for power supply from batteries or industrial sources, compact format easy to integrate on panels and housings, ideal for alarms, status confirmations and simple warnings.

8.47 RON

Acrylic Case DSO138

In Stoc

The acrylic case for the DSO138 oscilloscope protects the board and components during use and transport, has a transparent design for quick visibility of the display and connections, is lightweight and rigid for stable mounting, provides easy access to buttons and ports, is simple to assemble and keeps the equipment clean and tidy.

35.66 RON

Acrylic Case LCR-T4 Tester

In Stoc

It effectively protects the LCR-T4 M328 tester during use and transport, the transparent acrylic case provides quick access to the display and buttons, keeps the board stable and reduces the risk of accidental touches, is lightweight and durable, mounts quickly and gives the equipment a neat appearance.

12.90 RON

Transparent plastic case for Arduino UNO

Arduino UNO transparent plastic case

In Stoc

Protects the UNO board from dust and accidental touches, while maintaining quick access to connections. The transparent plastic housing, injection-molded, consists of two parts that easily fit together, compatible with Arduino UNO and most clones. It has precise cutouts for pins and the Reset button, providing good visibility of the board and clean assembly.

5.87 RON

Raspberry Pi Zero case

In Stoc

Protects and organizes Raspberry Pi Zero in compact projects, offering interchangeable top parts for quick access to connectors and ventilation, includes camera mounting adapter, ensures stable fixation of the board and cables, lightweight and durable construction for daily use in technical and hobby applications.

15.00 RON

Photoresistor (5537) 5mm

In Stoc

5mm 5537 type photoresistor for detecting light intensity in electronic and automation projects, supports up to 150VDC and 150mW, has peak sensitivity at 540nm, resistance 18-50 Kohm at 10 lux and 2 Mohm in the dark, with fast response time 20ms on rise and 30ms on fall.

1.69 RON

Water Pump Hose 6x8mm, 1 meter

In Stoc

Flexible silicone hose for water supply to DC 3-6V submersible pumps, ideal for electronic projects, aquariums and recirculation systems. It has an inner diameter of 6mm and an outer diameter of 8mm for a firm connection, remains elastic and easy to mount on the connections, is sold by the linear meter and is cut to the ordered length.

6.36 RON

CAN Module, MCP2515, CAN V2.0B, 5V

In Stoc

Ideal for reading and monitoring the CAN network of the car with Arduino or other development boards, this CAN module with MCP2515 supports the CAN V2.0B standard and communication up to 1Mb/s. It operates on 5VDC power supply, has a compact 44 x 28 mm format for easy integration into projects, includes library support and example code from GitHub for quick implementation.

12.35 RON

2x100W TDA7498 amplifier module

In Stoc

Dual BTL class D amplifier for home theater and active speakers, delivers up to 2x100W with high efficiency and low heat. Operates at 15-34VDC, recommended 24V, has 4 selectable gain stages, short-circuit and overtemperature protections, plus Normal, Stand-by and Mute modes for easy operation control.

72.95 RON

LED warning light, red, 12V

In Stoc

Red LED strobe light for clear visual signaling of moving or working equipment, 12VDC power supply, flashing mode for increased visibility, compact body 73 x 43.5 mm without base. Quick to mount with included kit, screws and two bases, one with self-adhesive pad and one for screw fixing.

28.23 RON

8x8 LED matrix, MAX7219, Red, SMD

In Stoc

8x8 LED matrix with red LEDs, ideal for simple displays, texts, symbols and animations in projects with Arduino or other boards. Includes MAX7219 driver for easy control via SPI interface at 5V, offers 64 LEDs with 3mm pixel in a compact 32x32mm format. Depending on the batch, it may come with the display glued or not and with variable connection accessories.

7.95 RON

Electret microphone capsule

In Stoc

The 2-terminal electret microphone capsule, ideal for Arduino projects and other development boards, converts sound into an electrical signal for audio detection, simple recording or voice commands. It has compact dimensions for easy integration, low power consumption, good sensitivity for general applications and quick connection by soldering or on a breadboard.

1.21 RON

VL53L0X V2 Module ToF distance sensor 2m

VL53L0X V2 module, flight time, laser distance

In Stoc

The ToF module with VL53L0X V2 sensor enables fast and accurate laser distance measurement up to 2 m using the time of flight of light. Includes filters for stable performance in varying ambient light and on different surfaces. Easily integrates with Arduino and other boards via I2C, operates at 2.6-3.5 V and offers Reset and Interrupt pins for advanced control.

12.68 RON

MPU-6500 6-axis accelerometer gyroscope module I2C

Accelerometer Gyroscope I2C MPU-6500 6 axis module

In Stoc

6-axis module with MPU-6500 for precise motion measurement, ideal for robots, drones or stabilization. Integrates gyroscope and 3-axis accelerometer, communicates via I2C or SPI with Arduino and other boards, has 16 bit AD converter for detailed data, operates at 3-5V with internal regulator, compact format 15x25 mm with 2.54 mm pins.

12.00 RON

ESP-01 adapter module compatible with ESP8266

ESP-01, ESP8266 adapter module

In Stoc

The adapter for ESP-01, ESP8266 simplifies prototyping and rapid integration into IoT projects, provides a stable interface for programming and testing, has easily accessible pins for connection to a breadboard, includes support for 3.3V power supply and UART serial signals, is compact and robust for use in the laboratory or production.

4.60 RON

Adapter module for ESP-01, ESP8266, 5V/3.3V

In Stoc

Allows quick connection of an ESP-01 ESP8266 to Arduino and other 5V logic boards, providing stable power supply through integrated 3.3V regulator and logic level conversion on the board. Operates at 4.5–5.5V DC input, supports current up to 240mA, ensures increased compatibility in IoT projects and prototyping through simple module assembly.

10.14 RON

USB 2.0 female adapter module, 2.54mm pins

USB 2.0 adapter module, Female

In Stoc

Allows quick connection of a USB cable to an electronic circuit, via a USB 2.0 female connector mounted on the module. The wiring is brought out on 4 pins with standard 2.54 mm pitch, easy to integrate on breadboard or PCB. Provides direct access to VBUS 5V, D+, D- and GND lines, ideal for prototyping and USB interfacing.

2.66 RON

USB 2.0 adapter module, Tata

In Stoc

USB 2.0 adapter with male connector for quick integration of a USB cable into electronic projects, converts USB signals into 4 pins with standard 2.54 mm pitch for easy connection to the board or breadboard, provides clear access to VBUS 5V, D+, D- and GND, suitable for prototyping, testing and interfacing with modules.

2.66 RON

USB 3.0 adapter module, Female

In Stoc

Allows quick connection of a USB 3.0 cable to an electronic circuit, ideal for prototyping and integration in industrial or electronic projects. USB 3.0 female connector on the module, the wiring is brought out on pins at a standard 2.54 mm pitch for compatibility with breadboards and perforated boards, it has 9 pins for clear connections and easy assembly.

4.04 RON

LM386 mono audio amplifier module 5-12VDC

LCD 2004 20x4 blue 3.3-5V Arduino compatible

PAM8403 3W 2CH audio amplifier module with potentiometer

PAM8403 audio amplifier module, with potentiometer, 3W, 2CH

In Stoc

Compact stereo audio amplifier for DIY projects, ideal for small speakers and portable systems, offers clear sound and easy-to-adjust volume via the integrated potentiometer, operates on 5V DC power supply, delivers up to 3W per channel, compatible with 4-8 Ohm speakers for quick integration into electronic assemblies.

9.08 RON

MP3 amplifier module

In Stoc

MP3 module with integrated 2W mono amplifier, ideal for Arduino projects and compact audio applications. Plays directly from MicroSD card, powered by 5V or 3.7V battery with MicroUSB charging, offers audio output on gold-plated 3.5 mm jack or connectors, has buttons for play, volume and song change.

10.89 RON

MH-M18 Bluetooth 4.2 BLE stereo audio module

Bluetooth 4.2 Module JDY-18

In Stoc

High-speed Bluetooth module for fast integration of wireless connectivity into electronic projects, ideal for stable communication between microcontrollers and mobile devices. Supports Bluetooth 4.2 for low power consumption and extended compatibility, operates at 1.8-3V supply voltage, has compact dimensions and fast response to data transmission.

24.20 RON

Bluetooth module BT 06

In Stoc

BT06 Bluetooth module for Arduino and other boards, quickly creates a wireless SPP serial connection for short-distance data exchange between PC, phone or equipment. Easily integrates via UART, has sensitive transceiver for stable links, low power and cost, plus integrated PCB antenna. Power supply 3.6-6V, logic 3.3V.

22.09 RON

HC-05 Bluetooth Module Arduino Compatible

Bluetooth module HC-05, compatible

In Stoc

Bluetooth module for wireless serial communication between Arduino or other boards and phone or PC, works as Master or Slave, fast connection via UART TTL with default setting 9600 bps, supports Data Mode and AT Command Mode for configurations such as name, password and baud rate, 3.6-6V power supply and low consumption, ideal for automation and remote control projects.

27.04 RON

HC-06 Bluetooth module

In Stoc

Bluetooth module for RS232 serial communication, compatible with Arduino and other development boards, ideal for transmitting and receiving wireless data and remote control from your phone. It works in Slave mode, has 3.3-6VDC power supply with 3.3V logic, coverage up to 10 m and Bluetooth 2.0 + EDR, with default baudrate 9600.

30.41 RON

5V active buzzer module Arduino compatible

Buzzer mode active

In Stoc

Ideal for alarms, sound notifications and DIY projects, this active buzzer provides continuous sound when powered, easily integrates with Arduino and other development boards, operates at 5V, can be controlled directly from a digital pin, LOW level activation for simple and fast control.

3.63 RON

Passive buzzer module 3.3-5V Arduino compatible

Out-of-Stock

Passive Buzzer Mode

Out-of-Stock

Passive buzzer ideal for sound signaling controlled by microcontrollers, works with a 2k-5k rectangular signal and allows the playback of various tones or melodies through the Arduino tone function, is powered by 3.3-5VDC and has compact dimensions of 33 x 13 mm for easy integration into electronic projects.

5.03 RON

OV2640 2.0MP camera module

In Stoc

The compact camera module for embedded and IoT projects, offers 2.0MP images up to 1600x1200, operates at 3.3V and delivers JPEG directly for fast processing and low resource consumption. It supports exposure, white balance, saturation and contrast adjustments, and the output can be set to JPEG or RGB565 for flexible integration.

69.71 RON

Mechatronics and IoT

Subcategories