Programming

Programming

Subcategories

IC Programming Adapters
IC Programming Adapters
MAX3232 mini RS232 to TTL MCU converter module
MAX3232 mini RS232 to TTL MCU converter module
In Stoc
The RS232 to TTL converter enables communication between the RS232 port of a PC or laptop and the TTL UART of microcontroller projects, offering stable bidirectional conversion based on the MAX3232 chip. It operates at 3.0V–5.5V, supports transfer rates up to 120 kbps, has low power consumption and is suitable for prototyping, robotics and educational applications.
2.96 RON
Programmer, Serial converter, USB 2.0 to TTL UART, CP2104 STC
Programmer, Serial converter, USB 2.0 to TTL UART, CP2104 STC PRGMR
In Stoc
USB 2.0 to TTL UART module with CP2104 for fast programming and debugging of STC boards and microcontrollers, offers stable transfer up to 12 Mbps, direct connection via USB type A and 6-pin TTL header 3.3V, RST, TXD, RXD, GND, 5V. It is compatible with CP2102 drivers and includes 4 female-female Dupont wires for easy connection.
23.41 RON
USB to TTL module, PL2303HX compatible
USB to TTL module, PL2303HX compatible
In Stoc
USB to TTL adapter for quick programming of Arduino Pro Mini boards, offers 3.3V or 5V selection for compatibility with various modules, is powered directly from USB at 5V and includes a 500mA regenerative fuse for protection, uses a PL2303HX compatible controller, works on Linux and Windows with older drivers available at Download, the connection is RX to TX and TX to RX.
7.93 RON
AVR USBASP USBISP Atmega 10-pin programmer, Arduino compatible
AVR USBASP USBISP Atmega 10-pin programmer, Arduino compatible
In Stoc
ISP programmer for Atmel AVR microcontrollers, allows direct flash on the board without disassembly, 5V USB power supply and selectable 3.3V or 5V logic via jumper, based on ATMega8 at 12 MHz for fast programming, compatible with AVRDUDE and other utilities on Windows, Linux and Mac, includes 10-pin ribbon cable and overvoltage protection.
16.73 RON
ST-Link V2 compatible programmer for STM32 and STM8
ST-Link V2 STM8 STM32 Compatible Programmer
In Stoc
Compact programmer and debugger for development and service on STM32 and STM8 boards, based on ST-LINK V2 compatible. Supports SWD and SWIM for fast programming and debugging, has clear laser markings for pins and 2.54 mm connector for secure connection. Offers 5V and 3.3V outputs, includes 500 mA resettable fuse and status LED, in the package you get 4 DuPont wires.
26.23 RON
UART USB Programmer, ESP-01, ESP-8266
UART USB Programmer, ESP-01, ESP-8266
In Stoc
USB-UART programmer for ESP-01, ESP8266 modules, ideal for fast firmware upload and testing. It has an 8-pin connector with a pitch of 2.54 mm, easy access to GPIO0 for entering programming mode, communicates stably via CH340G and provides power from USB 5V with conversion to 3.3V on the board. Compact size, easy to integrate on the workbench.
9.10 RON
USB to TTL UART FT232RL programmer
USB to TTL UART FT232RL programmer
In Stoc
USB to TTL UART adapter with FT232RL, ideal for fast programming of Pro Mini boards and stable serial communication with microcontrollers. Includes jumper for selecting 3.3V or 5V logic level, plug and play connection via USB, standard pins for TX RX VCC GND, compact construction suitable for test and development bench.
12.72 RON
USB to TTL CH340G programmer module, 3.3/5V
USB to TTL CH340G programmer module, 3.3/5V
In Stoc
USB to TTL converter with CH340G, ideal for programming Arduino Pro Mini 3.3V or 5V boards. Offers selectable logic voltage 3.3V or 5V via jumper, stable TXD RXD GND connections and simple power supply from USB 5V. Reset is done manually, compact format for quick integration on the workbench.
7.44 RON
Serial to USB adapter for NRF24L01, CH340
Serial to USB adapter for NRF24L01, CH340
In Stoc
The adapter allows wireless serial communication together with an NRF24L01 module, ideal for stable links over long distances. It integrates the CH340T USB interface and works on most Windows systems, supports AT commands for quick configuration and includes a red LED for power and a blue LED for status, operating at 125.
28.81 RON
USB to TTL converter module, CH340E, MSOP10, MicroUSB
USB to TTL converter module, CH340E, MSOP10, MicroUSB
In Stoc
USB to TTL converter for programming and serial communication with development boards and modules, based on CH340E in MSOP10 package, 3.3-5V power supply with integrated 3.3V regulator, simple connection via MicroUSB, compact 16x16 mm format suitable for projects where space matters. For compatibility, use the driver in the Download section.
18.95 RON
Memory programmer, USB, CH341A
Memory programmer, USB, CH341A
In Stoc
USB programmer for writing and reading 24 EEPROM and 25 SPI memories in 8 and 16 pin packages, ideal for service, development and debugging of electronic boards. Automatically recognizes 25 series chips and supports download for the STC series, includes USB to TTL interface for online programming and SPI pins for expansion, operates at 3.3V or 5V for wide compatibility.
25.69 RON
PIC programmer, K150, ICSP
PIC programmer, K150, ICSP
In Stoc
Programmer for PIC chips with read, write and encryption functions, ideal for development and production, high-speed USB connection for fast programming, 40-pin DIP socket for direct programming between 8 and 40 pins plus ICSP included, USB power supply without external power supply, compatible with PICSTARTPLUS and Windows 98, 2000, NT, XP, 7.
72.41 RON
USB to RS232 converter, serial, CH340, 9 pins
USB to RS232 converter, serial, CH340, 9 pins
Last items in stock
Quickly connect RS232 devices to your PC or laptop via USB, using the CH340 chipset for stable communication. Provides RS232 DB9 male port with hand-held screw clamp, 5V direct power from USB and support for remote wake-up and power management. Works with most Windows versions by installing the CH340 driver. Compact size for easy integration.
11.97 RON
PIC Programmer, Pickit 3.5+, USB, Debugger
PIC Programmer, Pickit 3.5+, USB, Debugger
In Stoc
USB debugger and programmer for PIC and dsPIC Flash microcontrollers, ideal for in-circuit development and debugging directly from MPLAB IDE. Offers real-time execution, integrated overvoltage and short-circuit monitoring, upgradable firmware, and diagnostic LEDs for quick status. Includes ICSP cable and supports Programmer-to-Go programming for field work.
224.06 RON
Programmer TL866CS Mini Pro, V6.0, T48, universal, set of 6
Programmer TL866CS Mini Pro, V6.0, T48, universal, set of 6 accessories
Last items in stock
Universal programmer for reading, writing, erasing and quickly verifying BIOSes, microcontrollers and memories, USB 2.0 connection with direct power from the PC, compatible with Windows 32 64 bits, supports firmware updates for new ICs, includes 6 accessories with adapters, IC extractor and USB cable.
639.26 RON
IC Socket, TQFP32 to DIP32, SA636
IC Socket, TQFP32 to DIP32, SA636
In Stoc
Adapter socket for programming and testing TQFP32 or QFP32 ICs via DIP32 interface, ideal for quick conversion from SMD to easy-to-use format on programmers and breadboards. It has 32 pins in 8x4 arrangement with 2 rows of 16 pins output, cap fastening for secure contact, compatible with chips such as Mega328p, model SA636.
121.59 RON
USB to TTL UART module, serial converter, 6 pin, CP2102, 3.3-5V
USB to TTL UART module, serial converter, 6 pin, CP2102, 3.3-5V
In Stoc
USB to TTL UART converter for fast PC connection to TTL logic modules and boards, based on CP2102 for stable communication, operates at 3.3V or 5V, has 6 pins for easy connections including DTR for reset and direct programming, supports speeds up to 1 Mbps and is compatible with Windows, MacOS and Linux.
16.41 RON
PIC programmer adapter, PICkit3, 40 pins
PIC programmer adapter, PICkit3, 40 pins
In Stoc
Programming adapter for PIC microcontrollers, ideal for rapid development and testing, allows safe connection of DIP circuits with up to 40 pins, compatible with ICD2, PICkit 2 and PICkit 3, support for PIC16 and PIC18 families in 8 to 40 pin variants, compact 80.4 x 30.8 mm format for easy integration on the workbench.
13.83 RON
USB to TTL converter module, CH340, MSOP10, Type-C, 3.3-5V
USB to TTL converter module, CH340, MSOP10, Type-C, 3.3-5V
In Stoc
USB Type-C to TTL converter with CH340E, ideal for programming and debugging microcontrollers and boards such as Arduino Pro Mini through stable serial communication. It offers selectable 3.3V or 5V power supply, has LEDs for Power, TX and RX for quick verification, is compact and easy to integrate into projects, compatible with most Windows versions.
7.94 RON
Debug mode, USB to I2C, CP2112
Debug mode, USB to I2C, CP2112
In Stoc
USB to I2C module with CP2112 for debugging and quickly connecting SMBus/I2C devices to a PC, ideal for testing and applications such as DJI battery diagnostics. It offers full speed USB 2.0, easy GUI configuration without complex firmware or drivers, 8 configurable GPIO pins, and direct USB power with internal regulator for stable operation on Windows, Mac, and Linux.
43.83 RON
Set of 40 SMD to DIP adapters, 8 types
Set of 40 SMD to DIP adapters, 8 types
In Stoc
Set of 40 SMD to DIP adapter boards, 8 types, 5 pieces of each, for rapid prototyping and integration of SMD circuits on DIP pin boards. Compatible with SOP8, SOP10, SOP14, SOP16, SOP24, SOP28 and TQFP32 to TQFP100, offers precise alignment and easy soldering, comes with a transparent box for organization and storage.
62.57 RON
SMD to DIP adapter, 8 pins, SOP8
SMD to DIP adapter, 8 pins, SOP8
In Stoc
Adapter board for converting SMD SOP8 integrated circuits to DIP format, ideal for prototyping and testing on breadboard or PCB. Routes the 8 pins to standard 2.54 mm pitch, has DIP-compatible hole spacing, compact dimensions 10 x 10 mm, allows easy soldering and stable connections.
0.99 RON