Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
ST-Link V2 STM8 STM32 Compatible Programmer
Compact programmer and debugger for development and service on STM32 and STM8 boards, based on ST-LINK V2 compatible. Supports SWD and SWIM for fast programming and debugging, has clear laser markings for pins and 2.54 mm connector for secure connection. Offers 5V and 3.3V outputs, includes 500 mA resettable fuse and status LED, in the package you get 4 DuPont wires.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The ST-LINK V2 compatible module is a compact programmer and debugger for ST microcontrollers, ideal for development and service on STM32 and STM8 boards.
The case has clear laser-etched pin definitions, so connection is quick without having to look in the manual. It provides 5V and 3.3V power simultaneously for compatibility with various target boards, and safety is enhanced by a 500mA resettable fuse that protects the PC's USB port.
The status LED helps you easily check the operation, and the 2.54 mm connector ensures stable contact. The package includes 4 DuPont wires to easily adapt to different pin orders. The product may come in mixed case colors and with small aesthetic printing imperfections, without impacting the operation.
Specifications:
Power supply: 5VDC via USB 2.0
Output power: 5V and 3.3V
Type: Programmer and debugger ST-LINK V2
Supported interfaces: SWD for STM32
Supported interfaces: SWIM for STM8
Protection: 500 mA resettable fuse
Indicator: LED status
Connector: Pitch 2.54 mm
Cables included: 4 x DuPont wires
Factory firmware: V2.J17.S4
Software compatibility: ST-LINK Utility 2.0+, STVD 4.2.1 , STVP 3.2.3 , IAR EWARM V6.20+, IAR EWSTM8 V1.30+, KEIL RVMDK V4.21+
Use:
Connect ST-LINK V2 to PC via USB and install the driver. The programmer works with an older driver version, new versions are not supported. Download the utility that installs the driver from the link: Download
Check in Device Manager that it appears under Universal Serial Bus Controller.
Connect the DuPont wires between the ST-LINK and the target board, following the markings on the housing.
For STM32 it uses the SWD interface, simple 4-wire connection including power if necessary.
For STM8 use the SWIM interface, then open the IAR, KEIL, STVD compatible development environment.
If you are using 5V or 3.3V power from the adapter, confirm that the target board accepts the correct voltage and polarity.
Monitor the LED to see operating status during programming or troubleshooting.
For long-term support, use the firmware upgrade feature in the ST utility when available.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (4) - Review moderation
Comanda a fost procesată foarte repede . Rămâne să probez produsul . Mulțumesc pentru atenția acordată .
Programatorul e ok, a mers din prima incercare si nici nu aveam experienta, primul stm32f1038t6 programat. Din pacate e incomod sa lucrezi cu stm32f1038t6. Scoate jumperul pentru programare, baga programatorul, scoate programatorul, muta jumperul in pozitia run, baga cablu microusb. Nu o sa mai folosesc stm32f1038t6, voi cauta alte placi de dezvoltare. :)
Conform descrierii
Prea ok, calitate ok.
