Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
PIC Programmer, Pickit 3.5+, USB, Debugger
USB debugger and programmer for PIC and dsPIC Flash microcontrollers, ideal for in-circuit development and debugging directly from MPLAB IDE. Offers real-time execution, integrated overvoltage and short-circuit monitoring, upgradable firmware, and diagnostic LEDs for quick status. Includes ICSP cable and supports Programmer-to-Go programming for field work.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
PICkit 3.5+ is a Microchip Compatible Circuit Debugger/Programmer. Uses in-circuit debugging logic built into every Flash memory chip to provide a low-cost hardware debugger and programmer.
PICkit3.5+ enables debugging and programming of PIC and dsPIC Flash microcontrollers using the powerful MPLAB IDE.
This is an upgrade from the Pickit 3 programmer with "to go" programming.
Functions:
USB (interface with a maximum speed of 12 Mbit/s for the host computer)
Real-time execution
Compatible with MPLAB IDE (free download from Microchip)
Built-in overvoltage/short circuit monitor
Firmware upgradeable from PC/web download
Totally closed
Diagnostic LEDs (power, busy, error)
Read/write program and data memory of the microcontroller
Erasing the program memory space with verification
Peripheral ice creams at the break point
Program up to 512K bits of flash with Programmer-to-Go
ICSP cable included
Specifications:
Type: Debugger/Programmer
Tool/board application: debugging/programming
Supported MCU families: Flash-based PIC MCUs
Basic architecture: PIC, dsPIC
IC product type: In-circuit debugger
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
