Out-of-Stock

Display 3.5" Ultra HD 320x480 ILI9486/ILI9488

Out-of-Stock

3.5 inch TFT color screen for clear graphical interfaces in STM32 projects, with 320x480 resolution and 65K colors display on the 16-bit RGB parallel bus. It operates at 3.3-5V thanks to the integrated regulator, includes SD card support, is compatible with ALIENTEK STM32 Mini, Elite, WarShip, Explorer and Apollo boards, 34-pin connection.

127.13 RON

Display Color 1.8 inch, TFT LCD

In Stoc

1.8 inch TFT LCD color display for Arduino and other boards, ideal for displaying sensor data and simple graphical interfaces. Offers 128x160 resolution for clear images, vibrant colors and 120° viewing angle, fast communication via SPI interface and ST7735S control, with adjustable backlight via dedicated pin.

40.62 RON

3.5 inch HDMI Display, Touchscreen, for Raspberry Pi 4

In Stoc

Compact 3.5 inch screen with HDMI connection, ideal for interfacing and monitoring on Raspberry Pi 4, touchscreen support via pin header and installed driver. Also works with PC, consoles or DVR via HDMI, with clear display at 480x320 and software configuration up to 1920x1080 at 60Hz. Includes HDMI adapter for mounting directly over Pi 4.

211.47 RON

LED digital display 0.56" 1 digit 7 segments

In Stoc

0.56 inch 1 digit 7 segment LED display, common cathode, ideal for quickly indicating values in Arduino and other development board projects. It operates at 5VDC and offers good visibility in red, has 10 pins for easy connection and supports current per segment up to 40mA with series resistor.

2.42 RON

LED digital display 0.56" 2 digits, 7 segments, Red

In Stoc

2-character, 7-segment LED display, ideal for clearly displaying numerical values in electronic projects and control panels. It operates on common cathode, has highly visible red light, 0.56 inch characters for easy reading and 10 pins for quick connection, compatible with development boards such as Arduino.

3.03 RON

LED digital display 0.56" 3 digits, 7 segments, Red

Digital LED display 0.56" 3 digits, 7 segments, Red

In Stoc

3-character, 7-segment LED display, ideal for clearly indicating values in electronic projects, control panels or instrumentation. It has a common cathode for easy integration, is compatible with development boards such as Arduino, offers large 0.56 inch digits for good visibility, with intense red light, 12-pin connection.

3.63 RON

LED digital display 0.56" 4 digits, 7 segments, Red

In Stoc

4-character red LED display, ideal for clearly displaying values in electronic projects, meters and control panels. It has 4 digits with 7 segments for good readability, common cathode, 10 pins for easy connection and is compatible with development boards such as Arduino. The 0.56 inch character size provides good visibility from a distance.

3.36 RON

Display LCD TFT 2.8", Touchscreen, STM32

LCD TFT Display 2.8, Touchscreen, SD Card, 34P, STM32, 3.3-5V

In Stoc

2.8 inch 240x320 color TFT screen with resistive touchscreen, ideal for graphical interfaces on STM32 ALIENTEK projects. ILI9341 controller, SPI communication with only 4 IO pins, offers 65K colors and white LED lighting. Includes microSD slot on the back for files and images, operates at 3.3V or 5V and has a 34-pin connector.

103.32 RON

OLED Display 0.96" I2C IIC Blue

In Stoc

Compact 0.96 inch blue OLED screen, ideal for display in Arduino projects and other development boards, connects quickly via I2C with only two data pins, offers 128x64 resolution and visual angle over 160 degrees, has very low consumption and operates at 3V-5V, without backlighting thanks to self-illuminated pixels, with SSD1306 controller.

18.97 RON

LCD 0802 8x2

In Stoc

The 0802 8x2 LCD display is ideal for Arduino projects and other development boards, providing a simple solution for displaying messages and measured values. It has 2 rows of 8 characters, blue backlighting for good visibility, and is compatible with the I2C module for reduced wiring and quick integration. Dimensions 58 x 32 x 10 mm.

18.13 RON

LCD 12864, Blue, ST7920

In Stoc

128x64 graphic display with blue backlight and white text, ideal for Arduino projects, 3D printers and other applications where you need text and custom graphics. It uses the ST7920 controller for wide compatibility, has easy selection between parallel and SPI interface with only 3 wires, includes integrated potentiometer for contrast adjustment and clearly marked pins for quick connection.

55.72 RON

LCD 1602

In Stoc

Quickly displays texts and values in Arduino and automation projects, 16 characters on 2 lines, 5V power supply and HD44780 controller for wide compatibility. It has adjustable blue backlight for good visibility, can be connected in parallel or with I2C adapter for simplified wiring in just 4 wires, compact format for easy integration into panels and housings.

11.18 RON

LCD 1604 Blue

In Stoc

Blue 1604 LCD display, ideal for displaying messages and parameters in projects with Arduino or other development boards, offers 16 characters on 4 lines for clear information, operates at 3.3-5V for easy integration, has compact dimensions of 86.96 x 60 x 13 mm and a visible screen of 62.3 x 27.6 mm.

31.93 RON

Out-of-Stock

LCD + Control + SD Card for Ramps 1.4

In Stoc

LCD panel with controller and SD card reader for 3D printers, allows direct operation and monitoring without a PC. Offers easy navigation through menus, starting and managing prints from SD card, clear display of parameters and complete interface with encoder and buttons. Connection to Ramps 1.4 is quick with the included adapter and cables.

71.89 RON

8x8 LED matrix, MAX7219, Red, SMD

In Stoc

8x8 LED matrix with red LEDs, ideal for simple displays, texts, symbols and animations in projects with Arduino or other boards. Includes MAX7219 driver for easy control via SPI interface at 5V, offers 64 LEDs with 3mm pixel in a compact 32x32mm format. Depending on the batch, it may come with the display glued or not and with variable connection accessories.

7.95 RON

I2C LCD interface module 1602, 2004

In Stoc

Simplifies connecting a 1602 or 2004 LCD to Arduino and other development boards, reducing wiring and the number of pins required. Communicates via I2C using only 2 pins, mounts directly on the back of the display, offers fast and stable connection, is ideal for projects where you want to save pins and keep the assembly clean.

5.11 RON

Addressable LED strip, RGB, WS2812, 60led/m, 10cm, Black

In Stoc

Customize the lighting by individually controlling each LED from a microcontroller like Arduino, for dynamic effects and any RGB shade. It operates at 5V, has 60 LEDs per meter, 6 LEDs per 10cm segment, black PCB with double-sided adhesive tape for quick assembly, with WS2812 chip and 5050 LEDs, some batches may have a thin layer of silicone on the LED side.

4.84 RON

Out-of-Stock

LCD mounting clamp

Out-of-Stock

LCD display clamp, ideal for holding the screen firmly during assembly or repair, made of plastic that reduces the risk of scratches, with spring tensioning system for constant pressure and stable grip. Dimensions 85 x 60 mm, easy to handle, suitable for service work and electronic assembly.

5.12 RON

Addressable LED strip, RGB, WS2812, 60led/m, 10cm, White

In Stoc

Individually control each LED for dynamic effects and RGB animations with Arduino or other microcontrollers, 10 cm segment with 6 WS2812 5050 LEDs at 5V, light in any color thanks to RGB, white PCB and double-sided adhesive tape for quick assembly, depending on the batch may have protection with a thin layer of silicone on the LED side.

3.25 RON

Expansion board TFT01, Mega, for TFT touch display

TFT01 expansion board, Mega, for TFT touch display

In Stoc

Adapter for connecting a TFT LCD touch display to Arduino Mega, ideal when the display operates at 3.3VDC and does not have a built-in regulator. It is compatible with any TFT size, maintains access to touch functions and allows the use of an SD card if present on the display. It is mounted shield-type, for quick installation and stable connections.

26.02 RON

Display LCD 2.8, TFT, Color, Shield UNO and Mega, Touch, SD, ILI9341

In Stoc

2.8 inch TFT color display with resistive touch and microSD slot, usable as a shield on Arduino UNO and Mega boards, ideal for graphical interfaces, menus and data display in embedded projects. Offers 240x320 resolution, 65K colors with ILI9341 driver, 8-bit parallel interface for fast response and integrated regulator for 3.3-5V.

86.81 RON

3.2 inch LCD Display, 240x320, Touch, ILI9341, SD, 3.3-5V

In Stoc

3.2 inch TFT color screen with resistive touch, 240x320 resolution and ILI9341 driver, ideal for graphic interfaces on STM32 and C51 projects. Offers 65K colors display on 8 or 16 bit parallel bus, includes microSD reader on the back for resources and logging, has integrated regulator for 3.3-5V power supply and XPT2046 touch controller for precise interaction.

116.05 RON

LED display module with serial interface TM1637

Display 3.5, 320x480, Arduino compatible, ILI9486, 8Bit

In Stoc

3.5 inch full color LCD screen for Arduino projects, mounts directly as a shield on UNO and MEGA without additional wiring, displays clear graphics at 480x320 and 65K colors, fast communication on 8-bit parallel bus with ILI9486 driver, operates at 3.3-5V with integrated regulator and includes SD card slot, without touch.

98.25 RON

LED Matrix Module, 4x, MAX7219, Blue

In Stoc

4x 8x8 LED matrix display for Arduino projects and other development boards, ideal for simple texts, symbols and animations. It uses the MAX7219 driver and controls all 256 LEDs with only 3 data lines, operates at 5V, has clear blue illumination and a compact 128 x 32 x 13 mm format for easy integration into panels and housings.

35.49 RON

Display 3.5 UNO, ILI9486, 320x480, 8bit, Touch

In Stoc

3.5 inch TFT touch shield for Arduino UNO and Mega2560, ideal for fast graphical interfaces and data display. Mounts directly on the board, without additional wiring, offers 480x320 resolution and 65k colors, communicates on 8-bit parallel bus for higher speed, has resistive touch with stylus, includes 5V 3.3V logic converter and integrated SD card reader.

121.12 RON

Color OLED display, 1.5 inch, RGB, SSD1351

In Stoc

1.5 inch color OLED display for clear graphics display in projects with Arduino, Raspberry Pi, STM32 and other boards, compatible with 3.3V and 5V. The OLED panel without backlight offers high contrast and deep black, 128x128 resolution and up to 262k RGB colors. SSD1351 controller and 7-pin SPI interface ensure fast integration and stable communication.

175.12 RON

LCD1602 module, shield, with buttons, blue

In Stoc

Shield LCD1602 directly compatible with Arduino UNO and MEGA, ideal for menus and quick interfaces thanks to the 6 integrated buttons. It displays 16x2 white characters, has adjustable blue backlight and adjustable contrast from the potentiometer. It operates at 5V powered from the board and uses the HD44780 parallel interface with the LiquidCrystal library.

21.91 RON

Out-of-Stock

LCD display Nokia 5110, 1.6 inch, Blue, 3.3V

Out-of-Stock

84x48 LCD screen with PCD8544 driver, ideal for Arduino projects and other development boards, displays clear text and images on a blue background. Communicates via SPI and operates at 3.3V logic with low consumption, the 1.6 inch size makes it suitable for compact interfaces and portable instrumentation.

36.46 RON

Acrylic housing for LCD1602

In Stoc

Clear acrylic housing for LCD1602 display, ideal for protection and clean mounting in electronic projects. Supplied as an unassembled kit, includes precisely cut acrylic plates and necessary screws, provides easy access to pins and a stable fit, clear finish allows full view of the display.

9.90 RON

Addressable LED matrix, 16x16, flexible, WS2812B, 5V

In Stoc

Ideal for animated displays and DIY microcontroller projects, this flexible 16x16 LED matrix offers individual control of each LED via WS2812B. It operates at 5V, renders intense RGB colors with dynamic effects, adapts easily to curved surfaces, and allows for quick connection for expansion into larger panels.

140.59 RON

Addressable LED matrix 8x32, RGB, flexible, WS2812B, 5V

In Stoc

Quickly create light displays, animations and RGB effects in Arduino projects or other development boards with 256 individually addressable LEDs in 8x32 format. The flexible membrane mounts easily on curved surfaces, operates at 5V and uses WS2812B control for intense colors and smooth transitions. Can be daisy-chained with other modules for larger displays.

143.91 RON

Addressable ring module, RGB, WS2812, LED 5050, with driver

In Stoc

Addressable RGB LED ring with 61 WS2812B 5050 LEDs, ideal for dynamic lighting effects in Arduino projects and other development boards. It is easily controlled via a single data wire, allows cascading for quick expansion, operates at 5V and provides uniform illumination over an outer diameter of 90mm.

29.96 RON

LED Matrix Module, 4x, MAX7219, Red

In Stoc

Red LED dot matrix display with 4 8x8 panels, controlled by MAX7219, ideal for messages, graphic effects and microcontroller projects. It connects easily with only 3 data lines, is compatible with Arduino and similar boards, operates at 5V and offers 256 LEDs for good visibility. Compact size 128 x 32 x 13 mm.

30.58 RON

E-Paper Screen, E-Ink, 2.13", SPI, 3.3-5V, Black

In Stoc

2.13 inch E-Ink display for Arduino, STM32, Raspberry Pi and other board projects, ideal for paper-like display with very low consumption. 296x128 resolution for clear text and icons, good visibility in bright light with 170 degree viewing angle, SPI interface for quick connection, image remains displayed even without power.

127.98 RON

Display TFT 0.96", IPS, SPI, 65K colors, LCD ST7735, 80x160, 8P

In Stoc

0.96 inch IPS color display module for Arduino projects and other development boards, ideal for compact interfaces with clear graphics and text. Offers 80x160 resolution with 65K colors and individually controllable RGB pixels, communicates quickly via SPI with ST7735S controller. Wide viewing angles thanks to IPS panel, backlight controllable via BLK pin, power and logic at 3.3V.

22.42 RON

Display TFT 1.3", IPS, SPI, 65K colors, LCD ST7789V, 240x240, 7P

In Stoc

1.3 inch IPS color display module for Arduino projects and development boards, ideal for compact graphical interfaces, menus and real-time data display. Offers 240x240 resolution with 65K colors and wide viewing angles, fast SPI control with ST7789V driver and BLK pin for backlight management, operates at 3.3V for power and logic.

30.64 RON

TTGO T-Display development board, ESP32, WiFI, Bluetooth, Display 1.14", USB Type-C

Last items in stock

Compact development board for IoT prototyping and graphical interfaces, with ESP32 dual core 240MHz, integrated WiFi and Bluetooth, 1.14 inch color IPS display for fast data display, USB Type-C with CP2104 for easy programming, support for charging and powering from a 4.2V Li-Ion battery via JST connector, includes Reset button and two buttons on GPIO.

141.55 RON

Out-of-Stock

LCD Display 7", 800x480, IPS, TFT, Capacitive Touchscreen, SDWb070T84C, TTL, RS232, 6-35V

Out-of-Stock

7 inch IPS LCD display with 800x480 resolution and capacitive touchscreen, ideal for HMI interfaces in industrial projects and electronic equipment. It plays content directly and allows for rapid GUI development with the VT9560 processor, communicates easily via TTL or RS232 with microcontrollers, operates at 6-35V and supports 90, 180 or 270 degree rotation in software.

384.61 RON

Display module 8 digits, 7 segments, MAX7219, 3.3-5V

In Stoc

8-digit, 7-segment LED display module, ideal for Arduino, STM32 or other platform projects, for quickly displaying numerical values such as temperature, clock or counters. It operates at 3.3-5V, includes MAX7219 driver for stable and simple control, communicates via SPI, has bright red LEDs and compact format 52x35x12 mm.

10.10 RON

OLED display module, RGB, 1.5 inch, 65K colors, 6-bit, 128x128, SPI, 3.3-5V

In Stoc

1.5 inch RGB OLED display for embedded and IoT projects, offers clear images at 128x128 and up to 65K colors for compact graphic interfaces. It connects quickly via SPI with 3-wire or 4-wire support, operates at 3.3-5V and has low consumption, being compatible with Arduino, Raspberry Pi and STM32.

214.09 RON

Advertising Panel Module, RGB Display, 37x9cm, 16x64, Programmable from the app, 5V

In Stoc

Programmable RGB LED panel for attractive messages in shop windows or on vehicles, with 16x64 resolution on a 37x9 cm surface. It is easily powered at 5V via USB and quickly controlled via Bluetooth from the Android or iOS application. Allows texts, animations and scrolling or flash effects, including logos and images created pixel by pixel. Displays up to 8 characters simultaneously, with scrolling for complete messages.

298.35 RON

RGB LED bar, 3D, sound control, music, VU meter, adjustable, USB 5V

In Stoc

Instantly create a dynamic atmosphere in the room, synchronizing 3D RGB lighting with music or ambient sounds via the built-in microphone. Quickly controlled from the app via Bluetooth, you can choose colors and effects, adjust brightness and reaction speed. 5V USB power supply for easy use with PC, powerbank or charger.

73.42 RON

Development board with round display, Raspberry RP2040, LCD

Development board with round display, Raspberry RP2040, 1.28 inch LCD, accelerometer, gyroscope, No Touch

In Stoc

Compact board for portable projects and graphical interfaces, with dual-core RP2040 and easy programming via USB Type-C. The 1.28-inch round LCD screen clearly displays text and graphics, and the IMU with accelerometer and 6-axis gyroscope allows motion detection for smart watches, trackers or interactive prototypes. Also includes a charging circuit for a Li-Ion battery.

201.11 RON

Display and LCD