Expansion Module

Compact hub for extending the I2C bus, allows quick and neat connection of up to 10 sensors or modules to the same microcontroller. It distributes the SDA and SCL lines in parallel to 10 ports with 2.54 mm pins, operates at 3.3-5V, and is ideal for prototyping and testing with Arduino, ESP32, ESP8266, or Raspberry Pi Pico.

Quickly expand your microcontroller's I/O with 16 I2C-controlled ports using only SDA and SCL. It operates at 2.5-5.5V and is compatible with 3.3V or 5V boards thanks to the integrated level converter. Each pin is independently set as input or output, and the open-drain interrupt pin signals changes, ideal for relays, LEDs, buttons and buzzers.

Quickly expand the number of GPIO pins via I2C, ideal for Arduino and other resource-constrained boards. It offers 8 bidirectional inputs and outputs, operates at 2.5-6V and communicates up to 400kHz. The I2C address is easily selected via switches, and cascading support allows up to 8 modules to be connected to the same bus.

It extends the I2C bus and eliminates address conflicts, allowing up to 8 identical sensors or modules to be connected to the same microcontroller. It has 8 channels selectable by sending a byte, configurable own address 0x70-0x77 via A0-A2, operates at 2.3-5V with 3.3-5V logic without level shifter, supports up to 400kHz for quick integration with Arduino and other boards.

Quickly expands the number of inputs or outputs of the microcontroller, allowing reading or switching of up to 16 channels through a single signal pin. Based on the CD74HC4067, it supports analog and digital signals, operates at 3-6V and is compatible with Arduino and other development boards. Channel selection is simple via 4 address pins, and the EN pin allows quick activation or deactivation.