LED modules

Compact RGB 5050 SMD LED board for signaling and color effects in Arduino and automation projects. It operates at 3-5V, is easily controlled via PWM on the R, G, B channels, has integrated resistors for current limitation, and the DIP pins allow for quick assembly on breadboard or in prototypes.

You discreetly control LED strips without contact, by touch or by moving your hand 10–20 mm away, with hidden installation behind wood, glass, or plexiglass up to 5 cm, without drilling. It works on 5–24V DC, supports up to 3A, has 4 selectable modes including ON/OFF and continuous dimming, with very low standby consumption and a compact 32x32 mm board.

Compact solution for RGB lighting effects controlled in DIY and ambient projects, with 6 SMD5050 LEDs per 10 cm, each pixel individually addressable through the integrated WS2812B controller. It operates at 5V and is easily controlled through a single data pin with Arduino, ESP32, or Raspberry Pi. Cut spacing at each LED, IP20 for indoor use.

Ideal for visual display and quick testing of digital outputs on Arduino and similar boards, the 8-LED common cathode bar allows individual control of channels with LOW activation. It operates directly at 3-5V thanks to integrated resistors, has low power consumption and different color LEDs for easy signal identification in debugging, status indicators and DIY projects.

Easily control common cathode RGB LED strips from Arduino or other boards via serial commands at 9600bps. Provides fine dimming on each RGB channel via PWM, operates with 3.3-5V logic and has 3-way MOSFETs for loads up to 12V strips. Screw connectors for LED and power ensure quick and secure installation.

Addressable RGB LED ring with 61 WS2812B 5050 LEDs, ideal for dynamic lighting effects in Arduino projects and other development boards. It is easily controlled via a single data wire, allows cascading for quick expansion, operates at 5V and provides uniform illumination over an outer diameter of 90mm.

Ideal for simulating a traffic light in Arduino projects and other development boards, the module includes red, yellow and green LEDs with integrated resistors for direct connection to 3.3-5V. It quickly mounts on a breadboard, has digital inputs and a common cathode interface, and offers a compact 56mm form factor for easy prototyping and testing.

Customize the lighting by individually controlling each LED from a microcontroller like Arduino, for dynamic effects and any RGB shade. It operates at 5V, has 60 LEDs per meter, 6 LEDs per 10cm segment, black PCB with double-sided adhesive tape for quick assembly, with WS2812 chip and 5050 LEDs, some batches may have a thin layer of silicone on the LED side.

8x8 LED matrix with red LEDs, ideal for simple displays, texts, symbols and animations in projects with Arduino or other boards. Includes MAX7219 driver for easy control via SPI interface at 5V, offers 64 LEDs with 3mm pixel in a compact 32x32mm format. Depending on the batch, it may come with the display glued or not and with variable connection accessories.