Switching Module

Electronic ON-OFF switching solution with single-press operation, ideal for quick power control in embedded projects and portable devices. It operates at 3.3-20V and switches up to 11A, has ultra-low standby consumption, compact dimensions of 15x18mm for easy integration, supports simple connection between source and load, and allows for an external button.

You discreetly control LED strips without contact, by touch or by moving your hand 10–20 mm away, with hidden installation behind wood, glass, or plexiglass up to 5 cm, without drilling. It works on 5–24V DC, supports up to 3A, has 4 selectable modes including ON/OFF and continuous dimming, with very low standby consumption and a compact 32x32 mm board.

Switch high-power DC loads quickly and directly from a logic or PWM signal, without mechanical relays, supporting up to 100V and 300A peaks. Based on the AOTL66912 MOSFET with very low on-resistance for reduced losses, it is driven at 5–18V, ideally 10–12V at high currents, low-side, on an ultra-compact 14x15mm board.

4-channel MOSFET module for safe control of DC loads such as LED strips, motors or electronic modules, compatible with Arduino and other boards. It operates at 5V supply and accepts 3.3-5V signal, the channels activate at HIGH, has PS2801-4 optoisolation with common GND and status LED on each channel, supports up to 100V and 10A per channel.

Dimmable touch switch for discreet lighting control, it is mounted hidden behind wooden, plastic or glass panels and operates by touch through materials up to 25 mm. A short press turns the light on or off, a long press adjusts the intensity between 10 and 100%. It operates at 12-24VDC, supports up to 5A 60W, ideal for LED strips and compact lighting fixtures.

Switches and regulates LED strips, DC motors and other loads via PWM, controlled by Arduino or microcontrollers. It has opto-isolator for power control separation, 3-12V input and 5-36V output, supports up to 22A with active cooling, 2.54mm DuPont compatible pins for quick connection.

IRF520 MOSFET module for Arduino and other development boards, ideal for PWM control of DC loads such as LED strips, power LEDs or motors. Allows 3.3-5V signal control of consumers up to 24V DC and 5A. Provides fast and stable switching, easy integration into DIY projects and automation.

Dual MOSFET module for precise control of DC loads between 5 and 36V, ideal for PWM control of motors, LED strips, or electromagnets. Supports 15A continuous and peaks up to 30A, receives a 3.3-20V signal from Arduino or other controllers, switches up to 20kHz, and offers low losses through low RDS(on), with dissipation up to 400W with adequate cooling.