Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
360 degree LIDAR module, M1C1, rotating, UART
2D LiDAR sensor with 360° laser scanning, ideal for autonomous navigation, mapping and obstacle avoidance, quickly generates a detailed point cloud for precise positioning, detects up to 8 m with optimal performance between 0.1 and 6 m, angular resolution approx. 0.93° and scanning at 10 Hz, UART interface for easy integration and low typical consumption of 1 W.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The M1C1 Mini 360° Laser Scanning LiDAR sensor uses an advanced 2D laser scanning system based on the triangulation principle, ideal for autonomous navigation and mapping. It provides a 360° scan, generating a detailed point cloud of the environment, ideal for obstacle avoidance, autonomous positioning and map construction and virtual map creation.
The base of the module is fixed, the upper element rotating constantly, through a brush mechanism.
It is capable of detection up to a distance of 8 meters, being optimized between 0.1 and 6 meters.
It has an angular resolution of 0.9° and a scanning frequency of 10Hz, with strong resistance to ambient light interference and low power consumption for long-term use.
It uses a Class I laser, safe for humans and animals.
Specifications:
Operating voltage: 5VDC
Light source: Laser @ 780nm, Class I
Operating principle: Triangulation
Detection distance: 0.1 - 6m (maximum 8m)
Measurement accuracy: <1mm at 1m, 2% between 1-6m
Field of view: 360° horizontal
Angular resolution: ≈ 0.93°
Measurement frequency: 3860 points/s
Rotation speed: 10Hz
Power Consumption: Typical 1.0W
Communication interface: serial UART
Baud Rate: 150000
Signal format: Angle, distance, etc.
Weight: 98g
Dimensions: 100.95 × 60.50 × 45.30 mm
Use:
The module board comes with a 4-pin, PH1.25 connector, which provides access to the VCC (5VDC), TX , GND and RX pins.
Connect the microcontroller to the Lidar module correctly using the above diagram for power and communication. After supplying 5V, the laser will start rotating. Provide the necessary current for operation (minimum 1W).
Mount the sensor on the robot or smart equipment, ensuring it has a clear view of the scanning area.
Initialize the system and check the motor speed, ensuring that the scan is performed consistently at 10Hz.
Clean the sensor lens periodically to avoid interference caused by dust and dirt.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Salut, un prieten a cumpărat două bucăți, le-a alimentat la 5V, pornesc motoarele automat când le alimentează, pe camera de la telefon se vede că laserul ir pornește, dar nu scoate nici un modul date pe uart. Tu cum ai reușit să le pornești datele?
Partea buna: functioneaza si este ieftin. Partea proasta: conectorul de iesre este unul mai rar intalnit, si vine fara cablu/conector, am avut noroc ca am avut unul si nu am recurs la metode barbare pentru a-l conecta. Documentatie greu de gasit pe net, dupa o zi de cautare pe google fara succes, am avut noroc cu o cautare pe github.
