Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Pair of XT60 plugs, Male and Female, with 10cm wire
Set of male and female XT60 connectors with a 10 cm cable, ideal for quick and secure connections in RC applications, batteries, and power supplies. 14AWG pre-tinned wires, tinned ends, and heat shrink tubing installed for a clean installation. Supports up to 60A and withstands soldering temperatures up to 260 degrees C.
Shipping by Thursday 22 October
Buying this product earns you Ft91.15 in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The XT60 connector pair, with one male and one female connector, comes with wires already soldered, making it ready for quick and secure connection of LiPo batteries, ESC controllers, motors, and other high-current DC loads. It is suitable for drones, RC cars and planes, model boats, chargers, power supplies, and DIY projects that need an easily disconnectable power connection.
XT60 connectors have two banana-style contacts with a 7.2 mm pitch, and the housing shape is asymmetrical and does not allow reverse-polarity mating. The cable has a 14 AWG cross-section and a length of 10 cm, and the stated maximum current for the pair is 60 A. The wire ends are already tinned, so they can be soldered directly to a battery, distribution board, or other circuit without additional preparation.
Among the main features are the rigid yellow plastic housing, gold metal contacts, red and black wires for easy polarity identification, and the heat-shrink tubing already mounted at the junction between the connector and the cable, which protects the solder joint and provides better strain relief for the wire. The product is a passive connector and does not require its own power supply.
The connectors are compatible with any equipment or cable fitted with standard XT60 connectors, and the male connector mates only with the female one.
Specifications:
Rated voltage: 500 VDC
Maximum current: 60 A
Connector: XT60
Configuration: 1 pair, male and female
Number of contacts: 2
Contact pitch: 7.2 mm
Cable type: 14 AWG
Cable length: 10 cm
Maximum temperature: 260 degrees C
Package contents: 1 x male connector with wire, 1 x female connector with wire
Usage:
Identify the polarity before connecting, with the red wire for positive (+) and the black wire for negative (-).
Solder the tinned ends of the wires to the battery terminals, the controller, or the distribution board, following the colors and polarity.
Check that the solder joints are clean and well made, and that the wires do not touch each other, then insulate any exposed area with heat-shrink tubing.
Mount the female connector on the side that remains live when disconnected, for example on the battery, to avoid accidental short circuits between exposed contacts.
Connect the plugs by pressing firmly until they are fully inserted, without forcing them, since the housing shape allows only one mating position.
Do not connect or disconnect the plugs under heavy load, to avoid sparks and wear on the contacts.
Do not exceed the maximum current of the connector and cable, and for continuous operation at high currents check the heating of the connection.
Disconnect the plugs by pulling on the housings, not the wires.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
