LED Strip Connectors

20 AWG 3-wire extension cable with JST SM connector, used to extend the connection between a WS2812 or WS2811 addressable LED strip and the controller or power supply. The red, green, and white wires are easy to identify for power, data signal, and ground; the conductor is copper with PVC insulation, and the 300 VDC rated voltage covers any 5 V or 12 V installation. Suitable for LED installations, control panels, and DIY projects with addressable strips.

Extension cable with 4 wires of 20 AWG, tinned copper conductor and PVC insulation, for analog RGB LED strips and WS2811 or WS2812 addressable strips powered at 12V. The stripped and tinned ends allow soldering, terminal block connection, or crimping, while maintaining the order of the power and signal wires between the controller and the strip. It withstands 300 VDC and 80 °C, making it ideal for extending decorative lighting installations.

Allows quick and safe joining of two 10mm addressable LED strips, for straight line extension without soldering. Compatible with WS2811, WS2812B, WS2813 and SK6812, has 3 pins for signal and power, operates at 5V, 12V or 24V. PVC housing ensures stable fixation and easy connection by closing with a lid.

L-shaped quick connector for joining two 10mm addressable LED strips at 90 degrees, without soldering, compatible with WS2811, WS2812B, WS2813 and SK6812. It has 3 pins for stable connection, works at 5V, 12V and 24V, includes right angle PCB for clean corners and durable PVC housing, ideal for routes with direction changes.

Allows for quick creation of a T-shaped branch for 10mm addressable LED strips, without soldering, with secure connection via 3 pins and internal T-shaped PCB. The durable PVC housing ensures durability, is compatible with WS2811, WS2812B, WS2813 and SK6812 RGB, supports 5V, 12V and 24V, ideal for installations requiring parallel branches.

X-shaped quick connector for 10mm addressable LED strip, allows for solderless branching and quick assembly by attaching with a cover. It has 4 3-pin sockets and internal X-shaped PCB for distributing connections, being compatible with RGB strips type WS2811, WS2812B, WS2813, SK6812. The durable PVC casing makes it suitable for outdoor installations.

Quick connector with wires for uninsulated 3528 or 5050 LED strips, allows cutting and reconnecting without soldering, for quick and safe installation. It is fixed by a lid with closure, is compatible with 8 mm and 2-pin strip, includes 15 cm cable for flexible connections, durable PVC housing for stable use in lighting installations.

Quick connector with wires for 10 mm RGB LED strips, 4 pins, allows cutting and reconnection without soldering, for quick and clean installation. Secure grip with locking cap, easy alignment on copper contacts, 15 cm cable for flexible connections, durable PVC housing, compatible with non-waterproof strips with 4 contacts.

Quick connector with wires for 10mm addressable LED strips, 3 pins, allows for quick cutting and reconnection without soldering. Easy to install by opening the cover, inserting the strip and closing for secure fixation. Compatible with 3P WS2812 type strips, 15 cm cable for convenient connections, durable PVC body for stable use in LED projects.