Imaginile produselor au caracter informativ si pot prezenta diferente minore, in functie de lot si de furnizor. Este posibil ca specificatiile si pretul produselor sa fie modificate fara preaviz. Facem tot posibilul sa adaugam in pagina produselor specificatii cat mai exacte si corecte dar este posibil ca acestea sa nu fie in totalitate corecte. in cazul in care identificati un astfel de caz, va rugam sa ne semnalati acest lucru.
Produsul este destinat specialistilor si necesita personal calificat si autorizat. Produsul nu include instructiuni de asamblare/utilizare. Punerea in functiune a produsului de catre persoane necalificate duce la pierderea garantiei conform Termenilor si Conditiilor din site.
Bluetooth 4.2 BLE audio module, stereo, MH-M18
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Bluetooth 4.2 audio module, M18.
It is a module with low current consumption, supports the latest Bluetooth 4.2, two stereo channels for lossless playback. In open spaces, the distance reaches up to 20 meters.
Supply voltage: 3.7 - 4.2V (via lithium battery) and 5V
Supported Bluetooth protocols: HFPV1.7, A2DPV1.2, AVRCPV1.5, AVCTPV1.2, AVDTPV1.2
Standby consumption: 5.5mA
Operating consumption: 20mA
Deep sleep consumption: 3uA
Button support: Yes
Volume and Mute adjustment: Yes
Functions:
Pine tree | Function | Description |
1 | KEY | Button control terminal (4 button functions, additional resistors such as wiring diagram) |
2 | move | Mute control terminal (output high level 3.3V when muting, output low level during playback) |
3 | VDC | Positive power supply 5V (lithium battery 3.7V power supply requires short circuit diode) |
4 | GND | Power negative / audio signal ground |
5 | IT | Left channel output |
6 | R | Right channel output |
It is recommended to connect the wire directly to GND (without plugs) over a distance as short as possible for a good sound quality.
The antenna of the mod is sensitive to electromagnetic interference, which can cause problems with the quality of the signal.
In MUTE mode, the module outputs a logic voltage of 3.3V and during playback 0V. To change the behavior, depending on the available amplifier, see the following scheme for inversion.