OV7670 camera module

In Stoc

VGA camera for Arduino and other projects, ideal for capturing and transmitting images, photos and recognition applications. Offers 640x480 resolution, I2C communication, 3.3V power supply with IO at 2.5-3V, 6mm lens and 8-bit output with YUV or RGB formats, includes automatic exposure, gain and white balance functions for stable images.

12.91 RON

CAN Module, MCP2515, CAN V2.0B, 5V

In Stoc

Ideal for reading and monitoring the CAN network of the car with Arduino or other development boards, this CAN module with MCP2515 supports the CAN V2.0B standard and communication up to 1Mb/s. It operates on 5VDC power supply, has a compact 44 x 28 mm format for easy integration into projects, includes library support and example code from GitHub for quick implementation.

10.88 RON

SD card mode

In Stoc

Allows reading and writing data to SD card directly from Arduino projects, ideal for logging, storing configurations or files. Communicates quickly via SPI interface, supports SD and SDHC cards, is powered at 5V on VCC with integrated 3.3V regulator for compatibility, has 6 essential pins and 4 M2 mounting holes for secure mounting.

4.66 RON

Clock Module, RTC, PCF8563

In Stoc

Keeps time and date with low power consumption, ideal for Arduino, Raspberry Pi and automation projects. PCF8563 offers simple I2C communication, 3.3V or 5V power supply with back-up battery, good stability compared to classic DS1307 modules, compact dimensions for easy integration into assemblies.

5.82 RON

MAX3232 mini RS232 to TTL MCU converter module

In Stoc

The RS232 to TTL converter enables communication between the RS232 port of a PC or laptop and the TTL UART of microcontroller projects, offering stable bidirectional conversion based on the MAX3232 chip. It operates at 3.0V–5.5V, supports transfer rates up to 120 kbps, has low power consumption and is suitable for prototyping, robotics and educational applications.

2.96 RON

Battery charging module XH-M602, 220VAC, display, 0-99.9VDC

In Stoc

Module for automatically maintaining charged batteries, monitors voltage and controls via relay the charger start and stop between set thresholds. It has a display for quick START STOP display and adjustment, operates at 220VAC with integrated power supply, controls batteries in the range 0-99.9VDC, suitable for UPS, solar systems and industrial applications.

44.62 RON

Programmer, Serial converter, USB 2.0 to TTL UART, CP2104 STC PRGMR

In Stoc

USB 2.0 to TTL UART module with CP2104 for fast programming and debugging of STC boards and microcontrollers, offers stable transfer up to 12 Mbps, direct connection via USB type A and 6-pin TTL header 3.3V, RST, TXD, RXD, GND, 5V. It is compatible with CP2102 drivers and includes 4 female-female Dupont wires for easy connection.

23.41 RON

LM7805 voltage regulator module, 5V, 1.5A

In Stoc

Provides stable 5V power supply for electronic projects and industrial equipment, using the LM7805 regulator, accepts both DC 8-15V and AC 6-12V power supply without worrying about polarity thanks to the integrated 3A rectifier bridge, delivers up to 1.5A peak with low noise and good stability under load variations, compact 57x23mm format for quick integration.

10.94 RON

Dimmer touch module with PWM control

In Stoc

Touch dimmer module with PWM control for fine adjustment of light or other tasks in projects with Arduino and similar boards, also works independently, on/off with short touch and stepless adjustment with long touch, the sensor remains active even covered with acrylic or plastic up to 3 mm, 2.4-4.5 V power supply and dedicated outputs for LED.

4.92 RON

KY-008 laser diode module

In Stoc

The laser diode module is ideal for Arduino projects and other development boards, useful for pointing, alignment and optical experiments. It operates on 5VDC power supply, emits a red beam at 650nm, has a simple interface for quick command and a compact format that is easy to integrate into prototypes.

3.15 RON

HB100 Radar Doppler Module

In Stoc

10.525GHz microwave Doppler radar module for detecting object movement at over 20 m, ideal for automation, security and industrial projects. It operates at 5VDC, has low consumption, integrated antenna with 8dBi gain and wide detection angle, provides stable Doppler signal for processing with external amplifier.

18.45 RON

Dual power MOSFET module, 15A, 400W

In Stoc

Dual MOSFET module for precise control of DC loads between 5 and 36V, ideal for PWM control of motors, LED strips, or electromagnets. Supports 15A continuous and peaks up to 30A, receives a 3.3-20V signal from Arduino or other controllers, switches up to 20kHz, and offers low losses through low RDS(on), with dissipation up to 400W with adequate cooling.

2.83 RON

AT24C256 I2C EEPROM module

In Stoc

The AT24C256 EEPROM module provides non-volatile memory for storing settings and data in microcontroller projects. It communicates quickly via a two-pin I2C interface, has a capacity of 256 Kb, operates at common 3.3V or 5V voltages, is compatible with the AT24CXX family, and is easy to integrate on breadboards or in prototypes.

7.24 RON

AT24C256 V2 EEPROM module, I2C

In Stoc

Easily expands memory for Arduino projects, ideal when the EEPROM in the ATmega is no longer sufficient. Stores data permanently even without power, communicates quickly via I2C, offers 256Kbit 32KB capacity, operates at 1.8-5V and allows easy replacement of the AT24C256 chip for maintenance or upgrade.

9.68 RON

Out-of-Stock

Infrared emitter module KY-005

In Stoc

IR transmitter for remote control and infrared communication projects with Arduino or other development boards, operates at 5V for easy integration, has low consumption of approximately 90mW for energy efficiency, compact format 18.5 x 15 mm for quick assembly on prototypes, suitable for emitting IR signals to compatible receivers and equipment.

2.88 RON

High voltage generator module, 400KV

In Stoc

Generates high voltage up to 400KV from 3-6VDC power supply, ideal for experiments, demonstrations and DIY projects, offers strong arc output and consumption over 2A for high performance. Operates in intermittent mode 30 seconds ON with a 2 minute break, has compact dimensions 64 x 24.5 mm for easy integration.

17.12 RON

Gyro and accelerometer module, 3 axes, GY-521, original IC

In Stoc

Compact solution for measuring orientation and movement in space, ideal for robotics, drones and tilt detection. Integrates original MPU-6050 sensor with 3-axis accelerometer and gyroscope, I2C communication for quick connection to Arduino and other microcontrollers, 3V-5V power supply via integrated LDO regulator, durable PCB with gold finish for stable contacts.

25.36 RON

NEO6MV2 GPS module

In Stoc

GPS module compatible with Arduino and other development boards, ideal for quickly integrating satellite positioning into DIY and industrial projects. It offers serial communication at 9600 bps, ceramic antenna for stable reception, EEPROM with backup battery for data retention during power outages, and an integrated 3.3V regulator for direct operation at 3-5V.

30.78 RON

GSM GPRS SIM800L Quad Band module plus antenna

In Stoc

Adds GSM GPRS connectivity to Arduino projects and other boards, ideal for SMS, calls and data transfer. Quad band operation, simple communication via TTL serial port without MAX232, automatic start-up and includes antenna for better reception. Status LEDs quickly indicate the presence or absence of signal, 3.7-4.2V power supply and 3.3V.

45.56 RON

SIM800L 2.0 module, GSM, GPRS, Quad-band, with antenna

In Stoc

Quad-band GSM GPRS module for IoT projects and remote control, compatible with Arduino and other boards, uses MicroSIM and includes external rigid antenna with UFL-SMA cable for stable signal. Offers TTL serial interface and support for SMS, calls and data, works in 850 900 1800 1900 MHz networks, requires external power supply 4.5-5V with current over 1A.

72.54 RON

Out-of-Stock

Thermostat module 12V, 999C, XH-W1315

Out-of-Stock

Automatically control heating or cooling of equipment with this 12VDC thermostat module, with relay switching for on/off. Offers two working modes H and C, wide measurement range -30 to 999 degrees C, simple adjustment with buttons, 1 degree resolution and accuracy of approximately plus or minus 2 degrees, compact format for quick integration.

97.99 RON

Compatible development board WeMos D1 Mini, ESP8266, ESP-12F

WeMos D1 Mini, ESP8266, ESP-12F compatible development board

In Stoc

Compact development board with ESP8266 and WiFi, ideal for IoT projects and fast automation. Powered at 5V via MicroUSB, operates at 3.3V logic, has 4MB Flash and CH340G USB interface for easy programming. Offers 9 digital pins, 1 analog input and support for Arduino IDE or LUA code.

24.97 RON

D1 MH-ET MiniKit development board, ESP32, WiFi + Bluetooth 4.2, ESP8266

In Stoc

Compact board for IoT prototyping and automation, with ESP32-WROOM-32 dual core and 2.4GHz WiFi connectivity plus Bluetooth 4.2 BLE for fast communication. Wemos D1 Mini format, compatible with D1 shields on the white pin row, 5V power supply with 3.3V logic, 4MB Flash and 530KB SRAM, antenna integrated into the PCB for easy installation.

44.66 RON

ESP32 development board, CH340C, 4MB, WiFi and Bluetooth

LilyPad 328p development board

In Stoc

The ideal board for wearables projects, it is easy to sew into clothes thanks to the large holes for the conductive wire. It uses the ATmega328p as on the Uno R3, runs at 8MHz and supports 3-5V power supply. It offers 14 digital, 6 analog and 6 PWM pins for sensors and actuators, includes a Reset button and has a slim 50mm round format.

61.00 RON

Lua NodeMCU ESP8266 CH340G WiFi development board

Lua Wifi NodeMCU development board, CH340G, ESP8266

In Stoc

Development board for IoT projects with integrated WiFi, based on ESP8266 and Lua firmware, compatible with Arduino IDE for rapid programming. Offers 802.11 b/g/n 2.4GHz connectivity, 4MB Flash, GPIO PWM I2C SPI and ADC interfaces for sensors and actuators, stable serial communication via CH340G, flexible power supply through Type-C or Vin.

24.94 RON

Mega 2560 R3 development board, CH340, Arduino compatible

In Stoc

Ideal for complex projects and prototyping, this Arduino-compatible board uses the ATmega2560 and CH340 USB interface, offers 54 digital pins with 14 PWM and 16 analog inputs, runs at 5V with a 16 MHz clock, has 256 KB Flash memory and stable connection for rapid development. Limited to 4 pieces per order.

121.13 RON

NANO v3 ATmega328p Arduino-compatible dev board

NANO v3 AtMega 328p development board, Arduino compatible

In Stoc

Ideal for prototyping and compact projects, especially line-following robots with 8 sensors, it uses the ATmega328p like the UNO but in a reduced format. It offers 14 digital pins with 6 PWM and 8 analog inputs, is quickly programmed in the Arduino IDE via mini USB, has a CH340G USB converter and can be powered at 5V via USB or via VIN 5-12V.

27.76 RON

NANO v3 AtMega 328p development board, Arduino compatible, unsoldered pins

In Stoc

Ideal for rapid prototyping and compact electronics projects, the ATmega328p board offers Arduino compatibility, simple mini USB connection with CH340G, 5V operation and 16MHz frequency for stable execution. It has 14 digital pins, including 6 PWM, and 8 analog inputs, suitable for sensors, automation and motor control. The pins are solderless for flexible mounting.

26.28 RON

Pro Micro development board, 5V, ATmega32U4, MicroUSB

In Stoc

Compact Arduino project board with native USB interface, ideal for automation, HID keyboards and rapid prototyping. Based on ATmega32U4 at 16MHz, it offers 5V power supply via USB or VCC and 6-9V on RAW, 12 digital pins with 5 PWM and 4 analog inputs. Compatible with Arduino IDE by selecting the Leonardo board.

47.77 RON

PRO MINI 3.3V development board

In Stoc

Ideal for compact and low-power projects, this ATmega328P board runs at 3.3V and 8MHz, is programmed from the Arduino IDE via a TTL-USB adapter, has 14 digital and 8 analog pins for fast interfacing, and is powered on the RAW pin at 5-12VDC via an integrated regulator.

37.40 RON

PRO MINI 5V development board

In Stoc

Compact board for Arduino projects with Atmega328P at 16MHz, ideal for prototyping and automation where space matters. It is programmed by external programmer via TTL-USB, powered on the RAW pin at 5-12VDC with integrated regulator, offers 14 digital pins, 8 analog and 6 PWM outputs for sensors, controls and actuators.

22.31 RON

UNO R3 Development Board, Arduino Compatible, ATmega328p, CH340G, with Pin Header, Type-C

In Stoc

Arduino-compatible development board for rapid prototyping and electronic projects, with ATmega328p and USB Type-C interface via CH340G for easy programming from the Arduino IDE. It offers 5V logic, 14 digital pins with 6 PWM and 6 analog inputs, operates at 16MHz, and includes a male pin header for quick connection to modules and sensors.

30.93 RON

Out-of-Stock

UNO R3 Arduino compatible development board, AtMega328p, CH340G, MiniUSB

Out-of-Stock

Arduino compatible development board for rapid prototyping and educational projects, based on ATmega328P with MiniUSB interface and CH340G USB controller. Offers automatic USB or DC power supply, 14 digital pins with PWM and 6 analog inputs, works with most Arduino libraries and shields. Includes male pin header.

30.40 RON

Uno R3 board with ESP8266 WiFi and CH340 USB

Uno R3 development board with Wifi ESP8266, Arduino compatible

In Stoc

The Arduino compatible development board combines ATmega328p with ESP8266 Wifi module for IoT and automation projects, offers stable USB connection via CH340 for fast programming, includes switches for easy selection of working mode between microcontroller and Wifi, keeps the standard Uno R3 pinout with 14 digital and 6 analog pins, provides 3.3V and 5V outputs.

49.45 RON

Sensor shield V5.0 expansion board

In Stoc

It mounts directly on the UNO development board and simplifies the quick connection of sensors and servos, providing pins organized by channels for signal, VCC and GND, includes separate 2-pin power connector for VCC and GND, reduces wiring and the risk of wrong connection, ideal for prototyping and educational projects.

10.90 RON

ATTINY85 development board, integrated USB

In Stoc

Digispark compatible development board with ATtiny85 and integrated USB is ideal for compact automation projects, LED control and simple actuators. It is quickly programmed from the Arduino IDE, powered directly from 5V via USB, includes stable regulator and status LED for testing. It offers 6 digital IO pins, with 3 PWM, and 4 analog inputs for easy sensor connection.

28.60 RON

Double laminated PCB board 10x15cm

In Stoc

Ideal for prototyping and rapid electronic circuit development, this double-layered PCB board offers copper on both sides for more compact routing and connections. It has a 100 x 150 mm format, uniform copper surfaces for reliable soldering, allows for double-sided projects and is suitable for both hobby work and technical applications.

7.37 RON

Laminated PCB board 10x15cm

In Stoc

The copper-laminated PCB board is ideal for quickly making printed circuits by etching or etching. It has a size of 10x15 cm, uniform copper surface for precise transfer, single-sided construction for simple projects and prototypes, rigid material easy to process and cut as needed.

7.60 RON

Double-sided prototyping PCB board, 2x8cm

In Stoc

Ideal for rapid prototyping and electronic circuit design in the workshop or laboratory, the green double-sided PCB board offers 2 layers for flexible routing and stable soldering. The 2x8 cm format is compact and easy to integrate into projects, and the range of available sizes allows you to choose the right version for any assembly.

2.69 RON

Double-sided prototyping PCB board, 3x7cm

In Stoc

Ideal for rapid prototyping and electronic assembly, this double-sided green PCB board offers 2 layers for more flexible routing, well-aligned pads for secure soldering, compact 3x7 cm size easy to integrate into projects, suitable for testing, repairs and development in the workshop or laboratory.

2.67 RON

Double-sided prototyping PCB board, 4x6cm, FR4

In Stoc

Ideal for rapid prototyping and circuit testing, this green, two-layer FR4 board allows mounting on both sides for more compact traces, has a 40 x 60 mm format that is easy to integrate into projects, standard 2.54 mm pitch compatible with common pins and components, and offers good rigidity and resistance for repeated soldering.

3.75 RON

Double-sided prototyping PCB board, 5x7cm

In Stoc

Ideal for rapid circuit assembly in the test and development phase, this double-sided green prototyping board offers 2 layers for more flexible routing and connections, allows stable component soldering, has a compact 5x7 cm format that is easy to integrate into projects, and is also available in other sizes for different applications.

4.07 RON

Double-sided prototyping PCB board, 7x9cm, FR4

In Stoc

Ideal for rapid prototyping and component assembly by soldering, this green two-layer FR4 board offers traces on both sides for more compact designs, standard 2.54 mm pitch for compatibility with common pins and modules, 70 x 90 mm size for easy integration into housings and stands, robust support for stable soldering and repeated testing.

6.07 RON

Prototyping PCB board, single sided, 5x7

In Stoc

Ideal for rapid prototyping and experimental assembly, this single-sided prototyping board provides a stable base for soldering and testing. It has compact dimensions of 5 x 7 cm, is made on FR4 standard for rigidity and thermal resistance, allows for neat arrangement of components and is perfectly suited for electronic laboratory or hobby projects.

2.95 RON

Prototyping PCB board, one side, 7x9

In Stoc

Ideal for rapid circuit prototyping and component testing, this single-sided prototyping board provides a stable and easy-to-work base. It has a compact 7 x 9 cm size, is made on FR4 standard for rigidity and good insulation, allows for precise soldering and easy integration into small to medium-sized electronic projects.

6.32 RON

Mechatronics and IoT

Subcategories