Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Inductive proximity sensor, NPN, NO, LJA18M-10N1, 6-36V
Inductive proximity sensor for non-contact detection of metal objects, ideal for automation and DIY projects. It mounts quickly on an M18 thread, has an NPN NO output compatible with PLC and Arduino, operates at 6-36 VDC, and offers detection up to 10 mm. Rugged housing with IP67 protection and a status LED for quick verification.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Inductive sensor from the LJA series designed for non-contact detection of metal objects. The cylindrical body with a diameter of 18 mm (M18) allows quick mounting in various industrial applications or DIY projects. The LJA18M-10N1 variant features a detection distance of 10 mm, NPN output, normally open (NO), operates at a supply voltage ranging from 6-36 VDC, and comes with an integrated 2-meter cable with 3 wires. The sensor is of the non-flush type.
The status LED indicates the presence of an object within the detection range, and the built-in protections (short circuit, reverse polarity) ensure safe operation in industrial environments.
Specifications:
Body diameter: 18 mm (M18)
Mounting type: Non-flush
Supply voltage: 6 - 36 VDC
Current consumption: ≤ 15 mA (no load)
Output current: ≤ 300 mA
Standard detection distance: 10 mm
Response frequency: 0.2 KHz
Output type: NPN, NO (normally open)
Protections: Short circuit, reverse polarity
Operating temperature: -25 ~ 65°C
Protection rating: IP67
Cable: 3 wires, 2 m length, PVC insulation
Housing material: Nickel-plated brass
Sensing surface: ABS
Pinout:
| Wire color | Signal | Description |
|---|---|---|
| Brown | VCC | Positive power supply (6-36V DC) |
| Blue | GND | Ground |
| Black | OUT | NPN Output |
Usage:
Install the sensor on an M18 compatible mount, ensuring a clear distance from other metal objects that could interfere with detection.
Connect the brown wire to the power source (6-36 VDC), the blue wire to ground, and the black wire to the controller input (PLC, Arduino, relay, etc.).
For stable operation, it is recommended that the working distance be set to a maximum of 70% of the standard detection distance. The standard detection distance (10 mm) applies to iron. For other metals, the effective distance is calculated by multiplying the standard detection distance by the corresponding correction factor:
Steel: ~0.9
Brass: ~0.7
Chrome-nickel: ~0.6
Aluminum: ~0.4
In the absence of a metal object in front of the sensor, the output is OFF (zero voltage). When a metal object enters the detection range, the output switches to GND (LOW level), activating the load connected between the output and VCC. The built-in LED lights up simultaneously.
Attention!
Do not exceed the maximum output current of 300 mA. For large loads (gear motors, bulbs, etc.), use an intermediate relay.
In applications with strong interference, install an overvoltage protection device.
Do not use the sensor during the first 100 ms after powering on, as this is the stabilization period.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
// LJA18M-10N1 - Inductive proximity sensor test
// NPN NO output connected to digital pin 7
// Pull-up resistor required (use INPUT_PULLUP)
const int sensorPin = 7;
void setup() {
pinMode(sensorPin, INPUT_PULLUP);
Serial.begin(9600);
Serial.println("LJA18M-10N1 sensor test started");
delay(200); // Wait for sensor stabilization (min. 100ms)
}
void loop() {
int state = digitalRead(sensorPin);
// NPN NO: output pulls LOW when object detected
if (state == LOW) {
Serial.println("Object detected");
} else {
Serial.println("No object");
}
delay(200);
}
