Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Cap, potentiometer knob 6mm, 15x17, Blue
Plastic knob for potentiometer with 6 mm shaft, ideal for precise level control in electronic and industrial equipment. It has compact dimensions of 15x17 mm, firm grip on the shaft for stable adjustments, easy-to-handle finish, blue color for quick identification on the panel.
Shipping by Thursday 22 October
Buying this product earns you 0.10 RON in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The plastic rotary knob is intended for potentiometers with a 6 mm shaft and replaces or complements the adjustment knob of a rotary potentiometer. It is used in audio equipment, power supplies, amplifiers, controllers, and in electronics projects where adjustment must be made easily by hand and the potentiometer position should be visible at a glance.
The knob measures 15 x 17 mm and is made of plastic. The shaft diameter it is designed for is 6 mm, a common size for panel-mounted rotary potentiometers.
Among its main features are the black body with a ribbed side surface, which provides a secure grip when turning, the blue top section, and the blue indicator that shows the adjustment position. The knob is a passive mechanical accessory and does not require power.
The knob fits rotary potentiometers with a 6 mm shaft diameter and can be used for new projects or to replace damaged knobs.
Specifications:
Product type: Rotary knob for potentiometer
Material: Plastic
Potentiometer shaft diameter: 6 mm
Color: Blue
Dimensions: 15 x 17 mm
Use:
Before installation, check that the potentiometer shaft has a diameter of 6 mm.
Turn the potentiometer shaft to the desired end position, for example minimum, then align the knob indicator with the corresponding mark on the panel.
Push the knob onto the shaft until it reaches the desired position, without applying excessive force.
Do not force the knob onto a shaft with a different diameter and do not turn the shaft beyond its mechanical limits.
Leave a small gap between the knob and the panel so that the knob can rotate freely without rubbing.
To remove it, pull the knob straight up, without rotating it past the end of the potentiometer travel.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
