QAV250 Drone Frame, Carbon Fiber

In Stoc

Lightweight and very strong frame for 250mm racing drone, made entirely of carbon fiber for rigidity and durability. Includes rubber shock absorbers to reduce vibrations and aluminum alloy spacers, robust and lightweight, weighing only 140g, ideal for agile setups with 5x3 or 6045 propellers and 1804-2204Kv motors.

23.76 €

Brushless ESC, HobbyWing QuicRun, 30A, WP-16BL30,2-3S

In Stoc

Compact sensorless brushless ESC for 1/10-1/12 RC radio models, offers smooth and powerful control on 2-3S, with a waterproof and dustproof housing for running in any conditions. Includes adjustable proportional braking, multi-stage configurable acceleration and protections against undervoltage, overheating and signal loss. Quick programming from the button or with LED Program Card. ON OFF button and BEC 6V for RX and servo.

53.61 €

3-axis FPV gimbal, C-20T, for DJI O3

Last items in stock

3-axis gimbal for DJI O3, provides precise and smooth stabilization for FPV flight, RC airplanes or RC cars on rough terrain, with great freedom of pitch, roll and yaw movement for cinematic shots and cockpit effect. Anti-vibration mount reduces shaking for clearer image, PWM or UART control and head tracking support with compatible goggles, vertical or inverted mounting for easy integration.

249.24 €

DJI O4 Air, FPV, 1-3S unit

Last items in stock

Digital system for FPV HD video transmission on drones under 2 inches, ultralight 8.2 g. Offers 4K/60fps recording with 23 GB internal storage, 1080p live up to 100 fps, low latency down to 20 ms in Racing mode and transmission range up to 10 km. Compatible with DJI Goggles 3, N3, 2 and Integra, plus DJI FPV Remote Controller 2 and 3.

199.23 €

Brushless motor EMAX ECOII 2814, 730KV, 3-6S

In Stoc

Ideal for FPV drones and aerial platforms that require high traction, this 2814 730KV brushless motor offers efficient power on 3-6S, low idle current for better autonomy, supports peaks up to 50A, comes with 4mm bearings and 18AWG cables for cooling and durability, compatible with 9-10 inch propellers for fine tuning between consumption and force.

47.94 €

Brushless ESC with potentiometer, BLDC, 7-24V, 300W, sensorless

In Stoc

Compact controller for BLDC motors without Hall sensors, with fast speed adjustment from integrated potentiometer or PLC analog signal 0-5V. Operates at 7-24V DC and delivers up to 300W for industrial and DIY applications. Memorizes speed setting after power off and automatically reduces power upon overheating, with motor stall protection.

16.93 €

Set of 4 foam wheels, RC, 67x26, ET3

In Stoc

Set of 4 soft foam wheels for 1:10 on-road RC cars, providing excellent grip and better control on hard surfaces for smooth and stable driving. Durable plastic rims increase durability, foam tires ensure low wear, quick mounting on 12 mm hex, dimensions 67x26 mm with 3.9 mm axle, compatible with model 23001.

9.37 €

Power distribution board, Matek, with 5V and 12V BEC

In Stoc

Power distribution board for FPV drones and RC projects, with 4-layer PCB and 2oz copper for low loss and stable connections. It has dual terminals for soldering ESCs and battery, efficient DC/DC regulator with TVS protection, plus 5V and 12V stabilized BEC outputs for camera and VTX, with status LEDs and quick configuration via solder bridges.

9.87 €

540 Brushed Motor, 21T, 4 Poles, Snow Panther, Hi-Torque, 3S

In Stoc

540 brushless motor for 1/10 RC cars, ideal for high torque and precise control on the track. 4-pole 21T design for constant acceleration and response, CNC aluminum housing for efficient cooling, ball bearings for smooth operation and long life. Compatible with brushed ESC and up to 3S power supply for high power, waterproof for outdoor use.

31.95 €

Brushless motor Surpass Hobby C3530, 1700KV, 7-15V, 35A

In Stoc

1700KV brushless motor for RC radio models, ideal as propulsion for radio-controlled cars and 3D printed 3DSets, operates at 7-15V and delivers constant power up to 35A. Waterproof construction and CNC aluminum housing with cooling fins increase durability and heat dissipation, balanced rotor and ABEC5 bearings ensure smooth speeds and reliability, gold-plated 3.5 mm connectors provide secure contact.

31.88 €

ESC 30A bidirectional, Brushed, FRB functions, 4.8–8.4V

In Stoc

30A bidirectional speed controller for brushed motors, ideal for RC cars and boats, robots or DIY projects, offers forward, reverse, brake modes for precise control and fast response. Operates at 4.8–8.4V with 2S LiPo or 4–7 NiCd cells, supports 30A forward 20A reverse and 40A peak, compatible with 130 180 260 280 380 motors.

4.91 €

Receiver BS6, FlySky RC, RX, 6 channels

In Stoc

The FlySky 6-channel receiver offers stable and precise control for RC models, with an integrated gyro that can be activated from the transmitter for skid correction and smoother flying. The ultra-compact design and low weight save space in small chassis, and AFHDS 2A technology ensures reliable 2.4 GHz connection, with wide compatibility with FlySky transmitters.

44.48 €

RC FlySky FS-GT5, 6-channel, 2.4GHz, with BS6 Rx

FlySky RC radio control, FS-GT5, 6 channels, 2.4GHz, with BS6 Rx

In Stoc

6-channel 2.4GHz radio control with BS6 receiver included, provides precise and stable control for cars, boats and other RC models thanks to AFHDS 2A technology. Includes fail-safe for signal loss safety, ABS for more controlled braking, CRAWL and SVC modes with integrated gyroscope for increased stability. Memorizes up to 20 models for quick settings.

119.10 €

Set Anvelope AT pentru RC Crawler 1/10, 96mm

AT Tire Set for RC Crawler 1/10, 96mm

In Stoc

Soft rubber AT tires with removable foam inserts for 1/10 RC Crawler, provide high grip on varied terrain and a realistic look. The narrow profile with aggressive studs increases traction on obstacles, and the foam with serrations on the inside reduces slippage on the rim. Compatible with 3DSets models, diameter 96mm.

37.46 €

Pair of banana connectors, 3.5mm , Gold Plated

In Stoc

Gold-plated 3.5mm banana plugs for secure and efficient connections between battery, ESC and motor in RC applications. The gold layer provides high conductivity and low resistance to current, supporting up to 50A continuous. Compatible with up to 12AWG wire and easy to solder, the set includes male and female for quick and reliable connection.

0.44 €

HSP 1-10 Shock Absorber Set, 108mm, Aluminum

In Stoc

Set of 2 aluminum alloy shock absorbers for HSP 1/10 RC models, designed for better stability and effective shock absorption on rough terrain. They have a total length of 108 mm, a diameter of 17 mm and metal mounting lugs, being compatible with HSP 94111, 94110PRO, 94108, 94188 and Rancher 3DSETS.

6.58 €

Video switch module, 3 channels, PV3IN1, 5V, analog

In Stoc

3-channel video switch for analog FPV systems, allows connecting three cameras to a single VTX and quickly switching between sources directly from the radio control. It operates at 4.8-6V, switching is done via PWM on proportional channel or 3-position switch, offers stable signal through high-speed switching chip, is compact and easy to mount on drone or aircraft model.

7.33 €

Flight controller APM2.8, with compass, Ardupilot

Out-of-Stock

APM2.8 flight controller, with compass, Ardupilot

Out-of-Stock

Flight controller for FPV drones and RC platforms, ideal for multicopters and autonomous aircraft models, ArduPilot and Arduino compatible for flexible configuration. Includes compass for precise navigation and supports connection of a Neo M8N GPS. Integrated 3-axis sensors with barometer for stability and fine control, 4 MB Dataflash for automatic flight logging.

93.05 €

Active Buzzer Module with LED, for PixHawk PX4, alarm, 3.3V

In Stoc

The alarm module for Pixhawk PX4 with active buzzer and red LED, provides a loud audible warning and visual signal for low battery, failsafe or signal loss, helping to quickly locate the drone after an uncontrolled landing. It is powered by 3.3V, has a manual stop button, is compact and lightweight, and connects easily through the Buzzer and Switch interfaces.

5.83 €

Drone Frame F550, ATF, Hexacopter

In Stoc

ATF type frame kit for building a custom hexacopter, suitable for hobby, educational projects and testing. Includes durable plastic arms with landing legs for stability, two fiberglass PCB boards with pads for direct connection that simplifies wiring, compact modular design for quick assembly and easy maintenance.

47.82 €

Out-of-Stock

Hexacopter X600-X6 drone frame, carbon fiber, 600mm

Out-of-Stock

600mm hexacopter frame, lightweight and rigid, ideal for stable flight and aerial filming with gimbal arm. Fiberglass center plate balances strength with low weight, carbon fiber arms and landing gear increase rigidity, supports propellers up to 11 inches, includes complete mounting accessories, gimbal plate, battery holder and controller shock absorber.

99.00 €

FlySky FS-i6 transmitter and FS-iA6 receiver

FlySky FS-i6 radio control, FS-iA6 receiver, 6 channels, 2.4GHz, AFHDS 2A

In Stoc

Complete 6-channel RC control set, ideal for drones, helicopters and airplanes. 2.4GHz AFHDS 2A technology ensures stable signal and interference resistance, for fast response and precise control. The illuminated LCD screen simplifies real-time settings, and the high-resolution sticks provide fine adjustments. The included receiver is compact and lightweight, suitable for projects where weight and reliability matter.

80.88 €

Nexus Omnidirectional Wheel, 100mm, 18 Rollers

In Stoc

Ideal for robotic platforms that require 360-degree movement, allowing lateral movement and rotation without changing orientation. The double construction with 18 rollers provides stability and even load distribution, a durable nylon body, and rubber rollers for good grip. The brass sleeve bearings ensure smooth and durable rolling, supporting up to 20 kg at only 295 g.

38.29 €

T-Plug (Deans) Connectors, Male-Female, with 16AWG Cables, 60A

In Stoc

Male-female set for RC power supply and drones, with pre-mounted 16AWG cables of 15 cm, ready for installation. Supports up to 60A for high-power applications, the gold-plated brass contacts offer high conductivity and low losses, and the T design ensures a firm coupling and stable connection with compatible LiPo batteries and ESCs.

1.99 €

XT60 connector to female T

In Stoc

Allows quick conversion between XT60 and T-Plug connectors to connect a battery with XT60 to an ESC or charger with T-Plug, without modifications or soldering. Robust construction made of plastic and metal with good conductivity, firm contact, and reduced energy loss. Compact design, easy to integrate into RC configurations and power systems.

1.73 €

Serial Data Recording Module, microSD, ATmega328, Blackbox, 3-12V

In Stoc

Compact data logging module on microSD card, ideal for sensor logging and Blackbox on drones or embedded systems. Based on ATmega328 at 16 MHz, communicates via UART TTL with configurable speeds from 2400-115200 bps set in CONFIG.TXT, operates at 3-12 V with low power consumption for battery operation, supports cards up to 64GB FAT16/FAT32, and provides status LEDs for writing.

5.53 €

Ground RX FPV Module, Fiber Optic, 4-6S

Last items in stock

Optical receiver for the ground station, ideal for FPV applications where you need a stable video link and control, immune to interference. It works on 4-6S with XT60 power supply, offers AV out for monitor or goggles, UART RX TX interface for integration with the flight controller and dedicated port for optical fiber. Supports Wire Mode for direct CRSF connection and Wireless Mode for integration with radio receiver.

323.58 €

Fiber Optic FPV Kit, 3KM, with Sky TX module

Last items in stock

FPV transmission system via optical fiber for stable and secure connection up to 3 km, ideal in areas with RF interference, tunnels or industrial environments. Includes Sky TX module for drone and ABS deployment box, simultaneously transmits PAL NTSC video and commands via UART, TTL ELRS SBUS compatible, ultra-thin 0.5 mm fiber resistant to bending.

509.39 €

MATEKSYS M10Q-5883 GPS + Compass module 5V

GPS and Compass module, MATEKSYS M10Q-5883, Drone FPV, 5V

In Stoc

Compact module for FPV drones and DIY projects, offers fast and stable positioning with simultaneous GPS, GLONASS, Galileo and BeiDou reception, up to 5Hz update via UBX for better response in flight, integrated QMC5883L compass on I2C for precise orientation, PPS LED easily indicates 3D fix status, includes 15x15 mm patch antenna for easy mounting.

89.68 €

FC stack with ESC SpeedyBee, F405 V5, 30x30, OX32, 55A

Last items in stock

FPV drone stack with precise control and fast motor response, combining the FC F405 V5 and a 32-bit 4-in-1 55A ESC with OX32 firmware and telemetry. It allows configuration and firmware updates directly from your phone via SpeedyBee Wireless Tuning 2.0, features a built-in 16MB blackbox and barometer, and is compatible with analog and digital FPV systems DJI, Walksnail, and HDZero.

171.30 €

Rubber wheel FCL-3, 31x16x18mm

In Stoc

Polymer rubber wheel for industrial and robotic applications, ensures smooth and stable rolling with reduced vibrations, offers very good grip on various surfaces including glass, is resistant to wear, oil and heat, high elasticity and 70-98 Shore A hardness support constant traction in operation.

1.47 €

FrSky Antenna, Dipole T, 868MHz, EU LBT, Ipex4

In Stoc

T-dipole antenna for upgrading FrSky R9 Mini and R9 MM receivers, improves reception and link stability for long range flights. Works in the 868 MHz EU LBT band, offers better coverage through the T-configuration, and the Ipex4 connector ensures secure connection and reduced signal loss. Compact design, easy to integrate on small drones.

12.71 €

Oil Shock Absorber Set, 52mm, Aluminum

In Stoc

Set of 2 aluminum alloy oil shock absorbers for 1:10 RC models, designed for better stability and efficient shock absorption on rough terrain. Length 52mm between holes, 16mm body, thread for hardness adjustment, metal ears with controlled play for secure mounting and easy flexing.

12.69 €

Drone motor 2207, XING-E Pro, 1800KV

In Stoc

1800KV FPV motor for 3-6S setups, provides strong traction and fast response for freestyle or racing. 5mm steel shaft and NSK bearings increase shock resistance and lifespan, N52H magnets maintain performance at high temperatures, 16x16 mm mounting ensures quick mounting on most frames.

44.07 €

Foam model airplane, FX620, with remote control

In Stoc

The EPP and ABS foam model airplane offers stable flight and easy control for beginners, with a realistic SU-35 design and LEDs for visibility. The two motors ensure precise left and right maneuvers, the wheels allow easy takeoff from the ground, and the 2.4GHz remote control maintains fast response and good control range. 12–15 minutes of autonomy with quick charging.

29.46 €

FPV Video Transmitter, VTX, 5.8GHz, 64CH, IRC Tramp, 1.6W, 7-36V

In Stoc

5.8GHz analog VTX for FPV flight with stable transmission over long distances, 64 channels and adjustable power 25mW-1.6W for racing, freestyle or long-range. Supports IRC Tramp control from OSD via BetaFlight INAV Ardupilot, accepts wide power supply 7-36V, includes microphone and thermal protection, MMCX connector for antenna and standard 30.5x30.5.

63.24 €

RunCam Nano 4 FPV Camera, 800TVL CMOS 1/3", 2.1mm Lens, 155° FOV, 3.3–5.5V

In Stoc

Ultralight FPV micro camera for drone racing and cinewhoop, offers clear and stable image thanks to the 1/3 inch CMOS sensor and 800TVL resolution, 2.1mm lens with FOV 155 ensures wide visibility during flight, quickly adapts to light changes through D-WDR and AGC, flexible 3.3–5.5V power supply for easy integration with most VTX and FC.

39.28 €

Out-of-Stock

FPV receiver, OTG, Skydroid 5.8GHz, 150CH, True Diversity UVC, MicroUSB

Out-of-Stock

Compact analog FPV receiver for live viewing on Android phone or tablet via OTG, with 150 5.8GHz channels and auto-scan for fast locking on the strongest signal. True Diversity automatically switches between two antennas for stable reception, and UVC output provides smooth 640x480 image at 30fps. Also works on PC via USB, includes MicroUSB and Type-C OTG cables and 2 antennas.

74.52 €

Receiver RadioMaster, R81 mini, 8CH, FrSky D8

In Stoc

Ultra-compact receiver for FPV drones and small RC models, offers 8 channels and FrSky D8 compatibility for stable control over 1 km. SBUS output ensures fast response, RSSI support allows real-time signal monitoring, and the 17x11 mm size and 2 g weight facilitate integration into compact builds.

18.59 €

Pixhawk 2.4.8 package, 32bit, with GPS M8N

In Stoc

Complete set for autonomous drone control, compatible with official ArduPilot and PX4 firmware, with 32bit ARM Cortex-M4 processor for fast and stable response, 14 PWM outputs and UART I2C SPI CAN interfaces for flexible integration. Includes M8N GPS for precise positioning, microSD for logs, buzzer, PPM encoder, I2C splitter, cables and stop button.

217.95 €

TT 410 41mm wheel

In Stoc

TT gear wheel, ideal for robotics projects and compact mechanisms, quickly mounts on classic TT gear or directly on 3mm shaft. It has an outer diameter of 41mm for grip and stability, a 3mm center hole for easy compatibility, lightweight construction for efficiency, secure mounting and smooth operation.

0.36 €

Drone frame kit, ATF, 4 axes, F450

In Stoc

ATF F450 quad drone frame, ideal for DIY projects and test rigs. Lightweight 280g construction, plastic arms with landing pads, fiberglass PCB boards with pads for connecting ESCs, 450mm wheelbase for stability and easy mounting of 16 or 19mm motors. Includes 2 PCB boards, 4 legs and screws.

19.51 €

Rubber wheel, 65mm, TT compatible, white

In Stoc

The soft rubber plastic wheel for robotics offers superior grip over standard yellow wheels and improves stability and traction on various surfaces. It is an easy upgrade, compatible with the yellow motor via TT connector, has a diameter of 65mm, a width of 16mm and a white finish for clean integration into projects.

1.60 €

Omnidirectional wheel, Mecanum, Right, 48mm

In Stoc

Allows the robot to move forward, backward and sideways, ideal for agile mobile platforms. Free-spinning diagonal rollers ensure smooth maneuverability and quick changes of direction. Diameter 48mm, thickness 25mm, TT coupling with internal diameter 5.8mm compatible with TT motor shaft, Right version for correct assembly in Mecanum set.

5.35 €

Omnidirectional wheel, Mecanum, Left, 48mm

In Stoc

It provides the robot with omnidirectional movement, including sideways, thanks to the freely rotating diagonally arranged rollers. 48mm diameter and 25mm thickness for good clearance and stability, TT coupling with 5.8mm internal diameter compatible with TT motor shaft, left-side mounting option, ideal for mobile platforms and DIY chassis.

5.35 €

65mm wheel with rubber

In Stoc

Ideal for DIY projects, robots, carts or spindle mechanisms, the plastic wheel with soft rubber offers smooth rolling and good grip on various surfaces. It has a total diameter of 65mm and a width of 26mm for stability, a visible 4.3mm hole for the spindle, and an M8 hexagonal cutout on the inside for secure fixation and quick assembly.

3.23 €

Drone propeller set 75mm, shaft 1mm, 8520

In Stoc

Pair of propellers for drones with 8520 motor, ideal for quick replacement and restoring stability in flight. 75mm diameter for efficient traction, compatible with 1mm shaft, includes left and right propellers for correct assembly, lightweight construction for good response and low consumption.

1.68 €

Drones and Radiomodeling

Subcategories