Electronics

Drone Electronics

ESC Motor Controller 30A
ESC Motor Controller 30A
In Stoc
30A ESC controller for brushless motors, ideal for drones and other RC projects, provides stable speed control in CW or CCW direction. Includes BEC 5V 1.5A to power the electronics, works with 2-3 cell batteries and has cut off protection at 4V. Compact format 57 x 25 x 8 mm and low weight of 27 g for easy integration.
43.10 RON
ESC Distribution Board
ESC Distribution Board
In Stoc
The ESC distribution board simplifies power and wiring, allowing multiple ESC controllers to be connected to a single source. It provides 8 power outputs, includes a battery connector in the package, helps organize the installation and reduces wire length, ideal for RC assemblies and electronic applications where stability and order of connections matter.
12.38 RON
Power FPV filter, video, LC, 2A
Power FPV filter, video, LC, 2A
In Stoc
LC filter for FPV power and video, effectively reduces noise and lines in the image caused by ripple on DC voltage. Operates up to 16VDC and 2A, uses high value inductors and capacitors for stable filtering. Black housing, compact 35 x 11 x 10mm and 14g, ideal for RC airplane, multicopter and quadcopter.
29.22 RON
ESC BLHeli, 30A, with UBEC, for radio models and drones, 2-4S
ESC BLHeli, 30A, with UBEC, for radio models and drones, 2-4S, 16.8V
In Stoc
Electronic speed controller for brushless motors, ideal for quadcopters, fixed wings and FPV drones, offers 30A continuous and up to 40A peak for safe accelerations. BLHeli firmware ensures fast response and smooth control, and UBEC 5V 3A stably supplies the model's electronics. Compatible with 2-4S LiPo, programmable via FC or card.
92.09 RON
Power distribution module for APM, with BEC 5.3V, XT60, 30V, 90A
Power module for APM, with BEC 5.3V, XT60, 30V, 90A
In Stoc
Provides stable and clean power for APM and Pixhawk directly from LiPo, while providing real-time voltage and current measurement via 6-pin Molex cable connected to PM port. Includes 5.3V up to 3A BEC for controller and accessories, XT60 connector, support up to 30V and 90A current sensor, compact and lightweight for quick installation.
43.31 RON
Holybro radio telemetry set, 433mhz, 100mW
Holybro radio telemetry set, 433mhz, 100mW
In Stoc
433MHz, 100mW radio telemetry set, for stable bidirectional communication between the drone and the ground station, plug and play compatible with Pixhawk Standard and other controllers. Runs SiK open source firmware optimized for MAVLink, easily integrates with Mission Planner, Ardupilot, QGroundControl and PX4, offers full duplex link with FHSS and error correction, with a range of over 300 m out of the box.
679.22 RON
Pair of banana connectors, 3.5mm, Gold Plated
Pair of banana connectors, 3.5mm , Gold Plated
In Stoc
Gold-plated 3.5mm banana plugs for secure and efficient connections between battery, ESC and motor in RC applications. The gold layer provides high conductivity and low resistance to current, supporting up to 50A continuous. Compatible with up to 12AWG wire and easy to solder, the set includes male and female for quick and reliable connection.
2.20 RON
Power distribution board, Matek, with 5V and 12V BEC
Power distribution board, Matek, with 5V and 12V BEC
In Stoc
Power distribution board for FPV drones and RC projects, with 4-layer PCB and 2oz copper for low loss and stable connections. It has dual terminals for soldering ESCs and battery, efficient DC/DC regulator with TVS protection, plus 5V and 12V stabilized BEC outputs for camera and VTX, with status LEDs and quick configuration via solder bridges.
49.86 RON
Active Buzzer Module with LED, for PixHawk PX4, alarm, 3.3V
Active Buzzer Module with LED, for PixHawk PX4, alarm, 3.3V
In Stoc
The alarm module for Pixhawk PX4 with active buzzer and red LED, provides a loud audible warning and visual signal for low battery, failsafe or signal loss, helping to quickly locate the drone after an uncontrolled landing. It is powered by 3.3V, has a manual stop button, is compact and lightweight, and connects easily through the Buzzer and Switch interfaces.
29.43 RON
ESC 30A bidirectional, Brushed, FRB functions, 4.8–8.4V
Out-of-Stock
ESC 30A bidirectional, Brushed, FRB functions, 4.8–8.4V
Out-of-Stock
30A bidirectional speed controller for brushed motors, ideal for RC cars and boats, robots or DIY projects, offers forward, reverse, brake modes for precise control and fast response. Operates at 4.8–8.4V with 2S LiPo or 4–7 NiCd cells, supports 30A forward 20A reverse and 40A peak, compatible with 130 180 260 280 380 motors.
24.82 RON
FC stack with ESC SpeedyBee, F405 V5, 30x30, OX32, 55A
FC stack with ESC SpeedyBee, F405 V5, 30x30, OX32, 55A
Last items in stock
FPV drone stack with precise control and fast motor response, combining the FC F405 V5 and a 32-bit 4-in-1 55A ESC with OX32 firmware and telemetry. It allows configuration and firmware updates directly from your phone via SpeedyBee Wireless Tuning 2.0, features a built-in 16MB blackbox and barometer, and is compatible with analog and digital FPV systems DJI, Walksnail, and HDZero.
865.14 RON
MATEKSYS M10Q-5883 GPS + Compass module 5V
GPS and Compass module, MATEKSYS M10Q-5883, Drone FPV, 5V
In Stoc
Compact module for FPV drones and DIY projects, offers fast and stable positioning with simultaneous GPS, GLONASS, Galileo and BeiDou reception, up to 5Hz update via UBX for better response in flight, integrated QMC5883L compass on I2C for precise orientation, PPS LED easily indicates 3D fix status, includes 15x15 mm patch antenna for easy mounting.
452.93 RON
Ground RX FPV Fiber Optic Receiver 4-6S
Ground RX FPV Module, Fiber Optic, 4-6S
Last items in stock
Optical receiver for the ground station, ideal for FPV applications where you need a stable video link and control, immune to interference. It works on 4-6S with XT60 power supply, offers AV out for monitor or goggles, UART RX TX interface for integration with the flight controller and dedicated port for optical fiber. Supports Wire Mode for direct CRSF connection and Wireless Mode for integration with radio receiver.
1,634.26 RON
XT60 connector to female T
XT60 connector to female T
In Stoc
Allows quick conversion between XT60 and T-Plug connectors to connect a battery with XT60 to an ESC or charger with T-Plug, without modifications or soldering. Robust construction made of plastic and metal with good conductivity, firm contact, and reduced energy loss. Compact design, easy to integrate into RC configurations and power systems.
8.72 RON
Converter module SPP, PPM, PWM, SBUS, 8 channels, 3.3-20V
Converter module SPP, PPM, PWM, SBUS, 8 channels, 3.3-20V
In Stoc
8-channel signal converter for quick integration between receivers and controllers, automatically converts SPP PPM PWM and SBUS without manual settings. Operates on wide 3.3-20V power supply, 32-bit microcontroller for stability and fast response, simultaneous conversions between formats, status LEDs for immediate signal identification and easy troubleshooting.
73.36 RON
T-Plug (Deans) Connectors, Male-Female, with 16AWG Cables, 60A
T-Plug (Deans) Connectors, Male-Female, with 16AWG Cables, 60A
In Stoc
Male-female set for RC power supply and drones, with pre-mounted 16AWG cables of 15 cm, ready for installation. Supports up to 60A for high-power applications, the gold-plated brass contacts offer high conductivity and low losses, and the T design ensures a firm coupling and stable connection with compatible LiPo batteries and ESCs.
10.07 RON
Video switch module, 3 channels, PV3IN1, 5V, analog
Video switch module, 3 channels, PV3IN1, 5V, analog
In Stoc
3-channel video switch for analog FPV systems, allows connecting three cameras to a single VTX and quickly switching between sources directly from the radio control. It operates at 4.8-6V, switching is done via PWM on proportional channel or 3-position switch, offers stable signal through high-speed switching chip, is compact and easy to mount on drone or aircraft model.
37.03 RON
Original NEO-M8N GPS module with compass for Pixhawk
Original NEO-M8N GPS module with compass for Pixhawk
In Stoc
The original NEO-M8N GPS module with integrated compass for Pixhawk and PX4, offers fast satellite fix and precise navigation for stable flights. It comes pre-configured and tested from the factory, ready to use immediately, includes SAW filter and active interference detection for cleaner signal in difficult environments, and the compact design with self-adhesive sticker allows for quick and secure mounting.
374.27 RON