Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Current sensor, analog acquisition, 2 channels, 0-20mA, 4-20mA, 8-25V, RS485
2-channel analog acquisition module for measuring 0-20mA and 4-20mA current signals, ideal for automation and instrumentation. Communicates via RS485 with Modbus RTU support for quick integration into PLC or SCADA. Operates at 8-25V DC, offers good resolution and typical 1% accuracy, in a compact, easy-to-mount format.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Analog current acquisition module 4-20mA and 0-20mA, N46IB02, with RS485 communication and Modbus RTU support, designed for simple and efficient integration in automation, instrumentation and measurement systems. The module is specially optimized for the standard 0-20mA and 4-20mA signals frequently used in automation and instrumentation.
In the DOWNLOAD section you can find more information about how to use this product.
It supports MODBUS RTU commands such as function codes 03 and 06, facilitating integration in control and automation systems.
The ID of the slave device can be set by commands, with a maximum number of 247, facilitating addressing and management in Modbus networks.
The MODBUS Command Module requires the correct configuration of the slave ID for efficient communications.
The specific limitations of this module are the fact that O1 has a minimum output voltage of 0.05V and O2 of 0.1V, as well as the presence of a high pulse of 10-20ms at the time of power supply
Specifications:
Operating Voltage: DC 8-25V
Operating Current: 12-13mA
Support MODBUS RTU commands: Function codes 03 and 06
Voltage Resolution: 0.01V
Output Accuracy: 1%; possibility of calibration for errors >1%
Expansion Capacity: Supports up to 247 devices in parallel under MODBUS command
Dimensions: 45 x 35 x 15mm
-Channel 1 (O1):
Output Voltage: 0-5V
Maximum Output Current: 20mA
Accuracy: 1% at 1-5V, <1V shows a 50Hz/40mV ripple
-Channel 2 (O2):
Output Voltage: 0-10V
Maximum Output Current: 20mA
Accuracy: 1% at 2-10V, <2V shows a 50Hz/80mV ripple
Login:
Connection to RS485:
Slave connection:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
