Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Digital tachometer without contact, 99.999RPM, DT2234C
Non-contact digital tachometer for quick measurement of engine and shaft speed, uses reflective tape applied to the shaft and reads from 50 to 500 mm. Displays up to 99,999 RPM on a clear LCD screen, with memory for the last, minimum and maximum value. The set includes a case, instructions and reflective tapes, 9V power supply.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Digital photo tachometer that uses a reflective surface glued to the motor shaft to detect and display the number of revolutions per minute.
The set includes the cover, instructions and reflective strips.
CAREFUL! THE TACHOMETER HAS NO POLARITY PROTECTION! WRONG CONNECTION OF THE BATTERY, EVEN FOR A SHORT TIME, WILL LEAD TO IT FAILURE!
MAKE SURE OF THE CORRECT POLARITY OF THE BATTERY!
Specifications:
Supply voltage: 9V, 9V battery is NOT included
Model: DT2234C
Display: 18mm LCD
Measuring range: up to 99,999 rpm
Resolution: 0.1Rpm (up to 999.9rpm), 1Rpm (over 1000rpm)
Distance: 50 - 500mm
Memory: last value, maximum value and minimum value
Dimensions mm: 130 x 70 x 29mm
Weight: 160g
Warranty: 24 months
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
...poate nu l-am folosit suficient incat sa ma obisnuiesc cu el. daca efectuez citiri repetate pe acelas ax fara a schimba turatia, de fiecare data imi afisaza alte valori....zeci/sute de rotatii + ori- In rest multumit!
Bun ca sa indice bine trebuie sinut sub 20cm distanaa si indica bine. aant multumit de el.
