Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Amplifier module XH-M573, TPA3116D2, 100W, 2.1 channels
2.1 digital amplifier on TPA3116D2, ideal for compact audio projects, powers two stereo speakers and a subwoofer for powerful and balanced sound. It has volume, bass and stereo level adjustment, operates at 10-18V DC, offers audio input via AUX 3.5 mm or 3-pin connector, compatible with 4-8 ohm speakers.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
XH-M573 amplifier module using TPA3116D2 IC, This is a 2.1 digital amplifier, designed to provide an audio solution with a 2.1 channel configuration, capable of powering two stereo speakers with 80W each and a subwoofer with 100W, thus ensuring a deep and well-balanced audio experience. This amplifier module features total volume, bass and stereo adjustment. It can be powered by a wide range of DC voltages, between 12 and 18VDC (recommended under 18V, 3A) and provides audio input on 3.5mm AUX jack or 3-pin XH2.54 mm connector (connected in parallel with the 3.5mm jack).
A cylindrical connector with dimensions of 5.5x2.1 mm is used for power supply.
Specifications:
Supply voltage: 10-18VDC
Power plug: 5.5x2.1mm
Channels: 2.1
Output power: 80W+80W (stereo) + 100W (subwoofer)
Compatible speakers: 4-8ohm
IC: TDA3116D2
Frequency response: 14-100KHz
Switching frequency: 1.2MHz
Signal to noise ratio: 100db
Dimensions: 28.5 x 19.5 x 17mm
Use:
Use a proper power supply, DC12-18V and above 3A, to ensure optimal amplifier performance.
Connect the speakers to the stereo outputs and the subwoofer to the dedicated output, making sure to respect the recommended impedance of 4-8ohm.
Use a wired connection (3.5mm AUX-IN jack or 3-pin connector) to connect the amplifier to your audio source, such as an audio player, smartphone, tablet or Bluetooth module, via a suitable cable. The input has 3 poles, common, L channel and R channel.
Adjust the volume and other settings directly from the signal source followed by stereo, bass and total volume control, adjustable from the potentiometers available on the board.
Make sure the amplifier is used in a well-ventilated area to avoid overheating. Do not cover the device and maintain adequate space around it for air circulation. When installing it, make sure that it does not overheat. If it overheats, it will burn out.
- tension
- AD
- Power
- Over 20W
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
