Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
2x100W TDA7498 amplifier module
Dual BTL class D amplifier for home theater and active speakers, delivers up to 2x100W with high efficiency and low heat. Operates at 15-34VDC, recommended 24V, has 4 selectable gain stages, short-circuit and overtemperature protections, plus Normal, Stand-by and Mute modes for easy operation control.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The TDA7498 module is a class D amplifier, with dual-BTL 100W+100W output, single power supply, designed for home theater and active speaker applications.
Important: Using the amplifier with 4-ohm speakers can cause it to burn out. If you still want to use 4-ohm speakers, use the lowest possible voltage and be careful about the amplifier overheating. If necessary, use active cooling by applying a fan to the heatsink. Burning the module by using speakers with a value other than 8 ohms voids the warranty.
Specifications:
Amplifier chip: TDA7498
Output power: 100W + 100W (Vcc = 36 V, RL = 6Ω, THD: 10%)
Output power: 80W + 80W (Vcc = 34 V, RL = 8Ω, THD: 10%)
Power supply voltage: 15 - 34VDC (recommended 24V)
Speaker impedance: 8 ohms recommended (using 4-ohm speakers can cause amplifier burnout)
4 fixed gain values: 25.6dB, 31.6dB, 35.1dB, and 37.6dB
Protection: short circuit and temperature
Functions: Normal, Stand-by, and Mute. Set by shorting the pins shown in the picture below
Standby: circuits off, low power consumption mode
Mute: all signals connected to ground
Normal
Alternative audio input with 3 wires (3 pin audio input): Middle GND, outer pins L and R
- Type
- Amplifier
- tension
- AD
- Power
- Over 20W
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (11) - Review moderation
Necesita ventilator se ancalzeste an sarcina pe 4ohm 100w nu si are
Alimentat cu 24 dc merge foarte bine sunet clar
primul kit a fost defect.....dupa ce am primit altul functional testat la 30v 10A pe boxe sony rg660 6 ohm se aude incredibil pentru clasa D functioneaza decent si pe alimentator de 19v 4-5A de laptop recomand racirea activa pret calitate 10/10 recomand 100/100
Sunet plin cu inalte si bass suficiente ancat sa nu ai nevoie de un corector de ton.
Pentru boxe cu impedanta de 6 ohmi este buna
