Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Waterproof temperature probe, LM35, 1 meter, original IC
The waterproof probe with the original LM35DZ sensor offers accurate temperature measurements in liquids and humid environments, has a corrosion-resistant stainless steel housing, internal sealing and heat-shrink protection on the pins to avoid short circuits. The 1 m cable allows flexible mounting, operates at 4-20 V and measures between 0 and 100 C.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The waterproof LM35 temperature probe is a practical and reliable solution for precise temperature measurement in wet environments, in applications where the sensor may come into direct contact with liquids.
Equipped with the original LM35DZ sensor, it offers a stable analog output, good response to temperature changes, and easy integration into electronic projects, industrial systems, agricultural equipment, or laboratory setups.
The design is intended for safe and durable use, featuring a stainless steel housing measuring 6 x 50 mm, good mechanical protection, corrosion resistance, internal sealing for water protection, and heat shrink tubing applied at each connection to reduce the risk of short circuits. The 1-meter cable allows flexible mounting and easy positioning at different measurement points.
The sensor generates an analog voltage proportional to the temperature.
Specifications:
Sensor: original LM35DZ
Housing material: stainless steel
Housing length: 50 mm
Housing diameter: 6 mm
Cable length: 100 cm
Supply voltage: 4V - 20V
Temperature range: 0°C to +100°C
Output type: analog
Red wire connection: VCC
Yellow wire connection: analog output signal
Black wire connection: GND
Usage:
The probe is easily connected in electronic circuits or temperature monitoring systems. The red wire connects to power supply, the black wire to ground, and the yellow wire to the analog input of the controller or reading module. It is recommended to use within the specified temperature range for accurate measurements and stable operation. For optimal results, the probe should be mounted so that the metal part is positioned directly in the measurement area, avoiding excessive cable tension or insulation damage.
Pinout:
| Wire Color | Connection | Role |
|---|---|---|
| Red | VCC | Positive power supply |
| Yellow | Analog output | Temperature signal |
| Black | GND | Ground |
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
