Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
TLE5012 magnetic encoder module, radial magnet, 3.3-5V
Contactless magnetic encoder for precise angle measurement, ideal for motors and rotation sensing projects. Offers 12-bit resolution, I2C, PWM or analog outputs for quick integration with Arduino and other boards, operates at 3.3-5V with simple adaptation. Includes radial magnet and PCB with slots for easy mounting.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The TLE5012 high-precision magnetic encoder module uses the AS5600 IC with 12-bit angle measurement capability, compatible with Arduino and other development boards. It provides a reliable, non-contact solution for precise angular position measurement, making it ideal for motors and other applications that require precise rotation detection.
The angle signal can be transmitted via the I2C bus, PWM output, or analog signal, providing flexibility in integration with various microcontrollers. Its slotted design allows compatibility with motor mounts of various sizes, facilitating mounting in various configurations.
The module is compatible with 3.3V and 5V, allowing adaptation to different platforms by modifying the resistor R6. It comes from the factory on 3.3V, meaning it has the resistor R6 soldered in. To make it compatible with 5V, the resistor R6 will be removed.
By default, clockwise rotation increases the angle value. It can be changed in the opposite direction by moving resistor R4 to R3.
It uses a 4-pin PH2.0 interface, easy to connect and integrate into existing systems.
The PCB shape allows mounting on motors of various sizes, thanks to the slotted design.
Specifications:
Operating voltage: 3.3V (default), 5V (by disconnecting R6)
Sensor type: Magnetic encoder
Resolution: 12 bits
Output modes: I2C, PWM, Analog, lIF, HSM, SPC
Default configuration: I2C (can be changed to PWM/Analog by connecting the PGO pin to ground)
Rotation direction configuration: Clockwise (default). Can be changed to counterclockwise by soldering resistor R4 to pad R3
Interface: PH2.0, 4 pins
Motor compatibility: 34mm diagonal, such as 2212 motor
Dimensions: 32 x 32mm
Use:
First, the desired operating voltage, output mode, and direction of rotation will be established, followed by modifications to the module to match the desired operating mode.
Characteristic | Default Configuration | Change Available |
Operating voltage | 3.3V (R6 soldered) | 5V (R6 removed) |
Exit mode | I2C | PWM/Analog (PGO connected to ground) |
Direction of rotation | Schedule (CW) | Counter-clockwise (CCW) – move R4 to R3 |
Dimensions:
Package contents:
1x AS5600 Magnetic Encoder Module
1x Radial magnet
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
