Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Speed and direction control module, PWM, 9-50V, 40A, 2000W
PWM controller for brushed DC motors, ideal for smooth speed control and direction change. Operates at 10-55V and supports up to 40A continuously, providing power up to 2000W. Includes potentiometer for 0-100% speed, 3-position switch for direction and stop, plus external display for clear display.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Speed and direction controller for DC motors with a voltage between 10 and 55V and a maximum power of 2000W, with display, potentiometer for speed regulation and 3-position switch for the direction of rotation (the middle position is off).
The module uses the PWM method to change the motor speed.
The display on this model is external. It can be inserted directly on the PCB after removing the pins or used as such, with wires, if it is desired to position it in a position further away from the PCB.
Important: during transport, the display wires can disconnect . These wires can be easily tangled, which leads to the damage of the display/module. Carefully check the correct order of these wires. As a help, fix the display according to the picture below, with the points down, and lead the wires one by one from the board to the display.
Specifications:
Supply voltage: 10-55VDC
Output: Motor 10-55VDC (Input voltage corresponds to output voltage)
Maximum current: 60A only in peaks
Continuous current: 40A
Maximum power: 2000W
Control: PWM
Motor type: DC with brushes
Speed range: 0 - 100%
Direction of rotation: Clockwise and Counterclockwise, selectable from the switch
Dimensions mm: 100 x 76 x 28
Login:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
