Sound playback module, Playback, with 5W amplifier, 8M memory

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

Sound playback module, Playback, with 5W amplifier, 8M memory, UART, DY-SV8F

Audio playback module for electronic and industrial projects, offers MP3/WAV playback with flexible control via UART, I/O or One-line, includes 5W class D amplifier for 4 ohm 3-5W speakers, has integrated 8MB Flash memory without SD card and allows file updating via Micro USB, includes 3.5mm audio jack output for quick connection.

Ft3,658.74 Tax included

Ft3,023.75 Tax excluded

No reviews yet

1-2 zile

Shipping by Thursday 27 August

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.

FAST DISPATCH 24H
We ship from our stock within 24H

LOYALTY POINTS
You earn points with every order, worth 5%.

The intelligent voice playback module, DY-SV8F, developed to integrate functions such as I/O subsection triggering, UART serial port control and ONE-line single serial bus control. It includes a built-in Class D 5W amplifier and can directly drive 4ohm speakers with 3-5W. It supports MP3 and WAV formats and comes with 64Bbit (8Mbyte) Flash memory, without SD CARD support .

The module allows updating audio files via USB and includes a 3.5mm audio interface, Micro USB download interface and a button module.

The speaker can be glued directly to the wood or it can be connected, if an XH2.54 female connector has been mounted beforehand, directly through the plug.

Specifications:

Supply Voltage: 5VDC

Supported formats: MP3 and WAV

Sampling Frequency: 8/11.025/12/16/22.05/24/32/44.1/48 KHz

DAC output: 24-bit, SNR 85dB

Flash Memory: 64Bbit (8Mbyte)

UART Serial Control: Playback, pause, song selection (up to 65535), volume control

Trigger I/O: 8 I/O ports for 8 songs or combinations for 255 songs

One-line control: Playback, pause, selection, volume control

Work Modes: 7 configurable modes through 3 I/O

Amplifier: 5W Class D, for speakers 4ohm 3-5W

Operating Temperature: -20℃~85℃

Humidity: 0 %-95% RH

Dimensions: 40 x 40 x 4.5mm

Instructions:

1. Connect the 4ohm 3-5W speaker to the module.

2. Connect the module to the 5V DC power supply.

3. Load the desired audio files using the Micro USB cable.

4. Use the UART or I/O port to control playback functions.

The INDEPENDENT modes only work if the name of the mp3 files is as in the table below (00001.mp3, 00002.mp3, samd).

Power through the GND next to the power supply, NOT the GND related to the buttons. The GND of the buttons does not have routes designed to cope with the 5W power to the amplifier.

The buttons have a default state of 1 (High). By putting them to ground (GND), the state of the button goes to 0 (Low). So, in the tables below, 0 corresponds to connecting the button to GND.