Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Motor speed control module, PWM, 12-40VDC, 10A, Tenstar Robot
PWM module for speed control of brushed DC motors, ideal for fine speed regulation without large torque loss. It operates at 12-40VDC, delivers up to 400W, with 8A recommended and 10A peak, has a PWM frequency of 13kHz and 10-100% potentiometer adjustment, includes fuse and connector for external potentiometer.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The rotation speed control module for DC motors, which uses the PWM method (Pulse with modulation) to work. Using the PWM method preserves the voltage and power reaching the motor, with the difference that it is delivered in pulses (from 10% to 100%), by changing the duty cycle. In this way, it will be possible to obtain a higher torque compared to the speed control method by decreasing the voltage.
It can control a motor with a maximum power of up to 400W and 10A (recommended under 8A).
The module is only compatible with brushed DC motors (it is not compatible with Brushless motors). There is no reverse polarity protection, which is why make sure the connection is correct so as not to burn the module. As a good practice, we recommend using modules with half of the specified maximum specifications.
It is recommended to monitor the temperature of the module, especially during the test phase, and to improve the cooling in case it overheats.
There is a glass fuse on the module as a measure of protection against excessive current (do not rely on the fact that the fuse will save the module in case of overcurrent, using it at the limit of the specifications for a long time will cause the module to burn) and a plug XH2.54 with 3 pins that can be used as an extension for an external potentiometer.
Specifications:
Supply voltage: 12 - 40VDC
Model: CCMHC, Tenstar Robot
Controlled power: 0.01 - 400W
Controlled current: 8A (Maximum 10A in short peaks)
Standby Current: 0.02A
PWM frequency: 13KHz
PWM duty cycle: 10 - 100%, adjustable by potentiometer
Dimensions mm: 60 x 55 x 28mm
Login:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
