Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
LOra 433MHz transceiver module SX1278 5km
The SX1278 LoRa transceiver module provides reliable radio communication between two devices up to 5 km in open field, ideal for telemetry and automation. Compatible with Arduino and other development boards, it offers high sensitivity up to 139 dBm, 20 dBm transmit power and standby consumption below 200 nA. It operates at 3.3 V on the logic pins and supports LoRa and FSK modes.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The Lora SX1278 transceiver module allows radio communication between two modules over a distance of 5km in open field. Product compatible with Arduino and other development boards.
The module operates at a voltage of 3.3V on the logic pins (requires a logic level converter)
Specifications:
Frequencies: 433MHz/470MHz (Customizable 137-1020 MHz)
Sensitivity up to: 139 dBm
Maximum output power: 20dBm
Standby current: <200nA
Data transfer rate: @FSK,1.2-300kbps
@Lora TM,0.018-37.5kbps
Lora TM, FSK, GFSK and OOK Modulation mode
Input voltage: 1.8-3.7V
127 dB Dynamic Range RSSI
Packet engine up to 256 bytes with CRC
Operating temperature: -40 ~ + 85 °C
Built-in temperature sensor and low battery indicator
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Nu mi-am dat seama ca pasul este de 1mm. Asa ca a trebuit sa achizitionez si cablaj adaptor separat, motiv pentru care inca nu am testat modulul...
