Gesture proximity sensor, ambient light, APDS-9930, 3.3V
zoom_out_map
chevron_left chevron_right

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

Gesture proximity sensor, ambient light, APDS-9930, 3.3V

Module with APDS-9930 for ambient light measurement and proximity detection, ideal for Arduino projects and compatible boards, operates at 3.3V and communicates quickly via I2C, offers up to 16 bit resolution for precise readings, includes programmable threshold interrupt and low power mode for minimal consumption between measurements.

Ft811.62 Tax included

Ft670.76 Tax excluded

(5/5) out of 1 total ratings
Read the reviews
1-2 zile
check In Stoc

Shipping by Thursday 27 August

Close

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24H
We ship from our stock within 24H
LOYALTY POINTS
You earn points with every order, worth 5%.

Gesture proximity sensor, ambient light CJMCU9930 APDS 9930, compatible with Arduino and other development boards.

This sensor works at a logic voltage of 3.3V, which is why it is necessary to use a logic level converter if you use 5V microcontrollers.

This sensor can be used to detect light intensity but also proximity to objects (similar to the proximity sensor used by mobile phones).

There is the possibility to put the sensor in the Low Power state for low consumption between measurements.

This sensor works well both in well-lit environments and in dark rooms.

Specify:

Supply voltage: 2.8 - 3.3VDC

Logic voltage: 3.3V

Functions: ALS (Ambient Light Sensing), IR LED (Infrared LED) and Proximity Detector

Programmable interrupt: Yes, with high and low Threshold

Interrupt Pin: Yes

Resolution: Up to 16-Bit

Wait Timer: Programmable between 2.7ms and 8 sec

Communication: I2C

I2C frequency: Up to 400KHz

Sleep Mode current consumption: 2.2uA

Login:

VCC -> 3.3V

GND -> GND

SCL -> A5

SDA -> A4

Instructions:

Copy the library from the Download section in Documents>Arduino>libraries and try one of the two available codes.

33147

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Website: www.sigmanortec.ro

Persoana responsabila in UE:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Documentatie si siguranta:

Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].