Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Display TFT 0.96", IPS, SPI, 65K colors, LCD ST7735, 80x160, 8P
0.96 inch IPS color display module for Arduino projects and other development boards, ideal for compact interfaces with clear graphics and text. Offers 80x160 resolution with 65K colors and individually controllable RGB pixels, communicates quickly via SPI with ST7735S controller. Wide viewing angles thanks to IPS panel, backlight controllable via BLK pin, power and logic at 3.3V.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
0.96 inch IPS color display module, compatible with Arduino and other development boards. Careful! It supports voltage of 3.3V, both logic and power supply. Use a logic level converter if it is necessary to use with 5V boards.
This display communicates via SPI and the pixels are individually controllable, having a resolution of 80x160 RGB pixels. The LCD screen is TFT with realistic colors and IPS, which allows it to be viewed correctly from all angles.
It has backlight controllable through the dedicated BLK pin (Low Level is OFF).
Specifications:
Supply voltage: 3.3VDC
Logic voltage: 3.3VDC ( it is NOT compatible with 5V! Use a logic level converter )
Integrated: ST7735S
Number of pins: 8
Communication: SPI
Screen size: 0.96 inches
Resolution: 80x160 pixels
Color: RGB
Type: LCD TFT, IPS
Operating temperature: -20 - +70 degrees C, without condensation
Dimensions mm: 30 x 24mm
Login:
GND: Ground, minus
VCC: 3.3VDC, plus
SCL: SCL Pin, Serial Clock
SDA: SDA Pin, Serial Data
RES: Pin Reset
DC: Pin Data Control
CS: Chip Select
BLK: Backlight control pin
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Ecran miniatural extrem de performant, foarte luminos (IPS) usor de folosit via SPI (cu CS expus, initializare precum ST7789, SDA bidirectional - face si PixelRead cu intrerupere a transferului prin simpla pulsare a CS). Poate aduceti similare cu rezolutii mai mari (240x320).
