Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Current to voltage converter module, 0-20mA to 0-5V, LM358
Converts 0-20mA current signal into a proportional voltage 0-5V, ideal for interfacing industrial sensors with ADC inputs or microcontrollers. Uses LM358 for stable conversion, operates at 10-30V, includes potentiometer for precise output calibration, operates between -25 and 85C.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The module for converting current (IV) between 0 and 20mA to voltage between 0 and 5V. It converts a current into a proportional voltage.
For example, applying a current of 20mAh to the input will produce a voltage of 5VDC at the output, applying a current of 4mA will produce an output voltage of 1V. The potentiometer is used to adjust the output voltage.
Specifications:
Integrated: LM358
Supply voltage: 0-30V
Conversion: 0-20mAhV to 0-5VDC
Minimum current: 0mAh
Maximum current: 20mAh
Potentiometer: Output tension adjustment
Tolerance: 1-5%
Operating temperature: -25 - 85 degrees C
Dimensions mm: 29 x 25mm
Pinouts:
VDC 10 - 30V Supply
GND Ground
CIN Input current
GND Input ground
VOUT Output voltage
GND Output ground
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
