Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
GX16 8-Pin Connector Set, Male and Female, Threaded
GX16 circular connector set with 8 pins, consisting of a panel male plug and a cable female plug, suitable for detachable connections in electronic equipment and automation devices. The threaded coupling ensures a stable, vibration-resistant contact, panel mounting is made in a 15.6 mm hole, and the wires are connected by soldering.
Shipping by Thursday 12 November
Buying this product earns you 0.33 RON in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The set contains one panel-mount male plug and one cable-mount female plug from the GX16 series, with 8 pins, used for detachable electrical connections between cables and enclosures or equipment panels. The coupling is made by thread, and the contact remains secure under vibration, which is why the set suits electronic equipment, automation equipment, power supplies, connecting cables and other applications where a connection must be opened and closed repeatedly.
The connector has a metal housing and 8 contacts, with a pin diameter of approximately 1.3 mm. The panel plug is mounted in a 15.6 mm hole and secured with a nut. The wires are connected by soldering, into the contact cups.
Specifications:
Rated voltage: 125 V
Connector type: Circular, GX16, threaded
Set composition: 1 panel male plug and 1 cable female plug
Number of pins: 8
Female plug hole diameter: 15.6 mm
Contact pin diameter: approximately 1.3 mm
Contact material: Copper
Connection method: Soldering
Solder hole diameter: 0.8 mm
Layout:
| Element | Function |
|---|---|
| Panel male plug | Metal body with external thread and 8 pins, inserted into the panel hole and secured with a hexagonal nut. |
| Hexagonal nut | Tightens the panel plug onto the enclosure or panel. |
| Cable female plug | Metal body with 8 socket-type contacts, to which the cable wires are soldered and which couples over the panel plug. |
| Threaded ring with knurled surface | Screws onto the thread of the panel plug, locks the coupling and prevents accidental disconnection. |
| Contacts | 8 contacts, one for each cable wire. |
| Rear cover with screws | Closes the female plug after the wires are soldered and clamps the cable. |
Usage:
Disconnect the equipment from the power supply before working on the connections.
Drill a hole with a diameter of 15.6 mm in the panel or enclosure, then insert the male plug and secure it with the hexagonal nut.
Before soldering, pass the cable through the rear cover and through the body of the female plug.
Solder the wires into the contact cups, each to its corresponding contact, and check that no wire touches the neighbouring contact.
Choose the wire cross-section according to the consumer current and do not exceed the rated voltage of 125 V.
Assemble the body and cover of the female plug, tighten the cable clamping screws, then couple the female plug over the male plug and screw the threaded ring until it locks.
Before energising, check with a multimeter the continuity of each wire and the absence of short circuits between contacts.
For a stable connection, do not pull the cable when disconnecting, but unscrew the threaded ring and remove the plug by holding its body.
- Number of pins
- 8
- Connector type
- GX16
- Mounting hole diameter
- 15.6 mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Putin cam firav , dar destul de bun.
Calitate excelenta,pret corect si expediere rapida.
