Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Audio amplifier module, 420Wx2, HX-M252, TDA8954TH, 24VAC, Stereo HiFi, Class D
HiFi class D stereo amplifier module for power audio projects, offers 2x420W on two channels with TDA8954TH and works with 2-8 Ohm speakers. It is powered by dual AC 24-30V, has a generous radiator for efficient dissipation and screw terminals for quick connection. Recommended with preamplifier for volume and tone control.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Class D amplifier module, XH-M252 with TDA8954TH, two channels of 420W each, which supports speakers with impedance between 2 and 8 ohms.
It is recommended to use a 24VAC double loop power supply and a 300W or larger ring transformer.
It uses two surface-mounted TDA8954TH integrated circuits, with a large enough radiator to cope with the power dissipated by these integrated circuits. The board has screw terminals for connection and uses a series of 1000uF, 50V capacitors.
It is also recommended to use a tone pre-amplifier filter to be able to control the volume and the tones.
Specifications:
Supply voltage: AC dual 24 - 30V
Output power: 2x420W
Channels: 2
Integrated amplifier: TDA8954TH
Model: XH-M252
Output impedance: 2 - 8 Ohm
Dimensions mm: 107 x 93 x 30mm
- Type
- Amplifier
- tension
- NEEDLE
- Power
- Over 20W
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
