Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Shield Ramps 1.6, R6, 5 axes, 12V, 200W
The Ramps 1.6 Shield for Arduino Mega is a 5-axis control board for 3D printers or CNCs, supports 5 A4988, DRV8825 and other drivers simultaneously, provides 12V and 200W power supply with B55NF06C MOSFET up to 10A. Includes gold-plated connectors for secure contact, full heatsink for efficient dissipation and extended power up to 270W, plus a new 2-pin connector.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Ramps board version 1.6 for Arduino Mega with support for 5 motor drivers (A4988, DRV8825 and others), Gold-plated connectors for the best conductivity.
It uses Mosfet B55NF06c which can support a maximum of 10A.
The board is similar in format to the previous version, 1.5, but offers more power and better heat dissipation through the included radiator that completely covers the mosfets, being able to provide power up to 270W. It also offers a new 2-pin connector.
Specifications:
Supply voltage: 12VDC
Current rating: 10A
Motor driver support: support A4988 DRV8825 and other motor drivers (support five motor drivers simultaneously)
Power: 200W
MOS tube: B55NF06
Compatible with: MEGA development board
Version: 1.6
Dimensions mm: 101.5 x 60.5mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
