Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Power Mosfet Module, 3D Printers, 12-24V, 25A
Allows control of the 3D printer heated bed from the motherboard signal, but with a stronger external power supply, reducing the stress and temperature of the board and extending its lifespan. Operates at 12-24VDC, supports up to 25A, is compatible with PID control, compact dimensions 50x60 mm for easy installation.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
External power mosfet for 3D printers, 12VDC or 24VDC voltage, 25A maximum.
This transistor module is specially used for the heated bed of the 3D printer to power it from a more powerful external source. In this way, the bed will still receive a signal from the printer's motherboard, but it will be powered externally.
It is recommended to use an external module for the printer bed because it, being the biggest current consumer, will no longer force the motherboard, it will work at much lower temperatures, and will greatly extend its life. The module is also a must if, for a better and faster heating of the printing bed, you want to switch from 12V to 24V or increase the current. It can also be used on the extruder, although it is not a necessity, since it is not as big a consumer as the bed.
Specifications:
Input voltage: 12 - 24VDC
Maximum current: 25A (in case of overheating, requires active cooling)
PID control: Yes
Dimensions mm: 50 x 60mm
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
