Power H-bridge BTS7960 43A motor driver module
zoom_out_map
chevron_left chevron_right

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

Power H-bridge, motor driver, BTS7960, 43A

H-bridge module for controlling high-torque DC motors, ideal for Arduino and other boards, delivers up to 43A and operates at 5.5-27V. Integrates BTS7960 and 74HC244 for stable PWM control up to 25kHz, offers temperature, overcurrent and short circuit protection, and the generous heat sink ensures strong starting, acceleration and braking in demanding applications.

Ft2,907.56 Tax included

Ft2,402.95 Tax excluded

(5/5) out of 4 total ratings
Read the reviews
1-2 zile
check In Stoc

Shipping by Thursday 27 August

Close

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24H
We ship from our stock within 24H
LOYALTY POINTS
You earn points with every order, worth 5%.

Power motor driver module, H-Bridge, BTS7960, maximum current 43A, compatible with Arduino and other development boards.

It uses the BTS7960 and 74HC244 integrated circuits to form the complete H-bridge, with thermal and overcurrent protection.

The benefits of this module are the generously sized radiator and its power, which ensures strong motor movement and braking, along with effective isolation of the microcontroller from the H-bridge and motors.

Bridge control is achieved via PWM.

Important: DO NOT send a HIGH signal to both pins dedicated to the direction of rotation (L_PWM and R_PWM).

 

Specifications:

Supply voltage: 5.5 - 27V

Logic voltage: 5V

Temperature protection: Yes

Overvoltage protection: Yes

Current protection: Yes

Short circuit protection

Signal: PWM or 5V

PWM frequency: up to 25KHz

Dimensions mm: 40 x 50 x 12mm

 

Pins:

 

Instructions:

The H-bridge can be used in two different configurations:

Setup 1:

VCC - 5V from Microcontroller

GND - GND from Microcontroller

L_PWM - PWM or 5V signal, counterclockwise rotation

R_PWM - PWM or 5V signal, clockwise rotation

R_EN and L_EN - 5V from Microcontroller

 

Setup 2:

VCC - 5V from Microcontroller

GND - GND from Microcontroller

L_PWM - 5V from Microcontroller, counterclockwise rotation

R_PWM - 5V from Microcontroller, clockwise rotation

R_EN and L_EN - PWM signal from Microcontroller

9181

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Website: www.sigmanortec.ro

Persoana responsabila in UE:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Documentatie si siguranta:

Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].