Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Panel Type-C Connector, Female, with JST PH 2.0mm
Simple solution for adding a USB Type-C power input on panels and enclosures, it mounts securely with a thread, nut, and sealing ring, includes a flexible cable of approximately 15 cm, terminated with a 2.0mm JST PH connector with 2 pins for quick connection to VCC and GND, supporting up to 24V and 2A, without active components.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Panel Type-C connector, female type, equipped with thread, locking nut for fastening, and a 2-pin JST PH 2.0 mm connector for power supply (positive and negative), simplifying integration into various devices or panels. It is compatible with the USB Type-C standard and is intended exclusively for power applications, without support for data transfer.
Specifications:
Connector 1: USB Type-C
Connector 2: JST PH 2.0mm with 2 pins (VCC and GND)
Mounting: Panel mount
Cable length: ~15 cm
Recommended current and voltage: 24V / 2A
Dimension diagram:
Usage:
Cut a hole with the appropriate diameter in the case panel. Insert the connector from the front, install the sealing ring on the back, then secure it with the supplied nut.
Attention! This module does not provide additional protection (no diodes, resistors). It is only a mechanical intermediary.
Package contents:
1 x Female USB Type-C connector cable with JST PH 2.0mm plug
1 x Locking nut
1 x Sealing ring
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
