Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Optical fingerprint sensor, Biovo, C3
Optical fingerprint sensor module for access control and authentication in embedded projects, automatically starts scanning upon touch and stores up to 200 fingerprints in flash memory. Offers 500 dpi resolution and 0.45 s scanning time, easily connects via UART TTL interface to development boards, the package includes wires with plug for quick assembly.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Optical fingerprint sensor module, Biovo, plus connection wires with plug (included in the package)
This module scans the fingerprint and can store up to 200 fingerprints in the flash memory. The scanning process starts when the sensor is touched.
Later, through serial connection, this module can be connected to any development board.
Specifications:
Model: C3
Manufacturer: Biovo
Supply voltage: 5V
Resolution: 500dpi
Storage capacity: up to 200 images
Signature file: 256bytes
Model file: 512bytes
Scan time: 0.45 seconds
False acceptance rate: <0.001%
False rejection rate: <1.0%
Interface: UART TTL
Scanning window dimensions mm: 18.5 x 14.6mm
Dimensions module mm: 47.65 x 20.5 x 21.2mm
Included in the package:
1 x Fingerprint sensor
1 x Set of wires with connector
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
