Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Complete hotend kit, Ender 3 compatible, 24V, 40W
Complete kit for quick replacement of the hotend on Ender 3, provides stable printing and constant filament flow. Includes head assembled with 0.4 mm nozzle, 24V 40W heating cartridge and thermistor, supports up to 260C, aluminum, stainless steel and brass construction, comes with pneumatic connectors and PTFE tube for precise feeding.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Complete MK8 hotend kit, compatible with Creality Ender 3, CR10, CR-10S, S4, S5, Ender-3S.
The set includes all the necessary parts to completely replace the hotend in Creality printers that use this type of hotend.
CAREFUL! The kit uses a 24V heating cartridge. The kit does not include the plugs that go into the motherboard.
Specify:
Heating cartridge supply voltage: 24V
Heating cartridge power: 40W
Minimum operating temperature: -40 degrees C
Maximum operating temperature: 260 degrees C
Materials used: Aluminum, Stainless steel, Brass
Print head size: 0.4mm
Compatible silicone cover: MK8
Content:
1 x printhead assembled with 0.4mm nozzle
1 x thermistor
1 x heating element 24V, 40W
2 x pneumatic connector
1 x PTFE hose
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
