Blue Teflon tube, PTFE, 2x4mm, filament 1.75mm, 1 meter

Blue Teflon Tube, PTFE, 2x4mm, 1.75mm filament, 1 meter

In Stoc

Blue PTFE tube for precise guidance of 1.75mm filament, reduces friction and improves feeding in 3D printers, compatible with Bowden extruders and use in the thermal head, made of temperature and wear-resistant Teflon, inner diameter 2mm and outer diameter 4mm, length 1 meter cut to order.

16.01 RON

Kapton tape 25m, 25mm

In Stoc

Kapton Tape 25m, 25mm is ideal for masking and electrical insulation in high temperature applications such as PCB protection and industrial processes. The polyimide film with silicone adhesive withstands up to 260 C long term and 300 C short term, has excellent heat and solvent resistance, minimal bake shrinkage and removes cleanly.

26.66 RON

Kapton tape 25m, 10mm

In Stoc

Kapton tape 10mm x 25m is ideal for masking and electrical insulation in high temperature applications, made of polyimide film with silicone adhesive. It withstands up to 260 C continuous and 300 C short term, has excellent heat and solvent resistance, minimal shrinkage after baking and removes cleanly, suitable for PCB, etching, automotive and 3D printers.

12.10 RON

E3D V6 heating block, new version

In Stoc

Aluminum heating block for E3D V6 J-head heads, ideal for stable extrusion and efficient heat transfer. Accepts M6 threaded nozzles, has a 6mm hole for the heating cartridge and 3mm for the sensor, compatible with PT100. New Volcano type version, with screw-on thermistor fixation, suitable for 1.75 or 3mm filament.

9.09 RON

Heating block e3d v6, MK7/MK8

In Stoc

The E3D V6 hotend heating block, compatible with MK7 and MK8, ensures stable heat transfer for uniform filament melting and consistent 3D printing. Made of aluminum for fast heating and good temperature distribution, it offers secure fixation of the heating cartridge and thermistor, has a standard nozzle thread and allows easy mounting on most DIY configurations.

6.66 RON

Hotend heating cartridge 12v 40W

In Stoc

Ensures fast and stable heating of the hotend for 3D printers, ideal for maintaining constant temperature during printing. Operates at 12V and 40W for efficient heat transfer, stainless steel housing for durability, cartridge format with 6mm diameter and 20mm length for standard mounting, 100cm cable for easy connection.

10.04 RON

Connector PC4-01, Yellow, M10

In Stoc

Pneumatic connector for 4mm PTFE tube, ideal for 3D printers, especially for mounting in the E3D print head assembly with M10 thread. Ensures firm fixation of the tube by locking, the tube cannot be pushed or pulled, does not allow the tube to pass beyond the thread. Inner diameter 3mm, yellow finish for quick identification.

5.57 RON

PC4 connector, M6, ID 4mm

In Stoc

PC4 pneumatic connector with M6 thread for PTFE tube with 4mm outer diameter, ideal for stable filament guidance in 3D printers, usually mounted in the filament pusher, ensures quick push fit fastening, firm grip of the tube without play and good sealing for constant and precise feeding.

2.93 RON

PC4 M6 connector, 4mm, Yellow

In Stoc

Pneumatic connector with M6 thread for 3D printer filament supply systems, ideal for pusher mounting, ensures quick and firm clamping of 4 mm PTFE tube, compact body with 6 mm thread outer diameter for easy integration, yellow finish for quick identification, stable and precise connection.

2.59 RON

PC4-01, M10 connector

In Stoc

Pneumatic connector for 3D printers, ideal for securely guiding the 4mm PTFE tube into the E3D print head assembly. It has an M10 thread for firm mounting, push-fit quick release for easy tube insertion, keeps the tube fixed for stable filament feeding, outer thread diameter 9.5mm.

4.36 RON

Silicone protection MK8, MK7

In Stoc

Heat-resistant silicone cover for the MK7 and MK8 heating block, effectively protects against melted plastic and dirt, helps maintain stable temperature, especially when using a cooling fan for printing, withstands up to 260 degrees C, color varies depending on the batch, heating block is not included.

3.69 RON

Silicone print head protection e3d v6

In Stoc

Silicone cover for the print head, resistant up to 260 degrees C, maintains heat in the heating block for more stable temperatures, protects the heater from deposits and plastic leaks, is quick to install and is E3D V6 compatible. Color varies depending on the batch.

8.36 RON

Print head nozzle 0.5mm , MK8

In Stoc

Ensures precise extrusion and uniform finish in 3D printing, being made of bronze for strength and good heat transfer. Compatible with most MK8, MK7, E3D V5 and E3D V6 extruders, has M6 thread and 0.5 mm diameter for a good balance between detail and speed. Suitable for 1.75 mm filament.

4.84 RON

e3d print head nozzle 0.4mm , stainless steel

In Stoc

Ensures precise extrusion and uniform layers in 3D printing, made of wear-resistant and high-temperature stainless steel, with a 0.4 mm orifice for fine details and stable flow. It has an M6 thread and is compatible with most mk8, mk7, e3d v5 and e3d v6 extruders, designed exclusively for 1.75 mm filament.

6.39 RON

e3d print head nozzle 0.3mm

In Stoc

Ideal for 3D printing with fine details and precise layers, this bronze nozzle offers stable flow and good wear resistance. It is compatible with most common extruders, including MK7, MK8, E3D V5 and E3D V6, has an M6 thread and a diameter of 0.3 mm, and is designed for 1.75 mm filament.

4.84 RON

Print head nozzle 0.4mm , MK8

In Stoc

0.4 mm printing nozzle for 3D printers, ideal for precise extrusion and uniform finish in common prints. Made of bronze for strength and thermal stability, compatible with MK8, MK7, E3D V5 and E3D V6 extruders. Mounts on M6 thread with 5 mm thread length, recommended for 1.75 mm filament.

4.84 RON

Print Head Nozzle 0.3mm , MK8

In Stoc

Bronze nozzle for 3D printing head, ideal for precise extrusion and fine details. 0.3 mm orifice provides cleaner layers, M6 thread ensures quick assembly, is compatible with MK8, MK7, E3D V5 and E3D V6 extruders, works with 1.75 mm filament.

4.84 RON

Print Head Nozzle 0.2mm , MK8

In Stoc

Ideal for high-precision 3D printing, this 0.2mm MK8 nozzle delivers precise detail and even layering. Compatible with MK8 extruders, it ensures stable filament flow, good tolerances for consistent results, and is suitable for small prints, text, and models with fine details. The durable construction withstands repeated use and quick changeover.

4.84 RON

Hotend extruder neck v6

In Stoc

V6 hotend neck for E3D extruder, designed for precise filament guidance and constant feeding in 3D printing. It has PTFE tube inside for 1.75 filament, M6 thread on the hotend and M7 thread compatible with E3D radiator, ensures quick assembly and good sealing, suitable for upgrade or replacement in V6 assemblies.

3.57 RON

Filament pusher kit 1.75, MK8, metal, Right

1.75 filament pusher kit, MK8, metal, Right

In Stoc

Full metal filament pusher for Bowden extruder, ensures stable and precise feeding for 1.75 mm filament, MK8 compatible, right-hand drive according to the assembly in the picture, constructed of aluminum for rigidity and wear resistance, yellow or brown finish depending on the batch.

31.46 RON

Complete kit e3d v6, direct, 12V

In Stoc

Complete kit for direct extrusion 3D printers, ideal for stable melting and precise printing. Operates at 12VDC, includes heating block with 40W cartridge and thermistor for good temperature control, 0.4 nozzle for balanced details, heatsink with fan and support for efficient cooling and reduced clogging.

50.76 RON

Complete kit e3d v6, Bowden, 12V

In Stoc

Complete e3d v6 type kit for Bowden configurations on 3D printers, ideal for long distance power supply and stable extrusion at 12V. Includes heating block with 40W cartridge and thermistor for precise temperature control, 0.4 mm nozzle for balanced prints, radiator with fan for efficient cooling, plus pneumatic connectors and Teflon tube for safe filament guidance.

55.73 RON

J-Head 2 in 1 extruder kit, Bowden, mixed colors

In Stoc

Allows mixing of two colors in a single print head, ideal for gradient effects in Bowden configurations. Includes common hotend with a single thermistor and a single heater, 12V 40W heater for stable heating, requires connection to two stepper motors and firmware modifications, teflon tube to the motor is not included.

56.47 RON

Teflon tube PTFE, 2x4mm, filament 1.75, 1 meter

In Stoc

PTFE tube for smooth guiding of 1.75 filament in 3D printers, reduces friction and improves feeding to the extruder. Size 2x4 mm, length 1 m, Teflon material with good temperature and wear resistance, smooth interior for constant flow and wide compatibility with Bowden systems.

8.29 RON

5mm filament gear wheel, 40 teeth

In Stoc

The 5mm shaft brass gear, compatible with Nema17 motors, ensures constant and precise filament pushing to the extruder for stable 3D printing. It has 40 teeth for good filament grip, wear-resistant construction, quick assembly on the shaft, suitable for MK7, MK8 extruders and Bowden systems.

3.70 RON

5mm filament gear wheel, 26 teeth

In Stoc

Brass gear wheel for 5mm shaft on Nema17 motors, ensures constant filament push to the extruder for precise feeding on 3D printers. It has 26 teeth for good adhesion and efficient torque transfer, compatible with MK7, MK8 extruders and Bowden systems, wear-resistant metal construction, quick assembly on the shaft.

6.05 RON

NTC thermistor 100k

In Stoc

NTC thermistor with wire and glass head for precise temperature measurement of heating cartridges for 3D printers, 100K Ohm at 25C with 1% accuracy, supports up to 300C in the range -40 to +300C, 1m cable for flexible mounting, model NTC 3950 with 2mm head for fast response.

9.68 RON

Concave gear wheel, MK8, 9x5x11mm, steel

In Stoc

Concave wheel for filament pusher, compatible with MK8 extruder, ensures constant feeding and good adhesion on 1.75mm. It is made of steel for wear resistance, has an inner hole of 5mm, outer diameter of 9mm and length of 11mm. Fastening to the shaft is done quickly with M4 grub screw.

5.01 RON

Concave gear wheel, MK7, 12x5x13mm, steel

In Stoc

Concave filament pusher wheel, ideal for MK7 extruders, ensures stable drive and uniform feeding of 1.75mm. Made of steel for wear resistance, has an outer diameter of 12mm and a length of 13mm, mounts on a 5mm shaft and is securely fixed with an M4 grub screw.

5.03 RON

Hotend heating cartridge, 24V, 40W, 6x20mm

In Stoc

Ensures fast and stable heating of the hotend for constant extrusion on 3D printers, compatible with Ender 3 on 24V. Offers 40W power to maintain temperature, stainless steel housing for durability, 6x20mm cartridge format for easy mounting, 100cm cable for flexible connection.

8.16 RON

Complete hotend kit, Ender 3 compatible, 24V, 40W

In Stoc

Complete kit for quick replacement of the hotend on Ender 3, provides stable printing and constant filament flow. Includes head assembled with 0.4 mm nozzle, 24V 40W heating cartridge and thermistor, supports up to 260C, aluminum, stainless steel and brass construction, comes with pneumatic connectors and PTFE tube for precise feeding.

50.20 RON

Complete Ender 3 hotend kit, 12V, 40W

In Stoc

Complete set for quick replacement of MK8 type hotend on compatible Creality printers, includes assembled head with 0.4 mm nozzle, thermistor, 12V 40W heating cartridge, connectors and PTFE tube. Aluminum, stainless steel and brass construction for thermal stability, working temperature up to 260 C, MK8 compatible silicone cover for insulation and more consistent printing.

60.90 RON

Filament pusher kit, double gear, BMG, with 3 to 1 reducer

Last items in stock

BMG dual gear extruder with 3 to 1 reducer, ensures precise and slip-free filament feeding for stable prints, adjustable clamping tension easily adapts to different materials, compatible with 1.75 mm filament, mounts on most Bowden 3D printers, works with Nema17 motors, stainless steel and plastic construction.

70.65 RON

Filament pusher kit for E3D V6, 3 to 1 reducer

In Stoc

3-to-1 reduction pusher for E3D V6, with support for Direct Drive and Bowden, increases feed force and improves filament grip for stable extrusion and more precise retraction. Helps print TPU flexible filaments more easily including long Bowden paths, is compatible with 1.75 filament and Nema17 motor, stainless steel and plastic construction for durability.

48.18 RON

Support plate for E3D V6 extruder, aluminum

E3D V6 extruder support plate, aluminum

In Stoc

Aluminum support for mounting the E3D V6 extruder, ensures rigid fixation and correct alignment of the print head. The metal material helps dissipate heat in the upper area, reducing the risk of clogging and improving printing reliability. Precise, lightweight and durable construction, direct compatibility with E3D V6, quick assembly in common 3D printer assemblies.

12.15 RON

E3D V6 aluminum support, U shape

In Stoc

Aluminum support for the E3D V6 print head, U-shaped, ensures stable mounting and correct alignment of the assembly, the material helps dissipate heat in the upper area to reduce the risk of blockages caused by softening of the filament. Lightweight and durable construction, direct compatibility with E3D V6, ideal for more reliable prints.

14.19 RON

e3d print head nozzle 0.2mm

In Stoc

0.2 mm bronze nozzle for 3D printers, ideal for fine details and precise finishing. Compatible with most MK8, MK7, E3D V5 and E3D V6 extruders, it mounts easily via M6 thread and is suitable for 1.75 mm filament, providing consistent extrusion and clean results.

4.84 RON

Filament pusher kit for Creality, aluminum, red, LEFT

In Stoc

Full metal upgrade for Creality printer extruder, replaces plastic pusher with aluminum alloy one for more precise and durable feeding. Mounts directly on stepper motor, compatible with MK8 Bowden extruders and CR-7, CR-8, CR-10, CR-10S models. Includes filament guide close to the gear wheel, especially useful for flexible materials, LEFT drive, for 1.75 mm filament.

37.34 RON

Filament pusher kit for Creality, aluminum, red, RIGHT

In Stoc

Full metal upgrade for Creality printer extruder, replaces plastic pusher and improves stable filament feeding. Aluminum alloy block, direct mounting on stepper motor, right-hand drive, includes filament guide close to gear for better control, especially useful for flexible materials. Compatible MK8, CR-7, CR-8, CR-10, CR-10S, 1.75 mm filament.

45.74 RON

MK8 printing nozzle, 0.4mm , PTFE coated

In Stoc

The 0.4mm MK8 nozzle ensures precise extrusion and uniform layers for stable 3D printing. The calibrated tip offers good details and consistent flow, the PTFE-coated base reduces material adhesion and the risk of clogging, the wear-resistant construction maintains performance over time, compatible with MK8 hotends for quick replacement.

7.32 RON

Fast printing nozzle, MK8, 0.4mm

In Stoc

High Flow MK8 0.4mm Nozzle for 3D Printing, allows for higher speeds through the split internal channel that increases filament contact with the heated area. Copper interior for fast heat transfer, brass exterior for strength and durability. Compatible with MK8 hotends, including Ender 3 printers.

12.39 RON

New

PTFE Tube for 3D Printers, ID 2.5mm, OD 4mm, 1m

In Stoc

Guide 1.75 mm filament to the extruder with minimal friction for consistent feeding and cleaner prints. PTFE with excellent glide, 2.5 mm ID and 4 mm OD, 1 m length, easy to cut to the desired size. Compatible with PC4-M6 and PC4-M10 connectors, recommended as a replacement for Bambu Lab and AMS.

10.94 RON

1.75mm filament soldering tool

In Stoc

Aluminum connector for bonding 1.75 mm 3D filament ends, ideal for joining two rolls and combining colors of the same material, reduces waste and allows printing to continue without interruption. Compatible with PLA, ABS and other 1.75 mm filaments, internal guide for correct alignment, easy to use with a lighter to melt the ends.

45.33 RON

PTFE tube cutter, 90 degrees

In Stoc

Mini portable cutter for precise 90 degree cutting of PTFE tubes, ideal for 3D printing and replacing the tube end in the hotend area. The V-guide holds the tube correctly, and the triangular stainless steel blade cuts by sliding for a clean section, without deformation. Helps to form a tight seal with the print head, reducing the risk of leaks and blockages.

10.22 RON

Extruders

Subcategories