Ramps 1.4 LCD and SD card adapter

In Stoc

Allows you to connect a 2004 or 12864 LCD display with controller to the Ramps 1.4 board, for quick control of the 3D printer without a PC. Includes SD card reader for direct file playback, IDC connectors for simple wiring, compatibility with Marlin and other common firmware, easy assembly and stable integration into the system.

8.47 RON

Hotbed arc

In Stoc

Arc hotbed based on Arc ensures uniform and stable heating of the 3D printer bed for better adhesion and reduced deformation. Compatible with adjustable heated bed, it has a compact size of 1.2 x 9.2 x 15 mm, fast thermal response, simple assembly and secure connection, suitable for intensive use in technical projects.

5.00 RON

Out-of-Stock

Threaded rod guide shaft T8 400mm

In Stoc

T8 threaded rod for Z axis of 3D printers and mini CNC, ideal for smooth and precise movements. It has a diameter of 8mm and a length of 400mm, trapezoidal thread with 8mm pitch and 4 starts for rapid feed, it is usually used with an elastic coupling to the motor to compensate for small deviations.

39.59 RON

10-pin ribbon cable, 2X5, 20cm

In Stoc

10-pin 2x5 ribbon cable, ideal for connecting LCD modules to Ramps 1.4 shield in 3D printing and electronics projects. It has a length of 20 cm for flexible mounting, connectors on both ends for quick installation, standard pitch for wide compatibility, flat construction that reduces wiring clutter.

8.11 RON

Out-of-Stock

90 degree aluminum corner 20x20 mm

Out-of-Stock

Aluminum corner for precise 90 degree joining of 20x20 profiles, ideal for 3D printer frames and modular structures. Provides stiffening and stable alignment, has a lightweight and corrosion-resistant construction, quickly mounts with 6 x 9 mm oval holes for fine adjustment, compatible with 2020 type profiles.

4.30 RON

PC4-01, M10 connector

In Stoc

Pneumatic connector for 3D printers, ideal for securely guiding the 4mm PTFE tube into the E3D print head assembly. It has an M10 thread for firm mounting, push-fit quick release for easy tube insertion, keeps the tube fixed for stable filament feeding, outer thread diameter 9.5mm.

4.36 RON

PC4 M6 connector, 4mm, Yellow

In Stoc

Pneumatic connector with M6 thread for 3D printer filament supply systems, ideal for pusher mounting, ensures quick and firm clamping of 4 mm PTFE tube, compact body with 6 mm thread outer diameter for easy integration, yellow finish for quick identification, stable and precise connection.

2.59 RON

PC4 connector, M6, ID 4mm

In Stoc

PC4 pneumatic connector with M6 thread for PTFE tube with 4mm outer diameter, ideal for stable filament guidance in 3D printers, usually mounted in the filament pusher, ensures quick push fit fastening, firm grip of the tube without play and good sealing for constant and precise feeding.

2.93 RON

2GT belt 10mm

In Stoc

2GT timing belt with fiber insert for rigidity, ideal for precise transmissions in 3D printers, CNC and automation mechanisms. It has 2GT pitch for constant synchronization, 10mm width for stability, is delivered by the meter and is continuously cut to the ordered length, so that several pieces in the basket come in a single length.

12.84 RON

Milling cutter for PCB and engravings 0.1mm

PCB and engraving cutter 0.1mm

In Stoc

Tungsten carbide cutter for precise circuit tracing on PCBs and fine engraving in wood or metal, ultra-thin 0.1mm tip for clear details, 10 degree angle for controlled cutting, standard 3.175mm shank compatible with most CNC and mini routers, 33mm length for stability while working.

15.62 RON

2GT timing pulley 20 teeth, 8mm, 10mm belt

In Stoc

Provides precise and silent transmission in GT2 belt systems, ideal for 3D printers, CNC and positioning mechanisms. It has 20 teeth for constant meshing, 8mm bore for stable shaft mounting, compatible with 10mm belt, overall length 19.5mm for easy integration into compact assemblies.

6.82 RON

Filament pusher kit 1.75, MK8, metal, Right

1.75 filament pusher kit, MK8, metal, Right

In Stoc

Full metal filament pusher for Bowden extruder, ensures stable and precise feeding for 1.75 mm filament, MK8 compatible, right-hand drive according to the assembly in the picture, constructed of aluminum for rigidity and wear resistance, yellow or brown finish depending on the batch.

31.46 RON

LCD + Control + SD Card for Ramps 1.4

In Stoc

LCD panel with controller and SD card reader for 3D printers, allows direct operation and monitoring without a PC. Offers easy navigation through menus, starting and managing prints from SD card, clear display of parameters and complete interface with encoder and buttons. Connection to Ramps 1.4 is quick with the included adapter and cables.

71.89 RON

RRD Ramps 1.4 module

In Stoc

2-channel PWM expansion module for Ramps 1.4, ideal when after upgrading to dual extruder you no longer have free PWM outputs or you want to add fans, LEDs and other controlled accessories. Mounts directly on servo pins, adds channels on D6 and D11, supports up to 20VDC and 0.5A per channel, compatible with Marlin by setting MOTHERBOARD 34.

12.28 RON

Stepper Motor, Nema17, 1.8 degrees, 1.5A, 42x42x34mm

Out-of-Stock

Stepper Motor, Nema17 1.7A, 1.8 degrees, 42x42x40mm

Out-of-Stock

Stepper motor for precise axis drive on 3D printers and CNC routers, compatible with A4988 and DRV8825 drivers. Offers 1.8 degree step for fine control, 1.7A current per phase with 2 phases for stable torque, 40N.cm holding force for secure positioning, compact 42x42x40mm format suitable for integration into standard assemblies.

57.92 RON

Nut for Hotbed M3

In Stoc

Knob nut with M3 thread for quick bed level adjustment on 3D printers, used together with M3 screw and spring for fine and stable adjustments. It rotates easily by hand due to the serrated edges, provides a secure grip, is made of stainless steel for wear and corrosion resistance, suitable for hotbed.

6.05 RON

Out-of-Stock

Aluminum profile 2020 V-Slot, 10cm

Out-of-Stock

Extruded aluminum profile 2020 type V-Slot, ideal for CNC frames and 3D printers, 20x20 mm section, compatible with V-Slot rollers and accessories, rigid and easy to assemble, technical finish. The price is for 10 cm, add to cart multiple of 10 cm, the desired details can be noted in the Comments field, manual cutting with a tolerance of up to 2 mm, there may be fine handling scratches.

3.97 RON

POM V-Slot Roller

In Stoc

The POM V-Slot roller for 20x20 aluminum profiles ensures smooth and precise sliding on CNC axes and 3D printers. Includes 2 625zz bearings for stable rolling and low friction, has an inner diameter of 5 mm and an outer diameter of 23.89 mm, thickness of 10.23 mm, wear-resistant material for long-term use.

8.25 RON

Sealed bearing KFL08

In Stoc

Suitable for axis guides with 8 mm threaded rods, it provides stable support and precise alignment in CNC, 3D printer or automation applications. It has an 8 mm internal diameter for quick mounting, robust zinc die-cast housing, encapsulated construction for protection against dust and wear, smooth operation with reduced vibrations.

8.86 RON

T8 nut set, anti backlash, with spring, pitch 8mm

In Stoc

An effective upgrade for precise movements on T8 leadscrew axes, the two spring nuts compensate for play and reduce backlash, providing an affordable alternative to ball nuts, suitable for Mini CNC kits. 8 mm pitch, 4-start trapezoidal thread, brass body, 4-hole M3 mounting for stable mounting.

10.60 RON

CNC Shield v3 Arduino UNO

In Stoc

The CNC Shield v3 for Arduino UNO is the practical base for controlling a CNC or 3D printer, offering 4 slots for A4988 or DRV8825 drivers, 12-36V power supply and dedicated pins for motors, limit switches and peripherals. It allows setting microstepping via jumpers and works great with GRBL firmware for precise automation projects.

17.62 RON

Shield Ramps 1.4

In Stoc

Mega 2560 compatible shield for CNC projects and 3D printers, provides stable control for up to 5 motor drivers and supports dual extruder and heat bed configurations. It operates at 12-24VDC, includes jumpers for setting the drivers' microstep and allows the connection of an LCD with offline printing option from SD card.

32.67 RON

SK8 guide axle support

In Stoc

Support for precise fixation of 8 mm guide axes in CNC applications, 3D printers and linear mechanisms. Rigid aluminum body for stability, firm screw fastening for quick assembly, constant rod alignment for smooth movement, resistant to vibration and wear in industrial use.

9.20 RON

T Nut EU20 M4 aluminum profile 2020

In Stoc

M4 threaded locking element for quick and secure attachment of accessories to 2020 type aluminum profiles, inserted into the channel and ensures firm fixation without additional processing, compatible with 2020 profile and similar models, ideal for frames, 3D printers and light automation.

1.69 RON

2GT timing pulley 20 teeth, 5mm, 10mm belt

In Stoc

Ensures precise transmission of motion in timing belt mechanisms, suitable for 3D printers, CNC and automation. 2GT profile for constant pitch and reduced slippage, 20 teeth for balanced ratio, compatible with 10mm belt, 5mm bore for quick mounting on shaft.

6.95 RON

Pneumatic connector PC4-M6, CR10

In Stoc

Quick pneumatic connector for 4 mm PTFE tube, ideal for Creality Ender 3D printers and other Bowden systems with M6 threaded extruder. Ensures firm fixation of the tube and constant filament supply, easy to assemble, has a precise M6 thread, is made of brass for strength and durability.

6.43 RON

M3 Screw Set with Spring and Nut, 3D Printer Bed

In Stoc

3D printer bed height adjustment kit, ideal for fast and stable bed leveling. Includes 40mm M3 screw, spring and knob with nut, made of stainless steel for strength and long-lasting use. M3 thread ensures easy compatibility with most platforms and fine tension adjustment.

2.78 RON

V-Slot roller, POM, type C, 5x15x8.8mm , MR105ZZ

In Stoc

The V-Slot C type POM roller with two MR105ZZ bearings ensures smooth and precise sliding on V-slot aluminum profiles such as 2020, ideal for 3D printer axes and compact CNC systems. It has a 5mm hole, dimensions 5x15x8.8mm , silent running, low wear and good stability in repeated movements.

8.80 RON

Connector PC4-01, Yellow, M10

In Stoc

Pneumatic connector for 4mm PTFE tube, ideal for 3D printers, especially for mounting in the E3D print head assembly with M10 thread. Ensures firm fixation of the tube by locking, the tube cannot be pushed or pulled, does not allow the tube to pass beyond the thread. Inner diameter 3mm, yellow finish for quick identification.

5.57 RON

Shield Ramps 1.6, R6, 5 axes, 12V, 200W

In Stoc

The Ramps 1.6 Shield for Arduino Mega is a 5-axis control board for 3D printers or CNCs, supports 5 A4988, DRV8825 and other drivers simultaneously, provides 12V and 200W power supply with B55NF06C MOSFET up to 10A. Includes gold-plated connectors for secure contact, full heatsink for efficient dissipation and extended power up to 270W, plus a new 2-pin connector.

49.79 RON

Stabilizer filter for stepper motor

In Stoc

The module interleaved between the 3D printer motherboard and the stepper motor optimizes the signal for smoother movement. Reduces vibration and noise, improves the smoothness of printed surfaces and reduces the banding effect. Uses 8 freewheeling flyback diodes for pulse stabilization, compact 40 x 30 mm format, compatible with most 3D printers.

8.70 RON

MKS Gen V1.3 Motherboard, Ramps 1.4, 3D Printer

Last items in stock

Integrated motherboard for 3D printer control, combines MEGA2560 and Ramps 1.4 in a single PCB for easier wiring and increased reliability. Supports up to 5 replaceable stepper drivers compatible with A4988, DRV8825 and TMC2100, operates at 12-24VDC with dedicated power supply and efficient MOSFETs for better heat dissipation, is Marlin compatible and supports LCD 2004 or 12864 with SD.

304.90 RON

Connector PC6-01, Yellow, M10, 6mm

In Stoc

Pneumatic connector for quick and safe connection of PTFE tubes with 6mm outer diameter, ideal in compressed air installations and automation. It has M10 thread for easy assembly, allows the passage of 6mm tube, ensures good sealing and easy disassembly, yellow finish for quick identification in the assembly.

5.57 RON

2GT tensioner pulley, 5mm, without teeth, 10mm belt

In Stoc

GT2 tensioner pulley with smooth surface for tensioning and guiding 10mm 2GT belts in 3D printers and CNC mechanisms. It has bearings with an inner diameter of 5mm for mounting on common axes, is made of aluminum for strength and low weight, outer diameter 17mm with guiding edges and useful width 10mm.

11.42 RON

Stepper motor, Nema17, 1.8 degrees, 42x42x48mm

In Stoc

Nema17 stepper motor for CNC and 3D printer applications, offers precise control at 1.8 degrees per step and 560 mN.m. holding torque. Operates at 3.06 V and 1.7 A, has 2 phases for stable movement, compact dimensions 42x42x48 mm and 5 mm shaft. Includes 4-wire connector for quick integration.

68.18 RON

Support plate for E3D V6 extruder, aluminum

E3D V6 extruder support plate, aluminum

In Stoc

Aluminum support for mounting the E3D V6 extruder, ensures rigid fixation and correct alignment of the print head. The metal material helps dissipate heat in the upper area, reducing the risk of clogging and improving printing reliability. Precise, lightweight and durable construction, direct compatibility with E3D V6, quick assembly in common 3D printer assemblies.

12.15 RON

E3D V6 aluminum support, U shape

In Stoc

Aluminum support for the E3D V6 print head, U-shaped, ensures stable mounting and correct alignment of the assembly, the material helps dissipate heat in the upper area to reduce the risk of blockages caused by softening of the filament. Lightweight and durable construction, direct compatibility with E3D V6, ideal for more reliable prints.

14.19 RON

Control module 3D printer, display 12864, Ramps 1.4, SD card

3D Printer Control Module, 12864 Display, Ramps 1.4, SD Card

In Stoc

Control panel with 12864 LCD for RAMPS 1.4, allows you to run prints directly from SD card without PC, clearly displays printing status and progress, quick menu navigation with rotary encoder for settings, calibration and axis movement, includes buzzer for feedback and STOP button for quick stop, adjustable contrast from potentiometer.

92.75 RON

Filament pusher kit for Creality, aluminum, red, LEFT

In Stoc

Full metal upgrade for Creality printer extruder, replaces plastic pusher with aluminum alloy one for more precise and durable feeding. Mounts directly on stepper motor, compatible with MK8 Bowden extruders and CR-7, CR-8, CR-10, CR-10S models. Includes filament guide close to the gear wheel, especially useful for flexible materials, LEFT drive, for 1.75 mm filament.

37.34 RON

Filament pusher kit for Creality, aluminum, red, RIGHT

In Stoc

Full metal upgrade for Creality printer extruder, replaces plastic pusher and improves stable filament feeding. Aluminum alloy block, direct mounting on stepper motor, right-hand drive, includes filament guide close to gear for better control, especially useful for flexible materials. Compatible MK8, CR-7, CR-8, CR-10, CR-10S, 1.75 mm filament.

45.74 RON

Ball joint, M4, external thread, SA4T

In Stoc

SA4T ball joint with M4 external thread on the right, ideal for Delta 3D printer arms and guide rods, ensures precise movement and angle compensation in mechanisms. It is made of steel for strength, has a total length of 36mm, a thread of 21mm and an inner ball diameter of 4mm.

8.32 RON

PTFE tube cutter, 90 degrees

In Stoc

Mini portable cutter for precise 90 degree cutting of PTFE tubes, ideal for 3D printing and replacing the tube end in the hotend area. The V-guide holds the tube correctly, and the triangular stainless steel blade cuts by sliding for a clean section, without deformation. Helps to form a tight seal with the print head, reducing the risk of leaks and blockages.

10.22 RON

CNC controller, Mach3, 5-axis interface, parallel

In Stoc

CNC interface for Mach3 via parallel port, controls up to 5 axes with stepper motors, USB power supply with separation for PC protection, optical isolation for stable signals, 0-10V and PWM analog output for spindle speed regulation, inputs for E-stop and limits, operates at 12-24V for easy integration into CNC systems.

40.23 RON

Threaded insert set, 330 pieces, M2 to M5, brass

Last items in stock

Brass threaded inserts for 3D printed parts, ideal for adding a strong thread in plastic. Quickly installed by hot-inserting with the tip of the letcon, and the serrated exterior ensures a firm fit without rotation. Includes 330 pieces with sizes M2 to M5, delivered in a transparent box with compartments for easy organization.

100.62 RON

Sealed ball bearing, KP-08, 8mm

In Stoc

Ideal for supporting and precisely guiding an 8mm shaft in industrial and DIY applications, this flange-type encapsulated bearing offers quick and rigid mounting, smooth and stable operation, increased dust protection due to sealing, compatibility with 42mm mounts for easy alignment in compact assemblies.

10.62 RON

Components and Parts

Subcategories