Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
Fast Charging Module, PD 65W, Type-C, 8-30V
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
Fast charging module that supports an extended supply voltage, between 8 and 30VDC, providing support for multiple charging protocols, including PD3.1 (PPS), QC3.0 and SCP.
It has a maximum power of 65W, allowing for fast and stable charging, ensuring extensive compatibility with various devices such as phones or laptops. It also features advanced protections for maximum safety, preventing overvoltage, overcurrent and overheating.
The charging voltage output is achieved through the Type-C interface, its automatic voltage regulation technology guarantees a stable output of up to 20VDC, with a high conversion efficiency (92% - 97%), reducing losses.
ATTENTION: The module supports output up to 20VDC but will NEVER provide a charging voltage higher than the input voltage. For example, if charging at the PD standard with 20VDC is required, the supply voltage must be mandatory higher than 20VDC.
The Type-C port can only be used for charging devices. It does not support battery charging! The battery is charged from a separate power source and charging circuit.
Specifications:
Input voltage: DC 8V - 30V (step-down only, input voltage must be higher than output voltage)
Output voltage: 3.3V - 21V, automatically adjustable depending on the connected device
Maximum power: 65W (ex: 5V/3A, 9V/3A, 12V/3A, 20V/3.25A)
Conversion efficiency: 92% - 97%
Output voltage ripple: <200mV
No-load current: <3mA
Protections: Input overvoltage and undervoltage, input and output overcurrent, output short circuit, overheating
Dimensions: 32 × 20 × 10mm (excluding the Type-C port which protrudes 1mm)
Supported charging protocols:
PD3.1 (PPS), PD2.0
QC2.0, QC3.0 (Qualcomm Quick Charge)
Huawei FCP, SCP
Samsung AFC
MTK PE+1.1 and PE+2.0
Apple Fast Charge, BC1.2
Use:
If you use a 20V - 24V adapter for input, it is recommended to turn on the power supply before connecting the module to avoid failure to activate the 65W charging.
Connect the power supply to the PADs marked with + and - .
The module may increase in temperature during intensive use, which is why it is recommended to use it in a well-ventilated environment.
Use the Type-C port to charge devices (laptop, phone, etc...). ATTENTION! The module does not allow charging the battery!
Reviews (1) - Review moderation
Bine protejat in ambalaj! Aparatul incarca in parametrii specificati in descriere. Testat pe o baterie auto (13,7v) conectata la un ups pt centrala, cun tel. Samsung A15 cu necesar de incarcare de 25W. A incarcat la fel de eficient ca cel original de 220 : la inceput cu 9v si 24-25w, apoi a scazut si mentinut la 18w, iar dupa 80% cu mai putin de 10w. E mai "valabil" decât multe din incarcatoarele auto de pe piata care promit incarcare PD cu 65w sau mai mult, doar ca nu are carcasa de bagat in priza auto! F.f.f. bun! Se poate face o cutie artizanal sau monta in bord.
