Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
ESP-15F module, ESP8266, Serial, WiFi, 32-bit, 5V
WiFi module based on ESP8266, ideal for quickly connecting Arduino and IoT projects to the 2.4GHz network, interfaces simply via serial UART at 115200 bps, runs on 32-bit architecture with 5V power supply and 3.3V logic, includes PCB antenna for compact installation and supports WEP, WPA, WPA2 security for reliable transmissions.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The ESP-15F module, compatible with Arduino and other development boards, is a wireless communication module that uses the Wi-Fi standard for data transmission. It is based on the ESP8266 microcontroller with a 32-bit architecture and works with a 5-volt supply voltage.
The module is designed to be connected to a device via the serial port. It has a UART interface and supports transfer rates of 115200 bits per second. It can be used in a variety of applications that require wireless connectivity, such as building automation, controlling IoT devices and more.
The module offers support for WEP, WPA-PSK/WPA2-PSK security protocols, which makes it suitable for applications that require high security. It also has low energy consumption.
The board comes with a connection interface with a PH2.54 plug, (the Tata plug with the necessary wires are not included in the package) 4 pins that allow access to the VCC, GND, RX and TX pins. A total of 8 pins are available on the board.
The antenna is integrated directly into the PCB, without the need to add an external one.
Specifications:
Microcontroller: ESP8266, AI Thinker
Architecture: 32 bits
Supply voltage: 5VDC
Logic voltage: 3.3VDC
Supply current: greater than 800mA
Interface: UART, GPIO, ADC, PWM
Serial port transfer rate: 110 - 4608000 bps, default 115200 bps
Flash SPI: 32Mbit
Connection: XH-2.54 plug, 4 pins
Number of pins: 8
Transfer rates: up to 115200 bits per second
WiFi: 2.4GHz
Supported security protocols: WEP, WPA/WPA2
WiFi power: 16dBm
WiFi protocol: 802.11b/g/n
Working frequency: 2400 - 2483.5MHz
Dimensions: 41.3 x 24.1 x 6.6mm
Pinouts:
Description of pins:
TXD: UARTO_ TXD (default 5V)
RXD: UARTO_ RXD (default 5V)
GND: Ground
VCC: Power supply 5VDC, recommended source current 1A
IO4: GPIO4 reserved interface
IO0: GPIO0 - Download mode: Pull Down. Operating mode: float or Pull Up
EN: chip enable terminal, active at high level
IO5: GPIO5 reserved interface
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
