DC 10-55V 60A 3000W motor controller with display

In Stoc

Controls the speed and direction of rotation of DC motors, ideal for industrial applications, robotics or DIY projects. Operates at 10-55VDC, supports up to 60A and 3000W, includes display for quick adjustment and monitoring, offers fine speed control and easy reverse switching.

Ft9,942.60

Adjustable DC 3-18V 2A PWM motor controller

In Stoc

Simple and precise speed regulation for DC motors, through PWM control with good efficiency and low losses. It operates on 3-18V power supply and supports up to 2A, allows smooth speed adjustment with potentiometer, compact design easy to integrate into DIY projects, automation and light industrial applications.

Ft549.01

Stepper motor driver ULN2003

In Stoc

Stepper motor control module, ideal for Arduino projects and simple automation, operates at 4.5-20VDC, accepts High Low 3.3V TTL control signal, provides stable switching for motor coils and has compact dimensions of 32 x 24 x 18 mm for easy integration into assemblies.

Ft370.63

PWM Driver 5A, 90W, 3-35V

In Stoc

Compact PWM module for controlling DC motor speed or dimming LED strips, flexible 3-35V power supply with 3-15V or 5-35V selection, output current up to 5A, controlled power up to 90W, fine adjustment of duty cycle 1-100% at 10kHz, low standby power consumption and 30 x 24mm dimensions for easy integration.

Ft679.82

Stepper driver A4988 + Radiator

In Stoc

Stepper motor driver ideal for CNC and 3D printers, offers precise control with microstepping up to 1/16 and 16 segments, operates at 8.2-35V and supports up to 2A adjustable from the potentiometer, mounts directly on the development board without shield. Includes self-adhesive aluminum heatsink for better thermal dissipation and integrated overcurrent and overtemperature protections.

Ft662.97

Stepper Driver DRV8825

In Stoc

Stepper motor driver, compatible with CNC Shield UNO and Nano, ideal for CNC projects and 3D printers where you need fine control and stable torque. Offers microstepping up to 1/32 for smoother movement, supports up to 2.5A adjustable from the potentiometer, operates at 8.2-45V and includes overcurrent, overtemperature and undervoltage protections.

Ft995.94

PCA9685 module, I2C interface, 16 CH, servo motor

In Stoc

Quickly expand PWM control on Arduino and other boards, using only 2 pins via the I2C interface, to independently control up to 16 servo motors or other PWM loads. It offers 12-bit resolution for smooth movements, adjustable frequency 40-1000 Hz, 5-10 VDC power supply and a compact 60 x 25 mm form factor, ideal for robotics and automation projects.

Ft2,233.69

L298N Double H-Bridge motor driver module

Double H-Bridge L298N

In Stoc

Control the direction and speed of two DC motors between 5 and 35V or a bipolar stepper motor, ideal for projects with Arduino and other development boards. Offers up to 2A per channel, supports PWM up to 40kHz and includes a 5V regulator for the logic part, usable when the power supply is below 12V. Compact dimensions 43 x 43 x 27 mm.

Ft1,156.49

Double H-Bridge MX1508 DC

In Stoc

Compact H-bridge module for controlling 2 DC motors or a stepper motor, ideal for small Arduino projects and battery power. Provides direction and speed control via PWM, operates at 2-10V with up to 1.5A, has extremely low standby power and thermal protection, dimensions 24.7x21x7mm , practical alternative to L298N.

Ft594.59

Double H-bridge L298N V1

In Stoc

Dual H-bridge module for controlling two DC motors or one stepper motor, ideal for Arduino and other boards. Supports TTL and PWM control for direction and speed, delivers up to 2A total and supports power supply up to 46V. Includes over-temperature protection, Schottky EMF diodes, 5V regulator and screw connectors for quick wiring.

Ft1,602.43

DC motor driver module, stepper, L9110S, H-bridge, 2.5V-12V

In Stoc

Dual H-bridge module for direction and speed control, ideal for two DC motors or one stepper motor, compatible with Arduino and other development boards. It uses the L9110S driver, operates at 2.5-12V, supports up to 0.8A per channel, has 6 pins for quick connection and compact 28 x 21 mm PCB with 3 mm mounting holes.

Ft341.89

Voltage and speed regulator SCR 4000W, 220VAC

In Stoc

Continuously regulates voltage and implicitly speed for universal motors, resistors, heaters or lighting, 220V AC power supply with adjustable output 10-220V. SCR module with double insulation and aluminum housing for heat dissipation and safety, supports up to 4000W on resistive loads, includes anti-spike and surge protections for stable operation.

Ft2,576.57

Voltage Regulator SCR AC 4000W, temperature protection

SCR AC Voltage Regulator 4000W, temperature protection

In Stoc

AC regulator with SCR for power control in dimmer applications and motor speed regulation, offers smooth voltage adjustment from 0-220V to 220V AC, supports up to 4000W with continuous use recommendation up to 2000W, has efficiency over 90% and integrated thermal protection, compact format 85x55x38 mm with 6 mm potentiometer.

Ft2,371.44

SCR AC Voltage Regulator 4000W

In Stoc

SCR AC 4000W voltage regulator for fine control of light intensity or speed of compatible motors, mounted in series on the 220V circuit and allows voltage adjustment between 10 and 220V. Offers efficiency over 90% and is ideal for resistive loads, being a simple solution for power regulation in domestic or industrial applications.

Ft2,204.95

CNC Shield v3 Arduino UNO

In Stoc

The CNC Shield v3 for Arduino UNO is the practical base for controlling a CNC or 3D printer, offering 4 slots for A4988 or DRV8825 drivers, 12-36V power supply and dedicated pins for motors, limit switches and peripherals. It allows setting microstepping via jumpers and works great with GRBL firmware for precise automation projects.

Ft1,442.88

Shield Motor Control Module, L293D, 5-12V

In Stoc

The L293D shield for Arduino simplifies motor control in robotics projects, providing control for up to 4 bidirectional DC motors or 2 stepper motors and 2 servo motors. It operates at 5-12V, delivers up to 1.2A, separates logic from power for stability, has a 74HC595 register for pin expansion, and screw terminals for quick connection.

Ft1,286.80

Shield Ramps 1.4

In Stoc

Mega 2560 compatible shield for CNC projects and 3D printers, provides stable control for up to 5 motor drivers and supports dual extruder and heat bed configurations. It operates at 12-24VDC, includes jumpers for setting the drivers' microstep and allows the connection of an LCD with offline printing option from SD card.

Ft2,675.67

Servo and ESC tester

In Stoc

Compact module for quick testing of up to 3 servos or ESCs, useful for calibration and bench testing. Includes button for switching between manual modes with potentiometer, neutral for centering, automatic for full travel between limits. Operates at 4.2-6VDC with low consumption, small size for easy integration into the service kit.

Ft803.69

Speed control module, lowering, raising, 2.5-8V, 5W, USB

Speed control module, lower, raise, 2.5-8V, 5W, USB

In Stoc

Finely controls the speed of DC motors or fans, with continuous adjustment via the integrated potentiometer and minimum stop function. Convenient power supply via USB male or MicroUSB, adjustable output 2.5-8V for adaptation to various applications, maximum power 5W and compact dimensions for easy integration into projects.

Ft784.86

Power H-bridge BTS7960 43A motor driver module

Power H-bridge, motor driver, BTS7960, 43A

In Stoc

H-bridge module for controlling high-torque DC motors, ideal for Arduino and other boards, delivers up to 43A and operates at 5.5-27V. Integrates BTS7960 and 74HC244 for stable PWM control up to 25kHz, offers temperature, overcurrent and short circuit protection, and the generous heat sink ensures strong starting, acceleration and braking in demanding applications.

Ft2,907.56

Shield Ramps 1.6, R6, 5 axes, 12V, 200W

In Stoc

The Ramps 1.6 Shield for Arduino Mega is a 5-axis control board for 3D printers or CNCs, supports 5 A4988, DRV8825 and other drivers simultaneously, provides 12V and 200W power supply with B55NF06C MOSFET up to 10A. Includes gold-plated connectors for secure contact, full heatsink for efficient dissipation and extended power up to 270W, plus a new 2-pin connector.

Ft4,077.92

Stabilizer filter for stepper motor

In Stoc

The module interleaved between the 3D printer motherboard and the stepper motor optimizes the signal for smoother movement. Reduces vibration and noise, improves the smoothness of printed surfaces and reduces the banding effect. Uses 8 freewheeling flyback diodes for pulse stabilization, compact 40 x 30 mm format, compatible with most 3D printers.

Ft712.52

PWM motor speed controller, reversible, with button, 6-28V, 3A

In Stoc

Module for controlling the speed and direction of a DC motor via PWM, ideal for projects and automation. Operates at 6-28VDC, provides current up to 3A, includes potentiometer for fine speed adjustment and 3-position button for rotation in both directions and stop. Compact, 32 x 50 x 15 mm, with 3 cm wires for the button.

Ft1,587.57

ESC 20A, brush motor, 2S, for RC, FW, RV, BRK functions

In Stoc

Brushed motor controller for RC applications, provides forward, reverse and brake for precise control. Operates at 3-9.4V, compatible with 2S Li-Po or 4-7S Ni-Cd, supports 20A continuous and up to 50A pulse, compact 20x20mm format, suitable for 130, 180, 260, 280, 380 motors. Simple connection, battery on pins 1 and 4, motor on 2 and 3.

Ft2,337.75

BLDC controller, 3 phases, 5-36VDC, 15A

In Stoc

Module for controlling 3-phase brushless motors, 5-36VDC power supply and current up to 15A, ideal for DIY projects, automation and industrial applications. Offers fine adjustment of speed from the potentiometer and change of rotation direction from the switch. Sensorless operation based on BEMF, for stable control without Hall sensors, compact format 60x80 mm.

Ft9,967.38

Radio control module, 4CH, receiver with transmitter, 40MHz

In Stoc

40MHz 4-channel transmitter receiver pair, ideal for DIY remote control projects, allows control of two motors in both directions for forward, reverse and direction. It operates at 3-4.5V on the transmitter and 4.5-6V on the receiver, has a range of up to 10 m, offers simple connections for 130 type motors and includes antennas for stable transmission.

Ft1,856.12

Motor driver module, dual H-bridge, DRV8833, 1.5A

In Stoc

Compact dual H-bridge driver based on DRV8833 for controlling one 4-wire stepper motor or two independent DC motors, ideal for Arduino and other development boards. Offers separate PWM control on each channel, 1.5A per motor at 3-10V, overcurrent, short circuit, undervoltage and temperature protection, plus sleep mode for low power consumption.

Ft498.47

Stepper motor driver, TB6600, 0.2-5A

In Stoc

Driver for 2 and 4 phase stepper motors, ideal for Nema17, Nema24 and Nema34, offers adjustable current 0.5-5A and microstepping 1, 2, 4, 8, 16 for smooth and precise movement. Optoelectronically isolated inputs for fast control, sinusoidal bipolar PWM for reduced vibrations. Aluminum housing for efficient cooling and increased protection.

Ft8,871.34

Panel PWM signal generator, LCD, 3.3-30V, 5-30mA, 1Hz-150KHz

In Stoc

Panel PWM generator with LCD display, ideal for motor speed control, LED dimming or signal testing, allows precise adjustment of the frequency 1Hz-150KHz and the duty cycle 0-100%, operates at 3.3-30V with amplitude equal to the power supply, remembers settings upon restart and includes keyboard lock to avoid accidental changes.

Ft2,730.18

Panel speed controller, PWM, 6-60VDC, 0-100%

In Stoc

Quickly controls DC motor speed via PWM signal, with 0-100% fine adjustment and digital display for precise setting. Operates at 6-60VDC, supports up to 30A in short peaks, recommended 15A continuous, direct panel mounting with potentiometer and button for immediate motor stop.

Ft2,809.46

Stepper motor driver module, 4 phases, ULN2003, 5-12V

In Stoc

Compact driver for controlling 4-phase stepper motors, ideal for Arduino and automation projects. Integrates ULN2003 for stable control at 5-12VDC, has LEDs on each phase for quick diagnostics, accessible pins with Dupont wires and 5-pin XH2.54 connector for direct connection to NEMA17 and 28BYJ-48 motors, dimensions 40 x 20 mm.

Ft407.30

Speed and direction control module, PWM, 9-50V, 40A, 2000W

In Stoc

PWM controller for brushed DC motors, ideal for smooth speed control and direction change. Operates at 10-55V and supports up to 40A continuously, providing power up to 2000W. Includes potentiometer for 0-100% speed, 3-position switch for direction and stop, plus external display for clear display.

Ft4,920.27

Brushless Motor Driver Module, 3 or 4 wires, without sensor

Out-of-Stock

Brushless Motor Driver Module, 3 or 4 wires, sensorless, CW-CCW selector, 5-12VDC

Out-of-Stock

Quickly control 3- or 4-wire sensorless brushless motors without additional components, 7-12VDC power supply for speed adjustment via potentiometer and speed increase with voltage. The direction of rotation is simply selected CW or CCW via jumper, and the board includes reverse polarity, overcurrent and short circuit protection for safe use in projects.

Ft4,551.62

Shield motors for WeMos D1 mini, I2C, Dual motor, TB6612FNG

Motor Shield for WeMos D1 mini, I2C, Dual motor, TB6612FNG

In Stoc

The WeMos D1 mini motor shield provides simple I2C control of two DC motors or one stepper motor, using the TB6612FNG driver with overheat protection. It delivers 1.2A per channel with short peaks up to 3.2A, accepts motor power up to 15V, and allows setting the I2C address from jumpers. Includes standby for low power consumption and fast brake for precise stopping.

Ft3,868.82

Motor speed control module, PWM, 12-40VDC, 10A, Tenstar Robot

In Stoc

PWM module for speed control of brushed DC motors, ideal for fine speed regulation without large torque loss. It operates at 12-40VDC, delivers up to 400W, with 8A recommended and 10A peak, has a PWM frequency of 13kHz and 10-100% potentiometer adjustment, includes fuse and connector for external potentiometer.

Ft1,843.24

Double H-bridge, motor driver, TB6612FNG, 15V, 1A, 2.7-5.5V logic

In Stoc

Compact dual H-bridge driver for precise control of two DC motors or a bipolar stepper in Arduino projects and other boards. Offers better efficiency than L298N, PWM control for speed and direction, up to 1.2A per channel and 15V per motor, includes standby and overcurrent and overtemperature protections.

Ft1,087.12

Double H-bridge, motor driver, DRV8833, 15V, 1A, 2.7-5.5V logic

In Stoc

Allows control of two DC motors or one stepper motor, with adjustable direction and speed via PWM. Supports motor power supply up to 15V and current up to 1A per channel, operates with 2.7-5.5V logic for compatibility with Arduino and other boards, includes overload and overheating protection, compact format for easy integration.

Ft475.68

CNC power supply module, CC-CV, XY6020L, 1200W, 0-60VDC, 20A, step-down

In Stoc

CC-CV power supply module for CNC and automation applications, provides stable power supply for DC motors and consumers, with adjustable voltage 0-60V and constant current up to 20A, maximum power 1200W. The LCD screen allows quick setting and monitoring of voltage, current and power, and cooling with radiator and fan supports operation under load, with integrated overvoltage and overtemperature protections.

Ft19,403.58

BLDC control module, ZS-X12H, 6-28V, 0-100W, PWM Driver, with Hall

In Stoc

Compact driver for BLDC motors with Hall, ideal for pumps and fans, 6-28V power supply and speed control via PWM or onboard potentiometer. Provides stable operation up to 100W with 3.5A, peak 4A, has integrated 5V regulator for Hall sensors and overcurrent and lockout protection. Includes Hall wire set with connector.

Ft3,096.84

ESC BLHeli, 30A, with UBEC, for radio models and drones, 2-4S, 16.8V

In Stoc

Electronic speed controller for brushless motors, ideal for quadcopters, fixed wings and FPV drones, offers 30A continuous and up to 40A peak for safe accelerations. BLHeli firmware ensures fast response and smooth control, and UBEC 5V 3A stably supplies the model's electronics. Compatible with 2-4S LiPo, programmable via FC or card.

Ft7,542.42

Stepper motor driver expansion board, DRV8825 and A4988, 5V

In Stoc

A4988 or DRV8825 driver expansion board, ideal for Arduino UNO R3 and 3D printers, facilitates the control of Nema17 stepper motors in DIY projects. Offers DIP switch for quick microstep setting, terminal connector for easy power supply, compatibility with 12 24VDC and DIR STEP EN interfaces to 5V logic. Correct connection of driver polarity and orientation.

Ft816.58

Stepper motor driver module, 8-24V, direction and speed, Pulse and PWM

In Stoc

Signal controller for stepper motor driver, ideal for simple speed and direction adjustment in a DC powered installation. It operates at 8-24V and generates Pulse or PWM signal, allows selection of three frequency ranges via jumpers, includes potentiometer for speed and latching buttons for start, stop and direction.

Ft2,045.40

Digital stepper motor driver, DM556, 2 phases, 20-50V, 0.5-5.6A

In Stoc

Digital driver for 2-phase stepper motors, ideal in automation with Nema17 and Nema23, offers smooth and precise movement through configurable microstepping, reduces noise and resonance for stable torque at various speeds, allows quick adjustment of current and settings via DIP switch, supports 20-50V and up to 200kHz, includes auto-configuration and integrated protections.

Ft9,892.06

Motor Driver Module, PWM, speed and direction control, 9-60V, 20A, 1200W

In Stoc

Precisely controls the speed and direction of brushed DC motors, via PWM for good torque and high efficiency even at low speeds. Operates at 9-60V and supports up to 20A, offers fine adjustment from potentiometer and CW OFF CCW switch for changing direction or stopping. The metal housing protects the electronics and allows for fixed mounting.

Ft2,898.65

BLDC control module, 3 phases, 400W, 9-60V, motor driver, with Hall sensor

In Stoc

BLDC controller with Hall sensors for 3-phase brushless motors, ideal for industrial projects, robots and DIY applications. Provides precise speed control via integrated potentiometer or external PWM, operates on a wide 6-60V supply and delivers up to 400W with high peak current. Includes forward, reverse, brake and overcurrent protection functions for stable operation.

Ft10,051.61

Double H-bridge module, MX1919H, 2.5A, PWM, 2-10V

In Stoc

Compact dual H-bridge for controlling two DC motors or a 4-wire stepper motor, allows direction and speed adjustment via PWM, operates at 2-10V and accepts 1.8-7V signal, delivers up to 2.5A per channel with high efficiency without a heatsink, includes thermal protection with hysteresis and almost zero standby consumption, compatible with Arduino and other development boards.

Ft1,107.93

IC MX1919, motor driver, DIP-16

In Stoc

Dual brush DC motor driver, ideal for battery-powered applications such as electric toys and low-voltage motion control. Operates at 2-6V, offers bidirectional and speed control via H-bridge, delivers up to 1.6A continuous per channel and 3.5A peak, and low-resistance MOSFETs reduce heat. Includes integrated thermal protection, in a compact DIP-16 package.

Ft469.73

Driving Motor