Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Amplifier module XH-M253, 420W, Mono, HiFi, TDA8954TH, 12-28V
HiFi class D amplifier module, ideal for subwoofers or powerful audio systems, based on TDA8954TH for high efficiency and clean sound. Provides mono output with up to 420W depending on power supply, supports 2-8 Ohm speakers with 4 Ohm recommendation, operates on dual AC power supply 12-28V via 3-wire transformer, includes J13003 rectifier and 2200uF capacitor filtering.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Audio amplifier module with TDA8954, a high-efficiency power integrated, in class D, with a typical output power of 4 Ohm in the load. It uses J13003 transistor bridge rectifier and adopts a series of 2200uF electrolytic capacitors. It has an output on a single channel, with a maximum power of up to 420W.
The power supply is double, between 12V and 28VAC maximum, for which it will be necessary to use a transformer with double output.
Specifications:
Supply voltage: AC, dual, 12 - 28V, through a 3-wire transformer
Output impedance: 2 - 8 Ohm, 4 Ohm speaker recommended
Model: XH-M253
Integrated: TDA8954TH
Output power: 420W, depending on the power supply
Number of channels: 1, Mono
Dimensions mm: 82 x 72 x 37mm
- Type
- Amplifier
- tension
- NEEDLE
- Power
- Over 20W
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
