Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

3.2 inch LCD Display, 240x320, Touch, ILI9341, SD, 3.3-5V

3.2 inch TFT color screen with resistive touch, 240x320 resolution and ILI9341 driver, ideal for graphic interfaces on STM32 and C51 projects. Offers 65K colors display on 8 or 16 bit parallel bus, includes microSD reader on the back for resources and logging, has integrated regulator for 3.3-5V power supply and XPT2046 touch controller for precise interaction.

22.98 € Tax included

18.99 € Tax excluded

(5/5) out of 2 total ratings
Read the reviews

1-2 zile

Shipping by Thursday 27 August

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.

FAST DISPATCH 24H
We ship from our stock within 24H

LOYALTY POINTS
You earn points with every order, worth 5%.

The 3.5-inch color LCD touch display is a practical solution for embedded projects and development systems based on STM32, providing clear display in 65K colors and support for RGB interface in 8 and 16 bits.

It is compatible with ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards, being suitable for applications that require graphical interface, touch commands, and real-time data display. The module uses the ILI9341 graphic controller for stable and precise rendering, and the XPT2046 touch controller allows quick and intuitive interaction.

Includes an SD card reader on the back for functionality expansion and comes with a stylus for easier operation. The module has an integrated 3.3V voltage regulator, allowing power supply at both 3.3V and 5V.

Attention, this display has 34 pins and is not directly compatible with standard Arduino boards. For the Arduino Mega board, 40-pin variants are required.

For more display details See Link

Specifications:

Power supply voltage: 3.3 - 5V

Compatibility: STM32 and C51 platforms

Display size: 3.2 inch

Active area size: 48.6 x 64.8 mm

Resolution: 240 x 320 pixels

Display type: Color TFT LCD

Displayed colors: 65K

Internal power: built-in 3.3V voltage regulator

SD card reader: yes

Number of pins: 34

Driver IC: ILI9341

Data bus: 8/16 bit

Touch: yes

Touch IC: XPT2046

Stylus included: yes

Pin Description:

Pin Number	Pin Label	Description
1	CS	LCD reset control pin, active low
2	RS	LCD register or data selection, high: register, low: data
3	WR	LCD write control pin
4	RD	LCD read control pin
5	RST	LCD reset pin, active low
6	DB0	LCD data bus, least significant bit 0. In 8-bit parallel mode, the lower 8 bits are not used
7	DB1	LCD data bus
8	DB2	LCD data bus
9	DB3	LCD data bus
10	DB4	LCD data bus
11	DB5	LCD data bus
12	DB6	LCD data bus
13	DB7	LCD data bus
14	DB8	LCD data bus, most significant bit
15	DB9	LCD data bus
16	DB10	LCD data bus
17	DB11	LCD data bus
18	DB12	LCD data bus
19	DB13	LCD data bus
20	DB14	LCD data bus
21	DB15	LCD data bus
22	SDCS	SD card selection pin, used for SD extension function
23	BL	LCD backlight control, active high
24	VDD	Module positive power supply, supports 3.3V or 5V due to integrated regulator
25	VDD	Module positive power supply
26	GND	Module ground
27	GND	Module ground
28	NC	Not connected, reserved
29	MISO	SPI bus data input pin for touch
30	MOSI	SPI bus data output pin for touch
31	PEN	Touch interrupt detection, low level when touched
32	F_CS	Flash chip select, used for Flash extension function
33	T_CS	Touch controller chip select, active low
34	CLK	Clock signal for SPI touch bus

Usage:

The display is recommended for automation projects, graphical interfaces for electronic equipment, control systems, and educational or industrial applications based on STM32 microcontrollers.

It connects to compatible boards via parallel interface, and the touch function allows direct control from the screen. For proper operation, it is important to check the compatibility of the pin count and the board used before assembly. The SD card reader can be used for storing images, files, or other data required by the application.

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor: