Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voltage step-down module, multichannel, LM2596, 4-way, 3.3V, 5V, 12V, ADJ
Multichannel buck converter with 4 LM2596 regulators powered from a single source, ideal for projects that require simultaneously 3.3V, 5V, 12V and an adjustable potentiometer output. Provides up to 3A per channel, with high efficiency and stable voltage thanks to quality components, includes general ON OFF switch and removable screw connectors for quick wiring.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Multichannel module that uses 4 separate LM2596 integrated, fed from a single common source. Being a monolithic voltage regulation integrated circuit, it is capable of providing an output current of up to 3A.
It has linear adjustment characteristics and allows the simultaneous generation of four sets of power supplies: 3.3V, 5V, 12V and an adjustable channel (ADJ) through the integrated multi-turn potentiometer.
The module design follows the strict specifications of the power supply circuits, using high-quality components such as SMD electrolytic capacitors and high-power inductors, to ensure a stable output voltage. The special treatment applied to the back of the PCB improves heat dissipation for the LM2596 chip.
The output range of the ADJ channel is from 1.2V to Vin-1V, that is, the supply voltage minus 1V, with a maximum output current of 3A.
The module powers all 4 integrated LM2596 from a single power supply and the outputs with the same voltage can be connected in parallel, but not in series . Each channel is independent, but the channels are not isolated from each other. Putting them in series will burn the integrateds.
The total current must NOT exceed 5A, even if individual modules can lead up to 3A in peaks. The heat dissipation is common on the same board and the input is from a single voltage source (a single connector).
Each output has a dedicated 4-pin output jack. 2 pins for GND and 2 pins for VCC. The pins are with screws and are in the form of a removable connector. Since there are two sets of outputs per channel, two consumers can be connected to each output of the LM2596.
It also has a general ON/OFF button that stops or starts all the outputs.
Specifications:
Integrated: LM2596 (4 ICs)
Source Type: Switched
Supply Voltage: 13 - 32VDC
Output Voltage: Multiple - 3.3V, 5V, 12V, ADJ
Output Current per channel: 3A (MAX per channel)
Total Output Current: MAX 5A
Conversion efficiency: 85%
Output Power: 9W (3.3V), 15W (5V), 36W (12V and ADJ)
Static consumption: 26mA
Operating Frequency: 150KHz
Output Ripple: 15mV (no load); <60mV (12V@2A load test)
Button: ON/OFF general
Operating Temperature: 0-70°C
Dimensions: 101 x 68 x 12 mm
Use:
Make sure the input voltage is between 13V and 32V, and is 1V higher than the desired output voltage to maintain output stability.
The heat generation is proportional to the difference between the input and output voltage and the load current. Depending on the load, it may be necessary to add radiators or other cooling methods.
Be careful when connecting capacitive or inductive loads to avoid high instantaneous current that could damage the module.
The adjustable voltage can vary from 1.2V to Vin-1V, with a maximum output current of 3A. Use the potentiometer for fine adjustments.
Login:
- tension
- AD
- Supply Voltage
- 13
- Maximum Input Voltage
- 32
- Minimum Output Voltage
- 3
- Maximum Output Voltage
- 30
- Source Type
- descend
- Current Adjustment
- Not
- Voltage Adjustment
- Yes
- Adjustment Type
- Variable or Fixed
- Maximum Output Current
- 3
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
