Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voltage step-down module 400W, 10-60VDC, CC-CV, 15A
Step-down DC-DC converter for power supply and battery charging, with continuously adjustable voltage 0-45V and current 0.2-15A in CC-CV mode. Offers up to 400W with active cooling, high efficiency up to 97% and low drop between input and output. Includes short-circuit and reverse polarity protection, plus LED for CC mode.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
DC-DC step-down power supply module, from 10-60VDC to 0-45VDC, CC and CV, continuously adjustable current and voltage.
The absolute maximum power is 400W (active cooling on both the radiator and the coil) and the current can be adjusted up to 15A. In normal use, in a ventilated environment, do not exceed the values of 280W and 12A maximum.
The module is efficient, having between 92 and 96% conversion efficiency when the difference between input and output is less than 10V.
It has a CC mode indicator light, which can also be used as a battery charging completion indicator. The module's operation in CC and CV allows charging batteries.
The input has a 15A fuse.
The module has a minimal voltage drop difference between Input and Output. At low voltage (15V) the pressure difference is approximately 3V. At 40V the difference is approximately 6V.
Specifications:
Supply voltage: 10.5 - 60VDC
Output voltage: 0 - 45VDC, continuously adjustable
Input-Output Voltage Difference: 3 - 8V, increasing with voltage
Constant output current: 0.2 - 15A, continuously adjustable
Output current: 12A in ventilated environment
Output power: 280W in ventilated environment
Maximum output current: 15A with forced cooling
Maximum output power: 400W with forced cooling
Standby power consumption: 2.5W
Low voltage protection: below 10.5V the output is off
High voltage protection: NO , above 60V the module burns out
Operating temperature: -10 - +85 degrees C
Operating frequency: 100KHz
Conversion efficiency: up to 97%
Short circuit protection: Yes
Reverse polarity protection: Yes, the fuse blows
DC indicator: Yes, LED
Dimensions mm: 60 x 60 x 45mm
- tension
- AD
- Supply Voltage
- 10
- Maximum Input Voltage
- 60
- Minimum Output Voltage
- 0
- Maximum Output Voltage
- 45
- Source Type
- descend
- Current Adjustment
- Yes
- Voltage Adjustment
- Yes
- Adjustment Type
- Variable
- Maximum Output Current
- 15
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
