Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voltage and Current Sensor Module, INA260, 36V, 15A
The INA260 module allows you to precisely monitor voltage, current and power in Arduino and other board projects, ideal for batteries, power supplies and motor control. It measures up to 36V and 15A, offers fine resolution of 1.5mA and accuracy of approximately ±1%, communicating simply via I2C at 3.3-5V.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The INA260 module, compatible with Arduino and other development boards, is a high-precision measurement device, capable of simultaneously monitoring voltage, current and power in various applications, such as motor control, battery monitoring, power systems, etc.
This module can detect a voltage of up to 36V and a current of up to 15A.
Specifications:
Operating voltage: 3.3-5V
Maximum voltage that can be measured: 36V
Maximum current that can be measured: 15A
Resolution: 1.5mA
Accuracy: ±1%
Operating temperature: -40 ~ 125°C
Interface: I2C
Dimensions: 23x23x2mm
Weight: 2g
Pinout:
VCC/GND : Logic power supply
SCL/SDA : Data and clock lines for the IIC bus
Alert : Multifunctional alarm output
VIN+ / VIN - : Power supply
Address configuration table:
A1 - GND, A0 - GND I2C: 0x40 (default)
A1 - GND, A0 - VCC I2C: 0x41
A1 - VCC, A0 - GND I2C: 0x44
A1 - VCC, A0 - VCC I2C: 0x45
Use:
Connect the INA260 module to the circuit and the microcontroller via the I2C interface. It will provide real-time current, voltage and power values.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
